A little body shop progress - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 03-01-2004, 01:59 PM

Here are a couple pics of the progress at the body shop. I'm supposed to stop by tonight and the body guy said a lot of work would be done on the cab by then. I'll cross my fingers.

Anyway, the passenger fender had a dent in the upper front corner and both fenders had some old repairs. I removed most of the filler and he has smoothed the fenders out nicely.

Dean · 03-01-2004, 02:05 PM

Looking good!!! You will be caught up to me before you know it.

**Yukon Jack** · 03-01-2004, 02:30 PM

I can only dream about being that far along!

dubie · 03-01-2004, 02:30 PM

lookin good!! Betcha can't wait to see some paint on that thing eh

**CPNE** · 03-01-2004, 02:42 PM

Where are your C/20 badges going? You're not deleting them are you?

I see you left the holes for the "454" badges though

**Yukon Jack** · 03-01-2004, 03:10 PM

Nope, the badges will go back, he just hasn't cleaned the holes out yet. And no, I'm not using 454 badges, those are the holes for the 4 Wheel Drive emblems. The 454 is gonna be incognito.

griesel72 · 03-01-2004, 03:55 PM

very nice, are you going to make your deadline? I'd like to see it done.

JDYUSA · 03-01-2004, 04:01 PM

Looks as though you are about ready for primer... coming a long fine.

**Yukon Jack** · 03-01-2004, 04:21 PM

The body guy says he will stick to the schedule, but I will be amazed if he can have it done as scheduled - just seems to be a lot that he has to still do.

Dean · 03-01-2004, 04:32 PM

I think you need to come to Ohio and get this Blazer I have so you can run disk brakes on yours....lol

Bram · 03-01-2004, 07:39 PM

I'm jealous. I don't know when I'll be able to get started on my body, I just hope sometime this year.

**Yukon Jack** · 03-03-2004, 01:35 PM

Well, a little more progress, but a loooonnnnnnggggg way to go at this rate.

**Yukon Jack** · 03-03-2004, 01:36 PM

Front clip is torn apart now too.

*67Fleetsidedream* · 03-03-2004, 01:52 PM

Lookin good. What kind of primer are they using. Regular or high production?

Dean · 03-03-2004, 02:08 PM

I sure hope you took a lot of pics and labeled everything before you took it apart...lol. I can't tell you how many times I forget how something goes back together. Luckily I have a couple of other K20s to look at.

Looking good so far! It will be much more fun going back together when that paint is done.

JDYUSA · 03-03-2004, 02:19 PM

Good to see the body after seeing the fenders. Did you pug the hole for the gas tank filler ....

If so, wher ya puttin the tank ?

junkyarddog1956 · 03-03-2004, 02:26 PM

Gonna be nice when it is done , looking good . jyd

lukecp · 03-03-2004, 02:48 PM

Isn't bare metal pretty?

**Yukon Jack** · 03-03-2004, 03:08 PM

Gas tank will be here

Used one of ebfabman's filler pieces for the gas tank hole.

They said they would be using an etch primer - not sure if that answers your question.

Clean metal is a beautiful thing.

Dean - I wish I did a better job on labeling stuff as I have a bad case of CRS!

71402BB · 03-03-2004, 06:26 PM

looking good! hey just remember if it takes them a little longer, then oh well, it's butter that they take alittle more time then to rush it and have it turn out bad and look like crap!

**Yukon Jack** · 03-03-2004, 07:12 PM

That is definitely true - and believe me, this project has taught me patience.

veedublu · 03-03-2004, 07:57 PM

Sorry if this has been covered in another post, but what color is it going to be?

John

**Yukon Jack** · 03-04-2004, 05:34 PM

The color will be a very light metallic silver.

Yesterday there was some great progress. Body guy has the passenger door hardware removed, and he has done a lot of work on the back of the cab. Being a farm truck, there were lots of problems on the back of the cab to clean up. Using a mig welder, the body guy used a stud puller to remove the dents.

He has the fenders in primer now and has some more block sanding to do to them.

Still a lot to get done, but progressing very well this week!

griesel72 · 03-04-2004, 06:28 PM

cool, i want to paint a truck silver one of these days. I think it will look nice

dubie · 03-04-2004, 07:05 PM

is that patchy looking stuff on the back of the cab , a skim coat? Starting to look nice and clean

03-01-2004, 01:59 PM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	A little body shop progress Here are a couple pics of the progress at the body shop. I'm supposed to stop by tonight and the body guy said a lot of work would be done on the cab by then. I'll cross my fingers. Anyway, the passenger fender had a dent in the upper front corner and both fenders had some old repairs. I removed most of the filler and he has smoothed the fenders out nicely. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 09:35 AM.

