Dome Light. Door Pins - Triggers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RICHARD MORGAN · 03-01-2004, 07:27 PM

MY DOME LIGHT WORKS GREAT BY TURNING THE KNOB BUT WONT COME ON BY THE DOOR PINS...BEFORE I BUST OUT THE OLD VOLT METER IS THERE SOMETHING SIMPLE IT COULD BE ? DOESNT THE WIRES COME OFF THE DOOR PINS AND TIE RIGHT INTO THE DOME LIGHT WIRING OR DOES THE PIN WIRES GO TO THE LIGHT SWITCH ?

da-burb · 03-01-2004, 07:35 PM

All the pins do is connect to a ground. My first guess is corrosion on the contacts. With the door open try turning the inner post back and forth. If that doesn't fix it then start tracing the white wires.

*Gee_Emm* · 03-01-2004, 09:07 PM

Try taking the door pins out, remove the wire from them and touch it to a good ground, that will tell you for sure if they are the problem

tom hand · 03-01-2004, 09:12 PM

MOST likely both door switches didn't fail....look for the white wires down by the fusebox and make sure the wire is not broken/unplugged.

superfly68 · 03-01-2004, 11:04 PM

what year did those start becoming an option?
don't think i have one in my '68...

Longhorn Man · 03-02-2004, 01:34 AM

69 was the first year for the option.
RICHARD MORGAN, I agree that it is not likely that they both went bad at the same time...have you in fact looked to see that your truck is equipped?
I only ask becouse i knew a dude with a 67 and he was going nuts trying to figure why the light wouldn't come on, turnd out there was no switch available.

03-01-2004, 07:27 PM	#1
RICHARD MORGAN Registered User Join Date: Jan 2004 Location: HERNDON VA Posts: 216	Dome Light. Door Pins - Triggers MY DOME LIGHT WORKS GREAT BY TURNING THE KNOB BUT WONT COME ON BY THE DOOR PINS...BEFORE I BUST OUT THE OLD VOLT METER IS THERE SOMETHING SIMPLE IT COULD BE ? DOESNT THE WIRES COME OFF THE DOOR PINS AND TIE RIGHT INTO THE DOME LIGHT WIRING OR DOES THE PIN WIRES GO TO THE LIGHT SWITCH ?

03-01-2004, 07:35 PM	#2
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	All the pins do is connect to a ground. My first guess is corrosion on the contacts. With the door open try turning the inner post back and forth. If that doesn't fix it then start tracing the white wires. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

03-01-2004, 09:12 PM	#4
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	MOST likely both door switches didn't fail....look for the white wires down by the fusebox and make sure the wire is not broken/unplugged. __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

03-01-2004, 11:04 PM	#5
superfly68 Registered User Join Date: Dec 2003 Location: Encinitas,CA Posts: 316	what year did those start becoming an option? don't think i have one in my '68... __________________ no longer have a ride, but still a fan!

03-01-2004, 09:07 PM	#3
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Try taking the door pins out, remove the wire from them and touch it to a good ground, that will tell you for sure if they are the problem

03-02-2004, 01:34 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	69 was the first year for the option. RICHARD MORGAN, I agree that it is not likely that they both went bad at the same time...have you in fact looked to see that your truck is equipped? I only ask becouse i knew a dude with a 67 and he was going nuts trying to figure why the light wouldn't come on, turnd out there was no switch available.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.