![]() |
![]() |
#1 |
Registered User
Join Date: Jan 2002
Location: Woodinville, WA
Posts: 513
|
Where to get exhaust?
Looking to put some exhaust on my truck now that I just put in my 350. It has stock manifolds and I am looking for the cheapest possible.
I am thinking duals with glasspacks that empty before the tires but where it empties is not a big deal. I was just thinking before the tires because it might be cheaper. So, who sells something that is cheap that I can mock up myself? Thanks for the help guys.
__________________
Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
We have been using the dual exhaust set ups from LMC. They are galvanized, 2 1/4" and are complete with hangers, clamps, and gaskets. Fit is good and they are easy to install. They come with glass paks or stock, with turbos optional. We like the glass paks because we have had problems with the stock mufflers, (the
baffles came loose inside). We have been using these on some trucks since 96 and they are still in good shape. The clamps are light duty and we replace them with heavy duty. The cost of the glass pak setup is $149 plus shipping. We like the sound of the glass paks, also. Jim |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
I have the LMC kit with the turbo mufflers. I installed it last November. So far no problems. I agree with the fit and ease of installation comments above.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2001
Location: Long Beach, Ca
Posts: 1,432
|
Hooker has a nice set in 2 1/4, Go to the Holley web site to get the online cataloge and part number. Summit sells them for under $120
![]()
__________________
71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A> |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2000
Location: Frankfort, Kentucky, USA
Posts: 2,163
|
I have heard the quality of that hooker exhaust kit is crappy. Just a rummor though, i've never confirmed it.
__________________
'69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2002
Location: Woodinville, WA
Posts: 513
|
Thanks guys, I think that I will go ahead and order up from LMC today. I looked in their catalog and that looks the best. Anyone know how long it usually takes them to get it out? If not, no problem. Once again, you guys come through.
__________________
Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jun 2001
Location: Springfield, MO
Posts: 1,098
|
You would probably be better off going to a local shop. They tend to do high quality work, make sure everything is tight and use strong parts. I have glasspacks and chrome tips.... $190 at Rons Exhaust and Tires in Lexington. I am sure you could find a similar place there.
__________________
Nick Rodenberg 72 Cheyenne 10 V8 350/TH350 white/ochre/white/ochre, ochre/saddle interior Retired and in the dry... still runs. I now drive Red '01 Ford Focus... better MPG!!! |
![]() |
![]() |
![]() |
#8 |
user # 2756
![]() Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
I agree with nroden, support your local muffler man. My 2.5" exhaust, exit behind the rear wheels, was $160 not counting the mufflers I supplied. This was on a 4wd w/ vette ramhorns. You can get summit turbos for $15 a piece.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm ![]() |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2002
Location: Woodinville, WA
Posts: 513
|
All of the local shops that I had talked to quoted me something like $350 give or take a few bucks. I explained clearly that I don't want anything fancy, just something that works and is cheap. They said that was the best they could do. That is why I am going to do it myself.
Becuase of what you guys say, I might try calling a few more places for price quotes before I call LMC just in case I luck out and find a place.
__________________
Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: May 2000
Location: Alexandria, LA 71301
Posts: 1,451
|
350 for a plain jane dual setup, ....yea i'd go with LMC too.
last ones i had done were 120 with 2.5" pipe all the way out back. (i supplied the flowmasters)
__________________
-02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jan 2002
Location: Woodinville, WA
Posts: 513
|
I have heard a rumor that if you put glasspacks on backwards that they are louder. Maybe I just fell for the joke or there is some truth to it. As far as I knew, glasspacks were the same, front and back, just one long tube. Can someone clear this up for me. I think the joke just worked and I am on the receiving end.
![]()
__________________
Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall |
![]() |
![]() |
![]() |
#12 |
Recovering 67-72 Addict
![]() Join Date: Oct 2000
Location: North Bend, WA
Posts: 1,788
|
The shops that I talked to in the Seattle area were quoting me $550.00 and up! I like to support the local guys but I don't want to get bent over by them either!
__________________
68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women" |
![]() |
![]() |
![]() |
#13 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
225-275 here for basic custom duals, thats without turbo muffs that i would want over cheap red cherries... i guess thats not so bad a deal compared to some other regions,,,,
:S |
![]() |
![]() |
![]() |
#14 | |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Quote:
My GMC was run like that when I bought it. I do not recomend it. If you mus do this, use smaller pipes, and route the pipes all the way to the back of your truck, and out under the bumper. The noise will drive you crazy if you route it any other way (at least if it is a driver). The neighbors won't like you, but the city will love your income they will recieve from all your noise tickets. |
|
![]() |
![]() |
![]() |
#15 |
Vortec 350's Suck
Join Date: Nov 2000
Location: Pickardville Alberta Canada
Posts: 544
|
If you want super loud run a set of Turbo Tubes backwards, it makes a looud thing louder. At any rate you prices are very high. The shop I was at did a 72 GMC, basic 2 1/4" dual with packs and turndowns just before the rearend for $150 Canadian. It was a young guy strapped for cash and i thought the price he got was fairly cheap but even hear a basic dual with tailpipes on these trucks is $250 or less.
