WA Wtb: 68 chevy headlight bucket and trim ring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nitrosport_5** · 02-05-2023, 06:41 PM

Need a pair of headlight buckets and the trim ring thst holds the light in. Not sure where mine ran off to! Screws with the trim ring would be appreciated too!

Thanks

**Orange71shorty** · 02-05-2023, 10:31 PM

Are you looking for steel or aluminum?

**nitrosport_5** · 02-06-2023, 02:31 AM

Quote:

Originally Posted by Orange71shorty

Are you looking for steel or aluminum?

The one I have is stainless, so a match to that would be best

**Jeff's bowtie's** · 02-06-2023, 08:20 AM

Quote:

Originally Posted by Orange71shorty

Are you looking for steel or aluminum?

I think what he is looking for is the metal bucket that the sealed beam light is mounted in and the stainless trim ring that holds it in place with the 3 screws. I think what you are referring to is the outer headlight bezel they were steel or aluminum. Hope this helps

tchevs · 02-06-2023, 10:11 AM

I might have a pair.

**nitrosport_5** · 02-06-2023, 01:30 PM

Quote:

Originally Posted by tchevs

I might have a pair.

If not a pair I could make do with just 1! Thanks!

**Grumpy old man** · 02-06-2023, 03:40 PM

I've got a few sets ,I'll post up pictures shortly .

tchevs · 02-06-2023, 09:58 PM

Quote:

Originally Posted by nitrosport_5

If not a pair I could make do with just 1! Thanks!

Looking at the replies below, the ones i have are 69-72, sorry.

**nitrosport_5** · 02-06-2023, 01:30 PM

Quote:

Originally Posted by Jeff's bowtie's

I think what he is looking for is the metal bucket that the sealed beam light is mounted in and the stainless trim ring that holds it in place with the 3 screws. I think what you are referring to is the outer headlight bezel they were steel or aluminum. Hope this helps

this is exactly what I need!

02-05-2023, 06:41 PM	#1
nitrosport_5 Registered User Join Date: Jul 2012 Location: St. John, Washington Posts: 618	Wtb: 68 chevy headlight bucket and trim ring Need a pair of headlight buckets and the trim ring thst holds the light in. Not sure where mine ran off to! Screws with the trim ring would be appreciated too! Thanks __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project

02-05-2023, 10:31 PM	#2
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 622	Re: Wtb: 68 chevy headlight bucket and trim ring Are you looking for steel or aluminum?

02-06-2023, 10:11 AM	#5
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 508	Re: Wtb: 68 chevy headlight bucket and trim ring I might have a pair.

02-06-2023, 03:40 PM	#7
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Wtb: 68 chevy headlight bucket and trim ring I've got a few sets ,I'll post up pictures shortly . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.