WA 77 GMC Jimmy part out

[chev-obsession]

Parting out this 77 GMC Jimmy. What you see is what I have. Body is rusty, top seems to be pretty good. No motor/trans. 12 bolt rear (need to see if it’s posi) Tailgate and banner is pretty straight, window regulator works well, Tilt auto column, front seats need new foam and covers, rear seat very nice shape, dash pad is one of the better pads I’ve seen in a while, no major cracks but still not perfect, looks like it has a lot of interior trim parts and they seem to be in good condition, body cuts available if desired.

-First “I’ll take gets it”
- I will price parts I have listed
- Parts not listed above, Let me know what you want and I will give you a price and pictures.
-If my price is “way out of line” you can make an offer, Please keep in mind I am pulling the parts, cleaning and taking the time to box them up and ship them.

I am going to give it a week or two and then it’s going to the scrap yard.

Hard top with sliding windows - $800
Tailgate with banner and glass - $500
Steering column $100
Front seats without brackets - $800
Rear seat - $800
Posted via Mobile Device

[chev-obsession]

More pics
Posted via Mobile Device

[chev-obsession]

Posted via Mobile Device

[chev-obsession]

More pics
Posted via Mobile Device

[72BBGMC]

Hey, I'm interested in the column. Shipping to 30252?
Thanks Mark

[chev-obsession]

Originally Posted by 72BBGMC

Hey, I'm interested in the column. Shipping to 30252?
Thanks Mark

Shipping would be $40 through UPS
Posted via Mobile Device

[72BBGMC]

Thanks for the reply. I found one locally.

[Sabaka454]

Do you have the trim piece next to the passenger side seat belt?

[chev-obsession]

Originally Posted by Sabaka454

Do you have the trim piece next to the passenger side seat belt?

That part is there but it’s pretty hammered.

[rwjtexas]

Sounds fair to me, Shipping will be to 77701 my office.... If needed I will provide funds to pack the pieces extra secure in bubble wrap or foam so they are not damaged.

Also I noticed and need to verify, there is no front trim pieces (A Pillar) are there on this vehicle. It's hard to tell in the pictures

What about the Center Console, how is it ? major cracks in lid or back by the hinge ?

Can do do PayPal or Zelle it these work for you .

[chev-obsession]

Originally Posted by rwjtexas

Sounds fair to me, Shipping will be to 77701 my office.... If needed I will provide funds to pack the pieces extra secure in bubble wrap or foam so they are not damaged.

Also I noticed and need to verify, there is no front trim pieces (A Pillar) are there on this vehicle. It's hard to tell in the pictures

What about the Center Console, how is it ? major cracks in lid or back by the hinge ?

Can do do PayPal or Zelle it these work for you .

There are no trim pieces on the A pillar on either side. All trim pieces I have is the flat piece above the door, back to the interface of the top and cab and then down to the floor at the seat belts. Also have the kick panel trim which is really nice as well. Parts will be packed with care and shipping quote will be priced accordingly.

The console in the pics was complete garbage, I threw it away. I have another 77 and earlier console I can sell.

I can send more pictures of trim and condole if you would like.
Posted via Mobile Device

[rwjtexas]

Thanks for checking, as for the console don't worry about it as mine is still in rather good shape.

As for the trim, if you can send some pictures for everything you mentioned. Packing sounds perfect and let me know how you want to handle the financial end.

Thanks !

[chev-obsession]

Originally Posted by rwjtexas

Thanks for checking, as for the console don't worry about it as mine is still in rather good shape.

As for the trim, if you can send some pictures for everything you mentioned. Packing sounds perfect and let me know how you want to handle the financial end.

Thanks !

There’s a couple holes in the side pieces. Otherwise good condition.

[allchevy58]

Hi there, does your Blazer happen to have the positive battery cable clips on the frame, fuel pump and oil pan?

[chev-obsession]

Originally Posted by allchevy58

Hi there, does your Blazer happen to have the positive battery cable clips on the frame, fuel pump and oil pan?

There is a battery cable clip, missing the rubber coating. I would ask $8 shipped

[allchevy58]

Originally Posted by chev-obsession

There is a battery cable clip, missing the rubber coating. I would ask $8 shipped

Sorry, think I'll pass. Looking for one in a little better condition. Thank You

[chev-obsession]

More pics

[rwjtexas]

yea, that's a shame - it looks like those holes were for external speakers. I will take these ... let me know the shipping to 77701

[rwjtexas]

By the way what do the seatbelts look like ? Thanks
Posted via Mobile Device

[chev-obsession]

Originally Posted by rwjtexas

By the way what do the seatbelts look like ? Thanks
Posted via Mobile Device

Pm sent for shipping.

Seat belts are mediocre at best for a driver, some of the rear belts are missing and plastic/rubber is deteriorated and fabric frayed, mechanical parts are good. Can get pics tomorrow. If your interested I would make a good deal on them

[wazzabie]

Do you have the fuel filler hose the goes from the tank to the fuel inlet?

[chev-obsession]

Originally Posted by wazzabie

Do you have the fuel filler hose the goes from the tank to the fuel inlet?

Yes I do, I can drop the tank this weekend and send you a picture

[chev-obsession]

Originally Posted by wazzabie

Do you have the fuel filler hose the goes from the tank to the fuel inlet?

The rubber fuel hose was rotted pretty badly

[chev-obsession]

Ttt