|
12-07-2004, 07:02 PM
|
#1 |
|
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
Front drop springs?
I just bought a set of new 3" drop springs from a board member & stood one of the springs beside a stock front. WOW the new ones are quite a bit shorter just sitting there. Is this going to cause problems whenever I jack the front end up in the air? They look like they will be a real pain to keep in the pockets. I always thought they were the same (unsprung)height until there was aload on them...corn
|
|
|
|
12-07-2004, 08:45 PM
|
#2 |
|
You get what you pay for
 
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
|
Nope, they are probably right. I have 1.5" springs along with my 2.5" spindles and when I jack up the truck, they are not real tight. When I had 2" coils in it, they would move when it was jacked up. I'm sure someone with 3's will chime in but I imagine they would probably move around pretty good when raised.
BTW, they are supposed to be shorter, unsprung.
__________________
Mike 1985 Chevy C-10 |
|
|
|
|
12-07-2004, 09:09 PM
|
#3 |
|
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
Thanks Mike. Im hoping to stick them in this weekend. 6-8 here we come...corn
|
|
|
|
|
12-08-2004, 12:06 PM
|
#4 |
|
Registered User
Join Date: Sep 2002
Location: Liberty, Mississippi
Posts: 672
|
You can put a longer rubber bumper on the bottom of your upper control arm, or a spacer on the front crossmember where the bumper contacts. That will limit your downward travel to keep the springs in the pocket while jacking.
Virgil |
|
|
|
|
12-08-2004, 02:09 PM
|
#5 |
|
Registered User
Join Date: Jun 2004
Location: Lake Charles, LA
Posts: 206
|
i have 3 inch springs and they stay in there pretty good actually when i put the right side on and bolted the control arm in i didnt realize that it wasnt in on the top and i just drove it down my driveway and it popped in place
|
|
|
|
|
12-08-2004, 02:48 PM
|
#6 |
|
Mudslides 'r my specialty
Join Date: Dec 2003
Location: STL
Posts: 1,106
|
Just put your jack under the ball joint when you jack it up...
__________________
Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
