How hard is it to replace a blower motor? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 01-04-2004, 11:11 PM

Looks like my blower motor went. I checked when I put on the blower switch I get power to the motor but it is not working. It is a 72 with a/c. Can I get away with just removing the hood hinge, or do I have to remove other parts also?

As always and info is much appreciated.

Thanks.

**kwmech** · 01-04-2004, 11:16 PM

just the hinge-- be sure to make reference marks where the hinge sits so it goes together easier

doughby82 · 01-05-2004, 04:28 AM

to make it easier i just unbolted the hinge from the inner fender and pushed the hood forward a bit

01-04-2004, 11:11 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	How hard is it to replace a blower motor? Looks like my blower motor went. I checked when I put on the blower switch I get power to the motor but it is not working. It is a 72 with a/c. Can I get away with just removing the hood hinge, or do I have to remove other parts also? As always and info is much appreciated. Thanks.

01-05-2004, 04:28 AM	#3
doughby82 Registered User Join Date: Mar 2001 Location: springfield ill Posts: 836	to make it easier i just unbolted the hinge from the inner fender and pushed the hood forward a bit __________________ springfield illinois 2003 custom (harley)built from scratch 68 swb

01-04-2004, 11:16 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,650	just the hinge-- be sure to make reference marks where the hinge sits so it goes together easier



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.