Toolpimp here's the info - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rod · 11-02-2004, 07:30 PM

Heres a pic of the hubs we talked about.. I never told you about the warn hubs that will also fit. They are 19 spline and thats the correct axle in the pic also. Also shown is the Ford hub I told you that would fit also.

I opened up a spicer hub to show you the parts all in there.

I know the stuffs hard find.... and I know you need it. Let me know if you can't get anything.

Rod · 11-02-2004, 07:33 PM

Here's how you decode a GMC vin from 70 and 71....so its a 70 GMC vin you showed me , not a 71 as someone else told you.
Your front drums are a 1 year only item...harder to find than the hubs in my opinion.

Rod · 11-03-2004, 12:59 AM

Remembered about the older spicer hubs also.. they will work also.
typical 67-69 stuff. It should bolt on to a 70-72 also.

Rod · 11-04-2004, 12:50 AM

Here is a pic of Warn hubs on a 69 3/4 ton.

I can't remember if it needs the about 3 inch thick spacer like the spicers or not... I'll go look at it tomorrow.

11-02-2004, 07:30 PM	#1
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Toolpimp here's the info Heres a pic of the hubs we talked about.. I never told you about the warn hubs that will also fit. They are 19 spline and thats the correct axle in the pic also. Also shown is the Ford hub I told you that would fit also. I opened up a spicer hub to show you the parts all in there. I know the stuffs hard find.... and I know you need it. Let me know if you can't get anything. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

11-02-2004, 07:33 PM	#2
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	1970 and 1971 vin decoding. Here's how you decode a GMC vin from 70 and 71....so its a 70 GMC vin you showed me , not a 71 as someone else told you. Your front drums are a 1 year only item...harder to find than the hubs in my opinion. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

11-03-2004, 12:59 AM	#3
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Remembered about the older spicer hubs also.. they will work also. typical 67-69 stuff. It should bolt on to a 70-72 also. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

11-04-2004, 12:50 AM	#4
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Here is a pic of Warn hubs on a 69 3/4 ton. I can't remember if it needs the about 3 inch thick spacer like the spicers or not... I'll go look at it tomorrow. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.