|
03-22-2004, 07:44 PM | #1 |
Registered User
Join Date: Feb 2004
Location: bedford,in
Posts: 63
|
engine id numbers
on the right bank of my 350 , on the tab in front of head i have these numbers , V022ICUB , can anyone give me info.
__________________
http://rick.nicholson.home.insightbb.com |
03-22-2004, 08:08 PM | #2 |
member #16
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Try this
http://www.nastyz28.com/decode.html
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/ |
03-22-2004, 09:52 PM | #3 |
Registered User
Join Date: Oct 2003
Location: Collinsville, OK
Posts: 33
|
Engine ID
That looks like it is a1977 350 from an Impala. 170 hp. 1 4 barrel
intake
__________________
1948 Chevy 3100 1931 Slant Window Ford 1947 Chevy Coupe 1966 VW Bug |
03-22-2004, 10:51 PM | #4 |
Registered User
Join Date: Oct 2001
Location: Grapevine, Tx.
Posts: 2,142
|
rickn
V is for the assembly plant = Towanda 02 is the month of manufature = February 21 is the day of the month = 21st FYstamp RPO CID appl VIN HP BBLS Body/Comments 1975 CUB 350 4 spd trans. J L48 165 4 Vette 1977 CUB 350 LM1 L 170 4 B You might want to look at the engine number on the rear of the block on the ledge behind the passenger head to determine what year of mfg. There are also some casting clocks in various locations that will enable you to determine the year. To be certain you will need to get all the codes and combine them to be more accurate. CUB Suffix points to two vehicles The 75 Vette block is 165 hp and the 77 full size car was 170hp
__________________
John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS |
03-23-2004, 12:42 AM | #5 |
Registered User
Join Date: Feb 2004
Location: bedford,in
Posts: 63
|
where are the other id numbers i can get to without pulling motor
__________________
http://rick.nicholson.home.insightbb.com |
03-23-2004, 02:18 AM | #6 |
Registered User
Join Date: Oct 2001
Location: Grapevine, Tx.
Posts: 2,142
|
rickn
Here is a link: There is two pages check them both, some great reading regarding block numbers. http://www.mortec.com/location.htm Without pulling the engine it will be kind of rough, you might have to wait until a better time. You already have a pretty good idea of what you have, a lot of stuff like 2 or 4 bolt mains is hard to confirm without having it apart. You can check the head casting numbers with the valve covers off. The main block casting number is in a place that is hard to see with the engine installed and it is in a place that typcally get covered with dirt and grease so not only will it be tough to read but even tougher to clean so you can read the numbers. The main one will be in either location 2 or sometimes location 3
__________________
John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS |
Bookmarks |
|
|