which headers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roadking · 01-19-2004, 12:12 PM

gm 350 250hp crate motor, i have a pair of the hooker shorty block huggers but been told the create alot more heat to motor. is anyone else using these headers? any unexpensive recommedation for a 1971?

djracer · 01-19-2004, 12:41 PM

I bought hedman headers and they fit pretty good and were cheap like 140 I think. My exhaust man says you will never keep any kind of collector gasket on a shorty header. He says the engine torque put allot of stress where the collector is!

stepside454 · 01-19-2004, 01:07 PM

have shorty headers on my truck from Sanderson. I love em. Never heard the collector gasket theory on shortys before. But not to worry, Mine dont have any gaskets at all

rn2fine · 01-19-2004, 01:16 PM

If inexpensive is what you are looking for try headers by Flowtech (division of Holley). Available at local parts stores like Checker (CSK Auto) for under a hundred bucks. I think I paid 80 or 90 for a pair. If you are worried about your shorty headers heating up the block you may want to consider wrapping them. It reduces heat under the hood significantly (the wrap manufacturers claim a 70% reduction).

kaycee · 01-19-2004, 02:04 PM

I put these on my truck about 3yrs ago cost me $100. and have not had a problem since.I have put 1 set of collector gasket's in durring this time.I allso run a heatshield on the starter

01-19-2004, 12:12 PM	#1
roadking Registered User Join Date: Nov 2003 Location: kc Posts: 229	which headers? gm 350 250hp crate motor, i have a pair of the hooker shorty block huggers but been told the create alot more heat to motor. is anyone else using these headers? any unexpensive recommedation for a 1971?

01-19-2004, 12:41 PM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	I bought hedman headers and they fit pretty good and were cheap like 140 I think. My exhaust man says you will never keep any kind of collector gasket on a shorty header. He says the engine torque put allot of stress where the collector is! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-19-2004, 01:07 PM	#3
stepside454 Registered User Join Date: Nov 2003 Location: st. louis area Posts: 1,551	have shorty headers on my truck from Sanderson. I love em. Never heard the collector gasket theory on shortys before. But not to worry, Mine dont have any gaskets at all __________________ 75 GMC C-15 short/step factory 454, lowered

01-19-2004, 01:16 PM	#4
rn2fine Registered User Join Date: Jan 2004 Location: Arizona Posts: 157	Inexpensive Headers If inexpensive is what you are looking for try headers by Flowtech (division of Holley). Available at local parts stores like Checker (CSK Auto) for under a hundred bucks. I think I paid 80 or 90 for a pair. If you are worried about your shorty headers heating up the block you may want to consider wrapping them. It reduces heat under the hood significantly (the wrap manufacturers claim a 70% reduction).

01-19-2004, 02:04 PM	#5
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,449	Hedmans I put these on my truck about 3yrs ago cost me $100. and have not had a problem since.I have put 1 set of collector gasket's in durring this time.I allso run a heatshield on the starter __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.