|
|
|
03-27-2004, 08:51 PM
|
#1 |
|
COMING SOON...
Join Date: Feb 2003
Location: Ft Worth TX
Posts: 406
|
brake pedal linkage
How in the world do you remove the old rod from the linkage when the threads are a bit frozen? Vice grips just do not hold the rod.
|
|
|
|
03-27-2004, 09:22 PM
|
#2 |
|
Inline 69
Join Date: Apr 2003
Location: valleysprings,california
Posts: 1,018
|
are you talking about the rod that goes into the master cylinder? If so ,,, its connected to the brake pedal , just unbolt it there ..jeff
|
|
|
|
|
03-27-2004, 09:33 PM
|
#3 |
|
COMING SOON...
Join Date: Feb 2003
Location: Ft Worth TX
Posts: 406
|
Yes, it's the rod that went into the m/c, but I'm converting to power discs, and with the new booster there's a rod that replaces the old one, but is supposed to screw into the original linkage. I have the linkage unbolted from the pedal, but I can't get the old rod out of the linkage.
|
|
|
|
|
03-27-2004, 11:47 PM
|
#4 |
|
It's a catastrophic success.
 
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Does it have a nut up against the clevis? If so its a lock, loosen it first, if not put a little heat on it and expand the threads.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
