|
|
|
04-14-2004, 01:03 AM
|
#1 |
|
Registered User
Join Date: May 2003
Location: Keizer, OR
Posts: 103
|
oil pan seals
I'm putting things back together and have got the timing chain cover on OK.
I'm pretty sure I need to pull the seal from the rear of the block out and install a new one. The old one seems pretty stuck, probably lots of rtv. Just wanted to check before I create more problems for myself. |
|
|
|
04-14-2004, 09:32 AM
|
#2 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
If you are referring to the rubber seal that fits into the groove on the outside of the rear main, yes, pull it off, clean up the groove and replace the seal.
Jim |
|
|
|
|
04-14-2004, 11:52 AM
|
#3 |
|
Registered User
Join Date: May 2003
Location: Keizer, OR
Posts: 103
|
Yup! That's the one. I was afraid to pull on it too hard until I talked to someone.
|
|
|
|
|
04-14-2004, 01:18 PM
|
#4 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
if you have the oilpan off do yourself a BIGG favor and get a one piece oilpan gasket
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
04-14-2004, 07:05 PM
|
#5 |
|
Registered User
Join Date: Nov 2003
Posts: 117
|
Yes, those one piece fel pro oil pan gaskets are the only way to fly for a no leak seal.
__________________
Just a little crazy 1970 chevy full size half ton, soon to be one ton running gear, 350 turbo, 205 case, 355c.i. |
|
|
|
|
04-14-2004, 11:30 PM
|
#6 |
|
Account Suspended
Join Date: Dec 2003
Location: Texas
Posts: 2,686
|
When using cork gaskets i dont run nothing but silocone on the front seal . use the rubber in the rear but silicone in the front wont ever have a leak
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
