292 in 1966 K10 4X4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**AlaskaK10** · 07-03-2023, 07:08 AM

Hi
I'm looking for the parts needed to mount a 292 in my 1966 K10. I understand it takes a special offset cross member . If anyone has the parts needed let me know
Thanks

**60-66** · 07-03-2023, 10:26 AM

You need the right hand , or passenger side frame mount only . No crossmember

Lokin4AReason · 07-03-2023, 11:23 AM

Like he said ^ ^ ^ ^ ^

Its the only thing different from the rest of the inline 6s

Motor mount location(s) are different on the passenger side for the 292 than on the 250 and 230 ( which are the same )

**AlaskaK10** · 07-03-2023, 12:16 PM

Thanks for the reply

Thats for a 4X4 correct

Short 3/4 · 07-03-2023, 12:42 PM

Quote:

Originally Posted by AlaskaK10

Thanks for the reply

Thats for a 4X4 correct

Yes, you are correct. The holes for it should already be in the frame. Unfortunately the 292 perch is unique, you can’t just find the ‘everything else’ part and move it forward

Although it’s a fairly rare part, I and others have found it through the help of others on this forum. Good luck in your search
Tom

**AlaskaK10** · 07-03-2023, 03:49 PM

So what does it look like can you post a picture ?

Short 3/4 · 07-04-2023, 12:25 AM

Aerotruk63 posted a picture of what you are looking for on a stripped out 4x4 frame in the parts for sale section. Check it out.

**AlaskaK10** · 07-04-2023, 08:52 AM

Thanks for the picture

07-03-2023, 07:08 AM	#1
AlaskaK10 Junior Member Join Date: Mar 2023 Location: BREMERTON Washington Posts: 79	292 in 1966 K10 4X4 Hi I'm looking for the parts needed to mount a 292 in my 1966 K10. I understand it takes a special offset cross member . If anyone has the parts needed let me know Thanks

07-03-2023, 10:26 AM	#2
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: 292 in 1966 K10 4X4 You need the right hand , or passenger side frame mount only . No crossmember __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

07-03-2023, 11:23 AM	#3
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 972	Re: 292 in 1966 K10 4X4 Like he said ^ ^ ^ ^ ^ Its the only thing different from the rest of the inline 6s Motor mount location(s) are different on the passenger side for the 292 than on the 250 and 230 ( which are the same ) __________________ dont want to hear excuses, i want to hear solution(s)

07-03-2023, 12:16 PM	#4
AlaskaK10 Junior Member Join Date: Mar 2023 Location: BREMERTON Washington Posts: 79	Re: 292 in 1966 K10 4X4 Thanks for the reply Thats for a 4X4 correct Attached Images

07-03-2023, 03:49 PM	#6
AlaskaK10 Junior Member Join Date: Mar 2023 Location: BREMERTON Washington Posts: 79	Re: 292 in 1966 K10 4X4 So what does it look like can you post a picture ?

07-04-2023, 12:25 AM	#7
Short 3/4 Registered User Join Date: Jan 2017 Location: Los Osos Ca Posts: 560	Re: 292 in 1966 K10 4X4 Aerotruk63 posted a picture of what you are looking for on a stripped out 4x4 frame in the parts for sale section. Check it out. __________________ 65 short stepside K10 292-SM420-T221 8 lug closed D44 front NoSpin HO72 4.10 rear

07-04-2023, 08:52 AM	#8
AlaskaK10 Junior Member Join Date: Mar 2023 Location: BREMERTON Washington Posts: 79	Re: 292 in 1966 K10 4X4 Thanks for the picture



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.