TX WTB - 1966 non-oil bath air cleaner for GMC 305 v6

[AngryPirate]

'll be doing the typical Holley 500 2 BBL carb conversion for the GMC 305 v6 and would like an OE type air cleaner assembly.

Apologies for the double post.

[Ironhorse]

Have a GM 2 BBL air breather that has been modified at the air horn if your interested in it. Looks as if a previous owner tried to increase the air flow maybe? Not sure the reason for the mod but the air breather does use a disposable air filter. Can dig thru the parts stash and get some pics if interested, let me know.

[AngryPirate]

Originally Posted by Ironhorse

Have a GM 2 BBL air breather that has been modified at the air horn if your interested in it. Looks as if a previous owner tried to increase the air flow maybe? Not sure the reason for the mod but the air breather does use a disposable air filter. Can dig thru the parts stash and get some pics if interested, let me know.

Thanks for the response Ironhorse.

If you happen to be in the area of said parts, sure, I'd have a look.

thank you sir.

[Ironhorse]

Found the 2BBL air breather and took a few pics of it. As mentioned, it looks like at some point in it's past someone modified the air horn to increase air flow maybe, not sure on that. Guessing maybe 5-6 inches were removed? Still has remnants of a 327 engine sticker on the lid. Rubber gasket is complete and intact. Other than the shortened air horn it's very solid, no rust or dents, with just normal use scuffs. Still has the valve cover breather tube filter mounted with the clip. If interested would take $15 plus shipping for the breather.

[AngryPirate]

Originally Posted by Ironhorse

Found the 2BBL air breather and took a few pics of it. As mentioned, it looks like at some point in it's past someone modified the air horn to increase air flow maybe, not sure on that. Guessing maybe 5-6 inches were removed? Still has remnants of a 327 engine sticker on the lid. Rubber gasket is complete and intact. Other than the shortened air horn it's very solid, no rust or dents, with just normal use scuffs. Still has the valve cover breather tube filter mounted with the clip. If interested would take $15 plus shipping for the breather.

This may work. I'll send you a DM.

Thanks!

[Ironhorse]

Originally Posted by AngryPirate

This may work. I'll send you a DM.

Thanks!

Scott, got your PM and sending you a reply. Thanks.