1972 C10 Short Step FOR SALE, cheap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72shorty · 03-13-2004, 01:20 AM

FOR SALE, 1972 Chevrolet C10, Short, Step. 95% original truck. Little rust, runs strong but does give a puff on start up. 250 L6, 3spd on column, 3.73 rear. New shocks (4) and windshield. Must see and drive to appreciate. Call 866-802-6800 and leave a message or PM me. Asking $3000 for the following:

-Truck

-Tilt steering column for automatic, has cruise button in turn lever, was told it was for 67-72 when I bought it but was told by a board member who viewed it that it's for a mid 70's pickup but will still work, just needs cleaned up and painted. Tilt works well, all levers intact and functioning fine, needs red indicator pointer.

Call 816-350-9494 and leave a message or PM me.

Take it ALL for $3000!!! Cash or Money Order. First come, first served.

Thanks!

LUV2XCLR8 · 03-13-2004, 01:27 AM

BRING IT TO MEMPHIS SUPER CHEVY, YOU MIGHT JUST WALK
HOME, NEVER CAN TELL WHAT PEOPLE ARE LOOKING FOR !

APRIL 16, 17, AND 18 - MEMPHIS MOTORSPORTS PARK, TN.

http://www.memphismotorsports.com/

Blue Beard · 03-13-2004, 09:40 AM

Nice looking truck....what rust is evident?

72shorty · 03-13-2004, 01:22 PM

Both cab corners need replaced, some pin holes in the right side of the bed near the floor, cab supports need replaced, both front inner fenders have silver dollar sized holes. All other fenders, rockers, cab, cowl, etc. is all clean and rust free.

72shorty · 03-15-2004, 10:46 AM

TTT, is $3300 fair?

Chevyguy111786 · 03-15-2004, 06:42 PM

probably fair due to the fact that it's original, but maybe a little steep due to the rust. probably depends on the market and the buyer. but it's not an out of the ball park price

72shorty · 03-15-2004, 07:31 PM

Chevyguy,

Thanks for the feedback. The rust is not as bad as it sounds. I am going to be laid off the end of this month and am looking for another job. I just wish someone would make me a decent offer at this point.

Thanks again!

LUV2XCLR8 · 03-15-2004, 09:08 PM

Thousands upon thousands of people at Super Chevy in Memphis
last year, it would be worth it to drive down for the day if it is not
to far for ya, your just south of St. louis near Herculaneum right ?
You never know who will be looking for what and you might have
the perfect something for someone. I have sold stuff there every
year for vary fare prices. Here is the link with SC rates and prices.

http://www.memphismotorsports.com/

360hp350 · 03-15-2004, 09:45 PM

Have any more pics? Wanna trade stuff or do you need cash?

72shorty · 03-16-2004, 12:59 AM

Cash is what I am needing, more stuff won't buy groceries or pay the mortgage.

Check this link for pics, this is where I had it listed before but with the new price. Let me know if you have questions.

http://67-72chevytrucks.com/vboard/s...threadid=81270

72shorty · 03-17-2004, 04:28 PM

LUV2XCLR8,

Wish I had the time and the resources to go to TN but unfortunately I don't.

TTT anyone?

Thanks!

Husker · 03-17-2004, 05:49 PM

How Much for the 250 Power steering setup?
Back To the Top also.
Ron

72shorty · 03-17-2004, 11:04 PM

Husker,

I'll sell you all this for $225 plus shipping or $75 plus shipping for the PS setup alone. Let me know and thanks.

-PS brackets and pulleys for 250 L6 in perfect condition, have been sandblasted and just need painted.

-PS setup, includes pump, steering sector and hoses.

-Tilt steering column for automatic, has cruise button in turn lever, was told it was for 67-72 when I bought it but was told by a board member who viewed it that it's for a mid 70's pickup but will still work, just needs cleaned up and painted. Tilt works well, all levers intact and functioning fine, needs red indicator pointer.

