Junk Yard Score - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PR454SS · 02-13-2004, 03:47 PM

Look what I got for Valentines Day!
Can't beat it for 10 bucks

I don't know why I needed the GMC horn button I don't even have the original steering wheel

PR454SS · 02-13-2004, 03:51 PM

Some other pics, this was in a 67 C20 I'd never seen a rear like this what is it?

PR454SS · 02-13-2004, 03:53 PM

3 This one still had the disc brakes

PR454SS · 02-13-2004, 03:55 PM

4

PR454SS · 02-13-2004, 03:56 PM

5 Still had motor and tranny

PR454SS · 02-13-2004, 03:59 PM

6 Please tell me the plates on this frame aren't factory, whats with the braces in the lower left corner, should my truck have those?

70ChevyLongbed · 02-13-2004, 04:02 PM

Good score! ...and I'm at work all day ::dang:: I need to be followin' Paul to the good spots!

PR454SS · 02-13-2004, 04:02 PM

7 Another of the same frame.

PR454SS · 02-13-2004, 04:05 PM

8 I had a moment of silence for this one.

PR454SS · 02-13-2004, 04:07 PM

9 I think we know who's this was... I got the munchies just opening the door!!!

**CPNE** · 02-13-2004, 04:08 PM

Quote:

Originally posted by PR454SS
6 Please tell me the plates on this frame aren't factory, whats with the braces in the lower left corner, should my truck have those?

Those are normally only on 3/4 ton 2wd trucks. That plated frame is definately not stock.

PR454SS · 02-13-2004, 04:09 PM

Last one, just further proof that everone loves a Chevy Truck!

PR454SS · 02-13-2004, 04:12 PM

Quote:

Originally posted by CPNE

Those are normally only on 3/4 ton 2wd trucks. That plated frame is definately not stock.

I was wondering It is a real long frame and has two seperate crossmembers for the driveshaft to pass through.

**CPNE** · 02-13-2004, 04:17 PM

Somebody stretched it, and it's not a 1 ton frame because it has trailing arms. The braces are stock 3/4 ton parts but the extra xmember and plating are not.

PR454SS · 02-13-2004, 04:22 PM

Looks like a good frame for an extended cab like I've always wanted

Longhorn Man · 02-13-2004, 04:30 PM

That rear is the HO52 corp/Eaton rear end. Normal stuff for 3/4 ton trucks.

PR454SS · 02-13-2004, 04:36 PM

Oh, I was looking for a good axle since therye are cheap, I thought about that one or there is a 14 bolt there also, just have to weld on new spring perches.

Blue Beard · 02-13-2004, 06:31 PM

Now that's the kind of yard I'd like to see around here....

Most of the truck yards are gone.......

02-13-2004, 03:47 PM	#1
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Junk Yard Score Look what I got for Valentines Day! Can't beat it for 10 bucks I don't know why I needed the GMC horn button I don't even have the original steering wheel Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-13-2004, 03:51 PM	#2
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Some other pics, this was in a 67 C20 I'd never seen a rear like this what is it? Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-13-2004, 03:53 PM	#3
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	3 This one still had the disc brakes Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-13-2004, 03:55 PM	#4
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	4 Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-13-2004, 03:56 PM	#5
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	5 Still had motor and tranny Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-13-2004, 03:59 PM	#6
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	6 Please tell me the plates on this frame aren't factory, whats with the braces in the lower left corner, should my truck have those? Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs Last edited by PR454SS; 02-13-2004 at 04:03 PM.

02-13-2004, 04:02 PM	#7
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,265	Good score! ...and I'm at work all day ::dang:: I need to be followin' Paul to the good spots! __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

02-13-2004, 04:02 PM	#8
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	7 Another of the same frame. Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-13-2004, 04:05 PM	#9
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	8 I had a moment of silence for this one. Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-13-2004, 04:07 PM	#10
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	9 I think we know who's this was... I got the munchies just opening the door!!! Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-13-2004, 04:09 PM	#12
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Last one, just further proof that everone loves a Chevy Truck! Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-13-2004, 04:17 PM	#14
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Somebody stretched it, and it's not a 1 ton frame because it has trailing arms. The braces are stock 3/4 ton parts but the extra xmember and plating are not. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

02-13-2004, 04:22 PM	#15
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Looks like a good frame for an extended cab like I've always wanted __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-13-2004, 04:30 PM	#16
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	That rear is the HO52 corp/Eaton rear end. Normal stuff for 3/4 ton trucks.

02-13-2004, 04:36 PM	#17
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Oh, I was looking for a good axle since therye are cheap, I thought about that one or there is a 14 bolt there also, just have to weld on new spring perches. __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs



Register or Log In To remove these advertisements.

02-13-2004, 06:31 PM	#18
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Now that's the kind of yard I'd like to see around here.... Most of the truck yards are gone....... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

Register or Log In To remove these advertisements.