__________________
69 Chev CST 10 reg cab lwb Daily Driver: 92 Chev Reg Cab LWB Silverado 4x4, K.I.A 7:51 AM 04/22/03 Will be resurrected |
![]() |
![]() |
![]() |
#16 |
Genuine smartass
Join Date: Jun 2002
Location: Enid, OK - soon to be Rapid City, SD
Posts: 126
|
I'd go with a local shop - try to avoid the big chain run stores. Go to a locally owned shop (usually the dirty ones). They depend on your business for a living and will do a good job. I can get stainless duals in Oklahoma for about $350 so a normal dual exhaust job w/ glass is quite a bit less. Also I prefer to have the joints welded instead of clamped, but that's just me...
__________________
'99 Chevy 3/4 Burb 4x4 '98 Chevy 1/2 Short Bed 4x4 Former 67 & 72 owner Wanted: 1972 10 or 20 4X4, V8 4spd |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jun 2001
Location: Springfield, MO
Posts: 1,098
|
Just took a tire to for the old 1967 Ford 3000 tractor to Rons today... (the same place I got my exhaust). The tube had 4 holes in it so we decided to replace it...... $10 and thats the labor included. Thats hard to find. Hes a real good guy. I know patches are $5. Then he sells tires, exhaust, and does brake work.
By the way, I know I said F*rd but the old Ford tractors were good. But I like Internationals better.
__________________
Nick Rodenberg 72 Cheyenne 10 V8 350/TH350 white/ochre/white/ochre, ochre/saddle interior Retired and in the dry... still runs. I now drive Red '01 Ford Focus... better MPG!!! |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jan 2002
Location: Woodinville, WA
Posts: 513
|
Well, depsite what some of you guys said, I went ahead and ordered from LMC today. I really did not have the time to do any research being that I need to get this on the road because it is my daily driver.
If I find the time, I can practice my welding on it. I have never welded before and have always wanted to learn. A buddy has a welder that he said he would let me borrow and even show me a trick or two, so this is a good place to start learning to weld. And as much as I might get from this, I will probably turn those glasspacks backwards. I am running stock manifolds and the kit from LMC is only 2 1/4 all the way to the back. I like it loud, what can I say. Just wish I had the money for flow's or Borla to make the loud sound real nice. Thanks again guys.
__________________
Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall |
![]() |
![]() |
![]() |
#19 |
Genuine smartass
Join Date: Jun 2002
Location: Enid, OK - soon to be Rapid City, SD
Posts: 126
|
Put resonator tips on the end, they look good and you'll like the sound.....I promise
![]()
__________________
'99 Chevy 3/4 Burb 4x4 '98 Chevy 1/2 Short Bed 4x4 Former 67 & 72 owner Wanted: 1972 10 or 20 4X4, V8 4spd |
![]() |
![]() |
![]() |
#20 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
Definitely do some calling around or better yet, stop by a few shops. I got my dual system with Dynomax turbo mufflers for just under $200.00 routed all the way to behind the rear tires. Downside is I think it was just 2" tubing but I doubt going to 2 1/2" would have been much more - now why didn't I do that, grrrr!
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Jun 2001
Location: Springfield, MO
Posts: 1,098
|
I looked at my receipt and mine was $179 instead of $190 like I said. Dual Glasspacks with Chrome Tips.
__________________
Nick Rodenberg 72 Cheyenne 10 V8 350/TH350 white/ochre/white/ochre, ochre/saddle interior Retired and in the dry... still runs. I now drive Red '01 Ford Focus... better MPG!!! |
![]() |
![]() |
![]() |
#22 |
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
when i first did my motor was strapped for cash...
bolted glasspacks straight to the headers... very cheap and didn't sound to bad... drove it that way for a while finally got around to hooking up an actual exhaust... went to discount auto parts and got a bunch of 2 1/2" pipe, angled pieces, clamps, and chrome tips... and just slopped it all in there... pipes come out just behind the cab... louder now... ![]()
__________________
Beat it to fit, Paint it to match... ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|