|
|
|
01-21-2004, 01:22 AM
|
#1 |
|
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Need lockout screws
Hi everyone
I have a 71 1/2 ton 4x4. I need some screws for my lockouts. I have Warn lockouts with the hex head screws. I need to get 2 more screws - would like 4 if possible so I can have 2 extras. One was gone when I went to work on them and the other had a stripped head. Anyone have a couple I could have for cheap? They are about 3/4" long from tip to tip. Any help would be great. If I can't find them here I will probably just hit the junkyard. Shawn
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
|
|
|
01-21-2004, 01:22 AM
|
#2 |
|
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Picture of the screws.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
|
|
|
|
01-21-2004, 02:38 AM
|
#3 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,628
|
You should be able to pick those up at your local hardware store for about 5 cents each-- should save some time and gas
|
|
|
|
|
01-21-2004, 09:33 AM
|
#4 |
|
Pennyless Fool
Join Date: Oct 2003
Location: Forney,Tx
Posts: 439
|
Socket head cap screws. You know, sometimes Lowes has those in thier specialty hardware section. If not, try the phone book, I get them at a local bolt and screw supply house. Also try the mom and pop hardware stores, they seem to carry better assortments of stuff like that around here than the larger stores.
__________________
"Who owns this car with the peace sign, the mag wheels, and four on the floor?" 67 Short Step 283/TH400/4.11 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
