Center caps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CarlsLQ9SS** · 02-02-2024, 06:40 PM

What center caps do I have? I just bought them and look to be NOS but not sure.

lil hoodlum · 02-03-2024, 03:56 AM

Just an edjucated guess, I would say those are 1967 - 1968 caps with out the paint. They also look like they might be for a C20, guessing by how deep they look on my computer screen. What is the overall diameter?

**CarlsLQ9SS** · 02-03-2024, 06:00 AM

10 3/4” outside to outside, 10 1/4” inside to inside and 2 5/8” deep

**special-K** · 02-03-2024, 08:45 AM

What you have are hubcaps. Center caps are what are used on styled wheels. Lil hoodlum is correct. These are 67-68 C/10 hubcaps. The hubcaps for 20/30 series look from the from identical to the 10 series, same diameter. But those are different on the back due to having an inner ring used to accept the clips on the wheels for mounting

**1970cstblazer** · 02-03-2024, 08:53 AM

Those are 1974-1990 Chevy car poverty caps, mostly used on police package Bel Airs, Impalas and Caprices..

**CarlsLQ9SS** · 02-03-2024, 12:15 PM

Thanks everyone for your replies and knowledge. I agree with 1970cstblazer, they are identical to the pictures you posted. I was thinking they was 67-68 hubcaps but my question is will they work on 68 Chevy truck wheel?

**1970cstblazer** · 02-03-2024, 12:41 PM

I don't think those will work. They require the stamped nubs on the wheel to attach.

**cwcarpenter98** · 02-04-2024, 11:16 PM

Quote:

Originally Posted by CarlsLQ9SS

I was thinking they was 67-68 hubcaps but my question is will they work on 68 Chevy truck wheel?

IF you have the stock nub style wheels, then yes, these will fit

**special-K** · 02-05-2024, 07:40 AM

These will work on 5 and 6 lug truck wheels the same as they work on car 5 on 4 3/4" wheels. The same is true for all Chevy car hubcaps that mount by nubs, which began in the early 50s.

'54 car caps on 5-lug truck wheels

SCOTI · 02-05-2024, 12:43 PM

Most passenger car & 1/2 ton truck caps are 10 1/4 ID & fit on both wheel pattern wheels (5x4.75" & 5x5").

Later 3/4 ton trucks utilize the larger 12" ID caps.

Early smaller trucks (chevy Luv) used a 9" cap.

**special-K** · 02-06-2024, 09:50 AM

Quote:

Originally Posted by SCOTI

Most passenger car & 1/2 ton truck caps are 10 1/4 ID & fit on both wheel pattern wheels (5x4.75" & 5x5").

Later 3/4 ton trucks utilize the larger 12" ID caps.

Early smaller trucks (chevy Luv) used a 9" cap.

yep, that's the gospel there. The 9" are what you'd find on the 4-luggers like Corvair and Chevy II. On my trailer, which has 5 x 4 1/2" lug pattern, I have Mopar (which used the 9" caps) 15" wheels with LUV hubcaps

**michael bustamante** · 02-06-2024, 06:04 PM

i was told theyre s-10 caps square body style

SCOTI · 02-06-2024, 08:35 PM

Quote:

Originally Posted by michael bustamante

i was told theyre s-10 caps square body style

Nope.
S10's & Sonoma's had their own specific caps. The ones posted initially were full-size B-body Impala/Caprice caps.

**CarlsLQ9SS** · 02-06-2024, 10:46 PM

I tried these on a rough old truck wheel. This wheel is a Chevy 5 on 5 and they fit perfect, thanks everyone for the replies.

02-02-2024, 06:40 PM	#1
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,162	Center caps What center caps do I have? I just bought them and look to be NOS but not sure. Attached Images __________________ Carl 1971 GMC short bed, (Henry) Options I've added, tilt, ac, 8k tach, Electric speedometer conversion for LS swap, 6.0 with 823 heads and BTR stage 4 truck cam, 4L80e, posi with 3.73 rear end, Power steering and power brakes Lowered 5/7. Frame up build.

02-03-2024, 03:56 AM	#2
lil hoodlum Registered User Join Date: Oct 2009 Location: Denton, Texas Posts: 1,735	Re: Center caps Just an edjucated guess, I would say those are 1967 - 1968 caps with out the paint. They also look like they might be for a C20, guessing by how deep they look on my computer screen. What is the overall diameter? __________________ 1968 C10 327, 3 speed manual, LWB stock height daily driver. 1968 C20 327, 4 speed manual, LWB stock height custom camper with heavy duty leaf springs rear, 50th anniversary edition. Hoping to press into daily drive status soon.

02-03-2024, 06:00 AM	#3
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,162	Re: Center caps 10 3/4” outside to outside, 10 1/4” inside to inside and 2 5/8” deep __________________ Carl 1971 GMC short bed, (Henry) Options I've added, tilt, ac, 8k tach, Electric speedometer conversion for LS swap, 6.0 with 823 heads and BTR stage 4 truck cam, 4L80e, posi with 3.73 rear end, Power steering and power brakes Lowered 5/7. Frame up build. Last edited by CarlsLQ9SS; 02-03-2024 at 06:18 AM.

02-03-2024, 08:45 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Center caps What you have are hubcaps. Center caps are what are used on styled wheels. Lil hoodlum is correct. These are 67-68 C/10 hubcaps. The hubcaps for 20/30 series look from the from identical to the 10 series, same diameter. But those are different on the back due to having an inner ring used to accept the clips on the wheels for mounting __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-03-2024, 08:53 AM	#5
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,826	Re: Center caps Those are 1974-1990 Chevy car poverty caps, mostly used on police package Bel Airs, Impalas and Caprices.. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

02-03-2024, 12:15 PM	#6
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,162	Re: Center caps Thanks everyone for your replies and knowledge. I agree with 1970cstblazer, they are identical to the pictures you posted. I was thinking they was 67-68 hubcaps but my question is will they work on 68 Chevy truck wheel? __________________ Carl 1971 GMC short bed, (Henry) Options I've added, tilt, ac, 8k tach, Electric speedometer conversion for LS swap, 6.0 with 823 heads and BTR stage 4 truck cam, 4L80e, posi with 3.73 rear end, Power steering and power brakes Lowered 5/7. Frame up build.

02-03-2024, 12:41 PM	#7
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,826	Re: Center caps I don't think those will work. They require the stamped nubs on the wheel to attach. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

02-05-2024, 07:40 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Center caps These will work on 5 and 6 lug truck wheels the same as they work on car 5 on 4 3/4" wheels. The same is true for all Chevy car hubcaps that mount by nubs, which began in the early 50s. '54 car caps on 5-lug truck wheels Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-05-2024, 12:43 PM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: Center caps Most passenger car & 1/2 ton truck caps are 10 1/4 ID & fit on both wheel pattern wheels (5x4.75" & 5x5"). Later 3/4 ton trucks utilize the larger 12" ID caps. Early smaller trucks (chevy Luv) used a 9" cap. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-06-2024, 06:04 PM	#12
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Center caps i was told theyre s-10 caps square body style __________________ 1967custom

02-06-2024, 10:46 PM	#14
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,162	Re: Center caps I tried these on a rough old truck wheel. This wheel is a Chevy 5 on 5 and they fit perfect, thanks everyone for the replies. Attached Images __________________ Carl 1971 GMC short bed, (Henry) Options I've added, tilt, ac, 8k tach, Electric speedometer conversion for LS swap, 6.0 with 823 heads and BTR stage 4 truck cam, 4L80e, posi with 3.73 rear end, Power steering and power brakes Lowered 5/7. Frame up build.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.