![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
hmm...
Join Date: Jan 2004
Location: Culver, Indiana
Posts: 1,631
|
Newbie with a few questions
Ok, I'm looking at buying a 68 C-10. This thing is totally base model, white trim, 3 on the tree tranny, 250 six with a 1 BBL carb, 2WD, and a wood bed. Alright, this is going to be my daily driver for a year or so, but then I'd like to pull it in and give it a total restoration, including the wimpy 250.
My questions are - 1. Is there any place to get a full doghouse for this truck? I'm leaving the gas tank where it is, though I've heard that a popular thing to do is to put it under the bed. It's got a decent sized hole behind the seat, and the rockers and rear lower corners of the cab is gone. If it was just the rockers and corners, I'd patch it, but I don't know the condition of the floor, and I don't want to half-ass this job. 2. Is there a diagram for putting a new bed in it? I've got oak wood for it, but the trim (the brass between the wood slats) is really beat up, and the bed is rotted very bad (half of it is gone). I'm pretty good with woodworking and I have all the tools that I'd need, but I don't know how to make the joints between the wood. 3. For daily driving, I'd like to put a 4BBL carb and header on the motor and keep the original equipment for when (if) if I sell it. Is there anyone that still makes this stuff? 4. Can you get repro parts for the dash? 5. Are there any bench seats that will interchange with it? I'm not too sure on the condition of the whole thing, and if it isn't too bad, I'll just get it reupholstered, but if it is, this is kinda a rare truck around here. 6. Maaaybe, eventually I'll put in a 350 (I'd rather not, everything has one) or a 400, or maybe I'll be different and put in a 403 Olds. I'd like to keep the 3 on the tree shifting, but how strong is this transmission? I'm sorry that I can't provide any numbers, but the truck is 2 hours away from me and I don't have anyone to go check on it for me. umm...I think that's it, but I'm sure that if I get it, I'll be a more regular member here because there's a lot that I haven't the faintest idea about with these things. I'm an Oldsmobile guy, but I'd like a truck and this thing is reeaaaly cheap (think under $400 bucks) and running, and I like these Chevy trucks, so that's that.
__________________
1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR. |
![]() |
![]() |
![]() |
#2 |
Howzit?!?
Join Date: Jan 2003
Location: Maryville, TN
Posts: 1,266
|
Aloha from Tennessee! Don't have any answers... but I know you will get them here
![]() One thing you should try is the 'search' function... it's a great resource for past posts. J
__________________
Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold |
![]() |
![]() |
![]() |
#3 |
hmm...
Join Date: Jan 2004
Location: Culver, Indiana
Posts: 1,631
|
Thanks and aloha to you too! I'm nuts, I've decided, I've already started making a notebook about this truck, I've got 2 80 page notebooks full on my oldsmobile, I can just imagine what's going to happen with this one lol!
__________________
1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR. |
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
welcome....
1 make a post on the parts board 2 i got a chassie manual....18.00 shipped 3 don't sell it ![]() 4 yes 5 yes many options 6 don't do that ![]() |
![]() |
![]() |
![]() |
#5 |
Mike
Join Date: Jan 2003
Location: west chester pa
Posts: 2,474
|
Check the parts board,Quite often there are guys selling.#2 GMCpauls has a bed diagram on there website.#4yes all the vendors on the board has repro parts for the dash.#5 do a search on this board.A lot of guys have pics of different seats in there cabs.Late eights early ninties fit.#6 How about a caddy.check out board member Longhornman,he has info on his site for doing a caddy swap.Welcome to the board!
__________________
70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires |
![]() |
![]() |
![]() |
#6 |
Mike
Join Date: Jan 2003
Location: west chester pa
Posts: 2,474
|
Just saw you are from indy. www.gmcpauls.com is in Indy somewhere.
__________________
70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires |
![]() |
![]() |
![]() |
#7 |
Born To Lose Club
![]() Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,306
|
Welcome To The Board From The Great White North!!!
__________________
Brian Smith ![]() 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Sep 2003
Location: Waterloo, IA
Posts: 1,147
|
Welcome to the board from Minnesota!
All of your answers (and then some) can be found on this board. There is a lot of knowledge here. Good luck in your plans for the truck! Paul
__________________
'72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958 |
![]() |
![]() |
![]() |
#9 |
Account Suspended
Join Date: Jan 2003
Location: Shadow of Lambeau Field
Posts: 5,597
|
Welcome to the board from W. Tennessee. Your lucky to like in indy, there are many board members up your way, and the annual board members meet will be held there this year!
|
![]() |
![]() |
![]() |
#10 |
hmm...
Join Date: Jan 2004
Location: Culver, Indiana
Posts: 1,631
|
Thanks guys. Like I said, it's not mine yet, and I don't even know if it IS going to be mine. About the motor, I really like straight sixes (own 3 of them, an 83 AMC 258, 86 AMC 258 in our 83 CJ-7 and a 4.0L in a Cherokee) and I really like them all. The only reason that I said I might even possibly consider it is that a 120 HP six in a full size truck seems a bit anemic. Thanks to smokekiki for the link and info, and if I get the truck (and his permission, lol) I'm sure that I'll be dropping by paul's place a lot with a bunch of dumb newbie questions.
__________________
1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR. |
![]() |
![]() |
![]() |
#11 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,923
|
Welcome from south Mississippi. Lots of options to your questions.
On the engine. If your are looking at redoing the 250 and spending money on speed parts, you might find it cheaper right now going with a basic V8 Speed parts are much cheaper and rebuilding or getting a different engine (crate) is about same cost, if not cheaper and it'll bolt to your 3 speed. Seat Options are endless with these trucks. probably most common and easy is using one from a 88-98 full size GM truck. Parts options are very good...lots of vendors on the board and all are great to deal with and EXTREMELY helpful. Have fun!!
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#12 |
hmm...
Join Date: Jan 2004
Location: Culver, Indiana
Posts: 1,631
|
OK, the engine is in good shape, no knocks or rattles or burning anything, and the oil pressure doesn't go below 20 PSI (can't say that about my 307! lol!), so, besides a tune up and a starter and battery, it'll be fine. I read though that it only puts out 120 HP. The Delta is a dog with 30 more HP than that, and this is a fullsize truck that will probably be doing some work (wood loads, possibly hunting expeditions, pulling a boat around the property, etc) at least until I get it all restored and ready to go. This is why I want to just add a 4BBL carb and header, it'll increase HP and torque a bit, and is very reversible. On one of the Oldsmobile forums I'm on, a guy that posts there used to own UltraDyne cams and now makes custom grinds for Lunati, so I might go with that as well. Aside from that, I want it to stay stock. The seat probably just needs reupholstered, but I'm just making sure that there are different options out there for it. Thanks guys!
__________________
1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR. |
![]() |
![]() |
![]() |
#13 |
hmm...
Join Date: Jan 2004
Location: Culver, Indiana
Posts: 1,631
|
Correction: I just talked to my dad, and it's a 67. Cool.
__________________
1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR. |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jan 2001
Location: Killingworth, CT. USA
Posts: 3,378
|
![]()
Welcome from Connecticut! Drive it the way it is with the stock six and save up some $ for the V-8 swap.
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist. |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jan 2003
Location: Washington State
Posts: 8,834
|
Welcome from SW Washington State.....
__________________
1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo |
![]() |
![]() |
![]() |
Bookmarks |
|
|