Husker · 03-17-2004, 11:55 PM

Doug,
$75.00 + shipping for the Whole Power steering setup? If it includes all listed below I will take it.
Ron

-PS brackets and pulleys for 250 L6 in perfect condition, have been sandblasted and just need painted.

-PS setup, includes pump, steering sector and hoses.

72shorty · 03-18-2004, 12:16 AM

Husker, check your email.

**ScottH** · 03-18-2004, 12:26 AM

Sorry to hear about your job, best of luck in finding another.

I was wondering if you would be interested in selling the posi unit. Any idea of what is was from? Any info is appreciated.

Thanks.

72shorty · 03-18-2004, 02:52 AM

I bought it off of ebay for $200. Used but supposedly in good working order, I never got to install it. I was told the following from the guy I bought it from: Heavy duty GM posi, limited slip differential, phase 4, used but it’s totally checked, all the spiders, side gears, clutch packs are good, ready for install, for 12 bolt. He said it came off a 1/2 ton chevy pickup. Honestly, I have no idea. I'd take $150 plus shipping.

Let me know and thanks!

DK

smoky02 · 03-18-2004, 11:22 AM

Yeah, I'll be looking for stuff at super chevy, and I'm bringing my 70 step to sell, so if I get decent money I might get urs..

72shorty · 03-22-2004, 11:20 AM

TTT, check out the reduced parts/price. Only asking $3100! Someone needs this truck.

72shorty · 04-06-2004, 03:13 AM

TTT, down to just the truck with tilt. Now only asking $3000 for this clean truck.

03-13-2004, 01:20 AM	#1
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	1972 C10 Short Step FOR SALE, cheap FOR SALE, 1972 Chevrolet C10, Short, Step. 95% original truck. Little rust, runs strong but does give a puff on start up. 250 L6, 3spd on column, 3.73 rear. New shocks (4) and windshield. Must see and drive to appreciate. Call 866-802-6800 and leave a message or PM me. Asking $3000 for the following: -Truck -Tilt steering column for automatic, has cruise button in turn lever, was told it was for 67-72 when I bought it but was told by a board member who viewed it that it's for a mid 70's pickup but will still work, just needs cleaned up and painted. Tilt works well, all levers intact and functioning fine, needs red indicator pointer. Call 816-350-9494 and leave a message or PM me. Take it ALL for $3000!!! Cash or Money Order. First come, first served. Thanks! Attached Images __________________ Douglas King Independence, MO Last edited by 72shorty; 04-06-2004 at 03:12 AM.

03-13-2004, 01:27 AM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	BRING IT TO MEMPHIS SUPER CHEVY, YOU MIGHT JUST WALK HOME, NEVER CAN TELL WHAT PEOPLE ARE LOOKING FOR ! APRIL 16, 17, AND 18 - MEMPHIS MOTORSPORTS PARK, TN. http://www.memphismotorsports.com/ __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-13-2004, 09:40 AM	#3
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Nice looking truck....what rust is evident? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

03-13-2004, 01:22 PM	#4
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	Both cab corners need replaced, some pin holes in the right side of the bed near the floor, cab supports need replaced, both front inner fenders have silver dollar sized holes. All other fenders, rockers, cab, cowl, etc. is all clean and rust free. __________________ Douglas King Independence, MO

03-15-2004, 10:46 AM	#5
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	TTT, is $3300 fair? __________________ Douglas King Independence, MO

03-15-2004, 06:42 PM	#6
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	probably fair due to the fact that it's original, but maybe a little steep due to the rust. probably depends on the market and the buyer. but it's not an out of the ball park price

03-15-2004, 07:31 PM	#7
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	Chevyguy, Thanks for the feedback. The rust is not as bad as it sounds. I am going to be laid off the end of this month and am looking for another job. I just wish someone would make me a decent offer at this point. Thanks again! __________________ Douglas King Independence, MO

