will 78 c10 parts work on my 68 gmc? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68jimmy · 02-13-2004, 02:23 AM

Will the suspension stuff from a 78 c10 1/2 bolt up to my 68 gmc 3/4 ton?

thanks!

Longhorn Man · 02-13-2004, 09:17 AM

If you were to pull the engine, and swap the entire front cross member over, then the front end would go in. You'd end up hogging out a hole or two.
As for the rear, you'd have to do some spring perch modifications since they are not in the right location, then you'd also have to move the shock mounts.

68jimmy · 02-13-2004, 08:57 PM

thanks good to know...

02-13-2004, 02:23 AM	#1
68jimmy Registered User Join Date: Dec 2003 Location: albuquerque Posts: 431	will 78 c10 parts work on my 68 gmc? Will the suspension stuff from a 78 c10 1/2 bolt up to my 68 gmc 3/4 ton? thanks!

02-13-2004, 09:17 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	If you were to pull the engine, and swap the entire front cross member over, then the front end would go in. You'd end up hogging out a hole or two. As for the rear, you'd have to do some spring perch modifications since they are not in the right location, then you'd also have to move the shock mounts.

02-13-2004, 08:57 PM	#3
68jimmy Registered User Join Date: Dec 2003 Location: albuquerque Posts: 431	thanks good to know...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.