03-01-2004, 02:30 PM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	I can only dream about being that far along! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-01-2004, 02:30 PM	#4
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	lookin good!! Betcha can't wait to see some paint on that thing eh __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

03-01-2004, 02:42 PM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Where are your C/20 badges going? You're not deleting them are you? I see you left the holes for the "454" badges though __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-01-2004, 03:10 PM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Nope, the badges will go back, he just hasn't cleaned the holes out yet. And no, I'm not using 454 badges, those are the holes for the 4 Wheel Drive emblems. The 454 is gonna be incognito. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-01-2004, 02:05 PM	#2
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	Looking good!!! You will be caught up to me before you know it.

03-01-2004, 03:55 PM	#7
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	very nice, are you going to make your deadline? I'd like to see it done. __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

03-01-2004, 04:01 PM	#8
JDYUSA Registered User Join Date: Feb 2004 Location: Grapevine, TX Posts: 122	Your body Looks as though you are about ready for primer... coming a long fine. __________________ thx, JDY

03-01-2004, 04:21 PM	#9
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	The body guy says he will stick to the schedule, but I will be amazed if he can have it done as scheduled - just seems to be a lot that he has to still do. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-01-2004, 04:32 PM	#10
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	I think you need to come to Ohio and get this Blazer I have so you can run disk brakes on yours....lol

03-01-2004, 07:39 PM	#11
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	I'm jealous. I don't know when I'll be able to get started on my body, I just hope sometime this year. __________________ 72CheyenneSuper1ton4x4BigBlock

03-03-2004, 01:35 PM	#12
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Well, a little more progress, but a loooonnnnnnggggg way to go at this rate. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 09:35 AM.

03-03-2004, 01:36 PM	#13
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Front clip is torn apart now too. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 09:36 AM.

03-03-2004, 01:52 PM	#14
67Fleetsidedream Wiseass secured himself a BAN Join Date: Nov 2000 Location: MOON!!! Posts: 2,282	Lookin good. What kind of primer are they using. Regular or high production?

03-03-2004, 02:08 PM	#15
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	I sure hope you took a lot of pics and labeled everything before you took it apart...lol. I can't tell you how many times I forget how something goes back together. Luckily I have a couple of other K20s to look at. Looking good so far! It will be much more fun going back together when that paint is done.



Register or Log In To remove these advertisements.

03-03-2004, 02:19 PM	#16
JDYUSA Registered User Join Date: Feb 2004 Location: Grapevine, TX Posts: 122	I love your body... Good to see the body after seeing the fenders. Did you pug the hole for the gas tank filler .... If so, wher ya puttin the tank ? __________________ thx, JDY

03-03-2004, 02:26 PM	#17
junkyarddog1956 Registered User Join Date: Sep 2003 Location: Thorntown , Indiana Posts: 231	Gonna be nice when it is done , looking good . jyd __________________ 69 Chev C-10 ... painted and ready to reassemble ( for sale ) 82 Custom Deluxe ( have parts to restore )

03-03-2004, 02:48 PM	#18
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Isn't bare metal pretty? __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

03-03-2004, 03:08 PM	#19
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Gas tank will be here Used one of ebfabman's filler pieces for the gas tank hole. They said they would be using an etch primer - not sure if that answers your question. Clean metal is a beautiful thing. Dean - I wish I did a better job on labeling stuff as I have a bad case of CRS! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 09:36 AM.

03-03-2004, 06:26 PM	#20
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	looking good! hey just remember if it takes them a little longer, then oh well, it's butter that they take alittle more time then to rush it and have it turn out bad and look like crap! __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

03-03-2004, 07:12 PM	#21
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	That is definitely true - and believe me, this project has taught me patience. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-03-2004, 07:57 PM	#22
veedublu Registered User Join Date: Jul 2001 Location: Colorado Springs Posts: 159	Sorry if this has been covered in another post, but what color is it going to be? John __________________ 1976 K20 my dad bought new - longbed stepside, just turned 50k miles

03-04-2004, 05:34 PM	#23
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	The color will be a very light metallic silver. Yesterday there was some great progress. Body guy has the passenger door hardware removed, and he has done a lot of work on the back of the cab. Being a farm truck, there were lots of problems on the back of the cab to clean up. Using a mig welder, the body guy used a stud puller to remove the dents. He has the fenders in primer now and has some more block sanding to do to them. Still a lot to get done, but progressing very well this week! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 09:37 AM.

03-04-2004, 06:28 PM	#24
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	cool, i want to paint a truck silver one of these days. I think it will look nice __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

03-04-2004, 07:05 PM	#25
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	is that patchy looking stuff on the back of the cab , a skim coat? Starting to look nice and clean __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

Register or Log In To remove these advertisements.