03-15-2004, 09:08 PM	#8
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Thousands upon thousands of people at Super Chevy in Memphis last year, it would be worth it to drive down for the day if it is not to far for ya, your just south of St. louis near Herculaneum right ? You never know who will be looking for what and you might have the perfect something for someone. I have sold stuff there every year for vary fare prices. Here is the link with SC rates and prices. http://www.memphismotorsports.com/ __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-15-2004, 09:45 PM	#9
360hp350 Registered User Join Date: May 2003 Location: Springfield, MO Posts: 132	Have any more pics? Wanna trade stuff or do you need cash? __________________ 72 Chevy Chevelle - Firing off saturday morning 74 Chevy Blazer - 360 horsepower 350 78 Chevy Suburban - 454/TH400 parts truck for chevelle 88 Chevy S-Blazer - 2WD, no motor/trans FOR SALE $450 I will turn 19 in boot camp

03-16-2004, 12:59 AM	#10
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	Cash is what I am needing, more stuff won't buy groceries or pay the mortgage. Check this link for pics, this is where I had it listed before but with the new price. Let me know if you have questions. http://67-72chevytrucks.com/vboard/s...threadid=81270 __________________ Douglas King Independence, MO

03-17-2004, 04:28 PM	#11
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	LUV2XCLR8, Wish I had the time and the resources to go to TN but unfortunately I don't. TTT anyone? Thanks! __________________ Douglas King Independence, MO

03-17-2004, 05:49 PM	#12
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	How Much for the 250 Power steering setup? Back To the Top also. Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

03-17-2004, 11:04 PM	#13
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	Husker, I'll sell you all this for $225 plus shipping or $75 plus shipping for the PS setup alone. Let me know and thanks. -PS brackets and pulleys for 250 L6 in perfect condition, have been sandblasted and just need painted. -PS setup, includes pump, steering sector and hoses. -Tilt steering column for automatic, has cruise button in turn lever, was told it was for 67-72 when I bought it but was told by a board member who viewed it that it's for a mid 70's pickup but will still work, just needs cleaned up and painted. Tilt works well, all levers intact and functioning fine, needs red indicator pointer. __________________ Douglas King Independence, MO

03-17-2004, 11:55 PM	#14
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Doug, $75.00 + shipping for the Whole Power steering setup? If it includes all listed below I will take it. Ron -PS brackets and pulleys for 250 L6 in perfect condition, have been sandblasted and just need painted. -PS setup, includes pump, steering sector and hoses. __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

03-18-2004, 12:16 AM	#15
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	Husker, check your email. __________________ Douglas King Independence, MO



Register or Log In To remove these advertisements.

03-18-2004, 12:26 AM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Sorry to hear about your job, best of luck in finding another. I was wondering if you would be interested in selling the posi unit. Any idea of what is was from? Any info is appreciated. Thanks.

03-18-2004, 02:52 AM	#17
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	I bought it off of ebay for $200. Used but supposedly in good working order, I never got to install it. I was told the following from the guy I bought it from: Heavy duty GM posi, limited slip differential, phase 4, used but it’s totally checked, all the spiders, side gears, clutch packs are good, ready for install, for 12 bolt. He said it came off a 1/2 ton chevy pickup. Honestly, I have no idea. I'd take $150 plus shipping. Let me know and thanks! DK __________________ Douglas King Independence, MO

03-18-2004, 11:22 AM	#18
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Yeah, I'll be looking for stuff at super chevy, and I'm bringing my 70 step to sell, so if I get decent money I might get urs.. __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

03-22-2004, 11:20 AM	#19
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	TTT, check out the reduced parts/price. Only asking $3100! Someone needs this truck. __________________ Douglas King Independence, MO

04-06-2004, 03:13 AM	#20
72shorty Registered User Join Date: Aug 2003 Location: Independence, MO Posts: 216	TTT, down to just the truck with tilt. Now only asking $3000 for this clean truck. __________________ Douglas King Independence, MO

Register or Log In To remove these advertisements.