|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
02-01-2004, 01:52 PM
|
#1 |
|
fuel
 Join Date: Jul 2003
Location: belton mo
Posts: 371
|
does anyone make bolt in bag cups??
well i got all my front suspension done and i put the wheels back on and remembering its still just a frame and i still have an engine and sheetmetal to go on. i measured the height, the crossmember sits 4 3/4 inches from the ground. so im gonna bag the front, im looking at innovative air suspension front cups, are they weld in or bolt in. i really dont want to weld in anything and ruin my nice painted finish. any advice???
thanks again yall chris |
|
|
|
02-01-2004, 03:01 PM
|
#2 |
|
Shortbox wanna-be.
Join Date: Mar 2002
Location: Fort St.John, British Columbia, Canada
Posts: 773
|
Just give them a call. They are pretty helpful. Their website doesn't show a picture though. They really need to do some updating on it.
__________________
1970 Chevy C20 Custom Camper 402BB Turbo 400 trans. (Slowly becoming a '70 shortbox 1/2 ton) '71 Camaro SS 402/T400 resto '97 Z28 (11.41@127MPH) 
|
|
|
|
|
02-01-2004, 04:58 PM
|
#3 |
|
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,793
|
here is a link I have a set on ebay!! http://67-72chevytrucks.com/vboard/s...threadid=88226
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
|
|
|
|
02-01-2004, 06:19 PM
|
#4 |
|
Registered User
Join Date: Jun 2002
Location: Tri Valley California
Posts: 792
|
You can run top plate too. You could make it yourself, and bolt it in. Also you never want to weld in upper cups! how would you ever get the bag out? I have installed bags on more then 20 cars and never welded in cups.
|
|
|
|
|
02-01-2004, 06:22 PM
|
#5 |
|
fuel
Join Date: Jul 2003
Location: belton mo
Posts: 371
|
ok i ordered some brackets and some bags for the rear from kpkomponents, now i just need to know what all i need other than bags and brackets,
i have a compressor could anyone give me a list of what valves, how much line, etc that i need, please, its so fricken cold out and im stir crazy need to buy something. thanks again chris |
|
|
|
|
02-03-2004, 01:31 AM
|
#6 |
|
Back from the Dead
Join Date: Dec 2001
Location: Salem, Oregon
Posts: 522
|
SMC makes a good 3/8 valve that usually run $35 a piece. You can run either 4 or 8, depending if you want F/B or F/B/S/S.
How much line you need depends on where and how you mount your tank, compressor, valves and bags. So its more of a buy as you go, I'd get 25ft and go from there. Remember you need a Supply Tank, Pressure Switch, Switches as well. It's fun once you get it done, I love my Airbags, even though it took a while to get it just the wy I wanted it. have fun..wish I had extra money to spend like that  Kenny
__________________
The only Carb that matters to me is the one under my hood! Salem, Oregon |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
