|
|
|
02-25-2004, 02:18 AM
|
#1 |
|
Hammer On!
 
Join Date: Jul 2001
Location: Olathe, KS
Posts: 473
|
Wood Bed Restoration
Hey all, i just thought i'd post some pics of my "current" restoration. The factory wood bed is getting its long overdue turn. I haven't said anything about this, so heres the story. For my selection of wood i chose white oak. I bought i think it was 8 boards and with a little help from my uncle, got the wood planed, grooves cut and sanded down to a smooth finish. I also decided not to stain the wood. I like the natural look of it. However, the urethane im using did tint it a little bit. I am using System Three's Marine Grade Urethane. I put on 1 coat on the underside and 3 for the topside. For the rest of the underside and inner walls and wheel wells im using Herculiner (great stuff but tricky to work with). My project has come to a hault till next week since my uncle has left for skiing so im getting anxious to finish it up. Anyway here are a few pics of the wood. Im sure there will be plenty more to follow!
Aaron  Here is a board just to show the beauty:
__________________
1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed |
|
|
|
02-25-2004, 02:19 AM
|
#2 |
|
Hammer On!
Join Date: Jul 2001
Location: Olathe, KS
Posts: 473
|
flipside with herculiner added on:
__________________
1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed |
|
|
|
|
02-25-2004, 02:20 AM
|
#3 |
|
Hammer On!
Join Date: Jul 2001
Location: Olathe, KS
Posts: 473
|
the entire stack ready for assembly
__________________
1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed |
|
|
|
|
02-25-2004, 02:20 AM
|
#4 |
|
Hammer On!
Join Date: Jul 2001
Location: Olathe, KS
Posts: 473
|
just a close up:
__________________
1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed |
|
|
|
|
02-25-2004, 02:22 AM
|
#5 |
|
Hammer On!
Join Date: Jul 2001
Location: Olathe, KS
Posts: 473
|
and the front piece: Id like to thank GMCPaul's for the help with the wood dimensions on his website and for selling me this piece which arrived in perfect condition, its going to get herculiner on both sides since the one side will always face the cab anyway:
__________________
1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed |
|
|
|
|
02-25-2004, 02:57 AM
|
#6 |
|
Embrace the Redneck
Join Date: Jan 2004
Location: Cabot, AR
Posts: 1,334
|
how much was that front piece? got a link?
__________________
'01 Camaro Son, you just can't get there from here... |
|
|
|
|
02-25-2004, 04:01 AM
|
#7 |
|
Senior Member
 Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,721
|
Looks as though all that bubble wrap & cardboard I used in packaging it worked well protecting it, always happy to see our sheetmetal arrive undamaged glad we could help.
Woods looking good!!!! You can always expect the polyurethanes and varnish to deepen the tint of the wood when you apply it, does wonders for making the grain in wood show. Be sure to send finished photos so we can add you to the web site " Truck Photos Page" http://www.gmcpauls.com/photos.htm GMCPaul |
|
|
|
|
02-25-2004, 12:39 PM
|
#8 |
|
Registered User
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,501
|
Sorry to but in on your post, but has anyone ever seen a bed with the wood stained a dark color? Like maybe the color of the stickers on the lower molding, or the door panel inserts on a '70? I've never seen it done, but was thinking of doing mine this color. Post some pics if you have them.
Your wood looks great, btw. Should last forever, too!
__________________
Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com |
|
|
|
|
02-25-2004, 03:42 PM
|
#9 |
|
Registered User
Join Date: Jul 2003
Location: Cypress, Tx
Posts: 4,005
|
HuggerCST,
I actually have the stain that matches the woodgrain and will be doing my bed soon. I will take pics and let you know how it turns out. Shawn
__________________
1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE |
|
|
|
|
02-25-2004, 03:52 PM
|
#10 |
|
Wiseass secured himself a BAN
Join Date: Nov 2000
Location: MOON!!!
Posts: 2,282
|
Better hope you never need to carry anything in the bed. Good Bye finish.
|
|
|
|
|
02-25-2004, 04:24 PM
|
#11 |
|
Registered User
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,501
|
jorgensensc- Yea, that would be great if you could send me some pics. What color is the stain?
67fleetsidedream- This will be more of a show truck, so I don't plan to haul anything in the bed.
__________________
Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com |
|
|
|
|
02-25-2004, 04:32 PM
|
#12 |
|
Registered User
Join Date: Jul 2003
Location: Cypress, Tx
Posts: 4,005
|
HuggerCST,
I think it was walnut, but I'll have to check and let you know. 67fleetsidedream, I use my truck alot, that is why I haven't done the bed yet, but I think if I use a bed mat when I haul things it will be O.K.
__________________
1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE |
|
|
|
|
02-25-2004, 04:34 PM
|
#13 |
|
Registered User
Join Date: Apr 2003
Location: NB
Posts: 3,367
|
Can't wait to see it done!
__________________
1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD |
|
|
|
|
02-26-2004, 07:45 AM
|
#14 |
|
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
Take more pics and post as you assemble the bed. Looks good.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
