GMC Pauls Front Fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**hevy_chevy67** · 10-17-2023, 03:41 PM

Was wondering if anyone has used these fenders from GMC Pauls? They are advertised as being made from a new tooling and fixture jig in 2022. Just wondering if anyone has bought them and if the fit is as good as advertised?

https://gmcpauls.com/Body&Bumpers.htm

Joyridin · 10-21-2023, 11:53 AM

Does anybody know the brand GMCPaul's sell? They look like nice fenders, but their shipping is a bit too much..

**chevmn** · 10-21-2023, 01:52 PM

Quote:

Originally Posted by Joyridin

Does anybody know the brand GMCPaul's sell? They look like nice fenders, but their shipping is a bit too much..

I actually spoke with someone there regarding shipping cost once on a seat cover, and they indicated they do not get as good of a rate as other vendors, and would not negotiate, so I had to go elsewhere. I do not mind paying a little more, especially if quality is better, but when item is the same shipping is usually a deal breaker. And their website leaves something to be desired, or is it just me??

**NGN** · 10-21-2023, 03:08 PM

Would the cost for shipping be per fender or per order? Like if I buy two fenders would the shipping double?

**LockDoc** · 10-21-2023, 07:28 PM

Quote:

Originally Posted by NGN

Would the cost for shipping be per fender or per order? Like if I buy two fenders would the shipping double?

Shipping is getting more location based so I would just call the vendors and ask. I think some of the postage is going up the end of January next year so if you are thinking about buying any big ticket items I would think about doing it before then.

LockDoc

Joyridin · 10-22-2023, 11:51 AM

Quote:

Originally Posted by NGN

Would the cost for shipping be per fender or per order? Like if I buy two fenders would the shipping double?

In most cases, it goes by the dollar amount spent, but the fenders are shipped via freight, so that might be per fender.

National Parts Depot is also claiming their fenders have new dies etc. They are a bit more per fender, but I can drive and pick them up. Getting any info out of them is like pulling teeth though as far as metal thickness.

**chevmn** · 10-22-2023, 07:51 PM

Not trying to get too far off topic, but shipping is often a negotiated rate with a carrier. The company I retired from had a VERY good rate with FedEx and they shipped pretty much exclusively with them, and they provided software, scales, etc. Once I shipped a tilt column boxed in a wooden box (heavy and long) using their account (reimbursed them), and it was only a little over $7.00 to ship. I also sent an overnight small packet to Nevada from MO, and no charge on that believe it or not) That sort of explains why individuals pay high prices, while large companies might get extremely good rates. My guess is some of the large companies may actually be making money on shipping if they do enough with one carrier.

10-17-2023, 03:41 PM	#1
hevy_chevy67 Registered User Join Date: May 2005 Location: Blackfalds, Alberta Posts: 604	GMC Pauls Front Fenders Was wondering if anyone has used these fenders from GMC Pauls? They are advertised as being made from a new tooling and fixture jig in 2022. Just wondering if anyone has bought them and if the fit is as good as advertised? https://gmcpauls.com/Body&Bumpers.htm __________________ 1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e

10-21-2023, 11:53 AM	#2
Joyridin Registered User Join Date: Sep 2020 Location: Cleveland, Ohio Posts: 558	Re: GMC Pauls Front Fenders Does anybody know the brand GMCPaul's sell? They look like nice fenders, but their shipping is a bit too much..

10-21-2023, 03:08 PM	#4
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 838	Re: GMC Pauls Front Fenders Would the cost for shipping be per fender or per order? Like if I buy two fenders would the shipping double?

10-22-2023, 07:51 PM	#7
chevmn Senior Member Join Date: Dec 2017 Location: Central MO Posts: 900	Re: GMC Pauls Front Fenders Not trying to get too far off topic, but shipping is often a negotiated rate with a carrier. The company I retired from had a VERY good rate with FedEx and they shipped pretty much exclusively with them, and they provided software, scales, etc. Once I shipped a tilt column boxed in a wooden box (heavy and long) using their account (reimbursed them), and it was only a little over $7.00 to ship. I also sent an overnight small packet to Nevada from MO, and no charge on that believe it or not) That sort of explains why individuals pay high prices, while large companies might get extremely good rates. My guess is some of the large companies may actually be making money on shipping if they do enough with one carrier.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.