Parting it out air bagged 1972 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wdz28ss · 12-28-2004, 10:20 PM

Talked about it and here is whats left:

chrome 22's and tires with 50%ish tread - $1800

Brand new Gaylord hard fiberglass toneau cover - $800

3.08 posi disc brake rear end with correct new proportioning valve - $400

I am about 30 miles north of SLC Utah, so please keep this in mind for those interested. Thank you.

I will post some individual pics as soon as light and time permits

Bamm · 12-28-2004, 10:30 PM

Hate to see it, looks like that had the makings of a tight ride!!!!!!

PrimeredThunder · 12-29-2004, 12:01 AM

Good luck on the sale, wdz28ss is a great guy to deal with,
I wish I had the funds to buy the parts, but that would mean selling my truck and then having nothing to mount them on...lol

c-1072 · 12-29-2004, 12:06 AM

are the bed side long or short ?

wdz28ss · 12-29-2004, 12:17 AM

short fleet side wide box bedsides

Deuce · 12-29-2004, 12:35 AM

Can you post pics of some of the stuff you have for sale. Wheels ect.

steve75104 · 12-29-2004, 12:40 AM

PM sent

wdz28ss · 12-29-2004, 12:41 AM

here's the thread from selling everything....there's a few pictures of some of the stuff, I will take more pictures and post them up as soon as I can get home before the sun sets.

http://67-72chevytrucks.com/vboard/s....php3?t=126978

67ChevyC10Stepside · 12-29-2004, 01:11 AM

may i ask why you are parting out such a nice truck?

Chevy4Life · 12-29-2004, 02:52 AM

I'm interested in the bedsides. What's up with the side markers, looks like there shaved or starting to be shaved. Are the stake pockets filled. You know anyone that makes trips to St. George? I know a guy that runs a shuttle up there, but i'm not sure if they would fit in his trailer.

Vince Putt · 12-29-2004, 06:59 AM

PM Sent I'm interested in the motor combo

vtblazer · 12-29-2004, 08:36 AM

Quote:

Originally Posted by wdz28ss

Talked about it and here it is:

fuel injected LT1 and 700r4 trans, fuel injection specialities wiring harness/computer (plug in and run), fuel pump, new radiator and electric fans, everything needed to run in your truck - $1500

Just checking, is the 1500 for motor/tranny and all fuel injection parts?
If so, interested.

NPilot1975 · 12-29-2004, 09:20 AM

wds28ss - Would your 7 inch step lay the frame on 20's? I am thinking of running 18's up front and 20's in back and want to lay frame.

**special-K** · 12-29-2004, 09:33 AM

He`s parting it`cuz no bites on complete truck.What a shame,hate to see it,alot of work gone.

wdz28ss · 12-29-2004, 10:05 AM

ummmm....bedsides are new with no work done to them.....motor/trans with all accessories needed to run......doubtful a 7" step would lay with 20's I do have a 11" step though that would do it for sure...

Chevy4Life · 12-29-2004, 10:54 AM

oh.. I see now. That pic just looked kinda wierd.

meathead95 · 12-29-2004, 11:11 AM

could you send me pics of tall the air stuff to meathead95@hotmail.com and some more details on it. is everything their to put it on my 72 2wd blazer?

71swb4x4 · 12-29-2004, 12:03 PM

I am also interested in the air stuff. Does that include the plates to mount the bags? Please send pictures and info to shawnstorhaug@hotmail.com

bagged_gmc · 12-29-2004, 01:00 PM

Would you part out just the 8 valves, line, and fittings...thanks

bagged91 · 12-29-2004, 01:40 PM

Damn! I wish I still have some money in my pocket! I would have JUMPED on the rear, front suspension & the 22'z... Shame to bust it up... Good luck! TTT for ya!

HeavyD · 12-29-2004, 02:19 PM

sent pm.

wdz28ss · 12-29-2004, 10:58 PM

here's a couple pics of the engine

wdz28ss · 12-29-2004, 11:02 PM

here is a few pics of the cab

wdz28ss · 12-29-2004, 11:05 PM

pictures of the bling bling

wdz28ss · 12-29-2004, 11:08 PM

pictures of the air bag set up

12-28-2004, 10:20 PM	#1
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	Parting it out air bagged 1972 Talked about it and here is whats left: chrome 22's and tires with 50%ish tread - $1800 Brand new Gaylord hard fiberglass toneau cover - $800 3.08 posi disc brake rear end with correct new proportioning valve - $400 I am about 30 miles north of SLC Utah, so please keep this in mind for those interested. Thank you. I will post some individual pics as soon as light and time permits __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had" Last edited by wdz28ss; 02-03-2005 at 07:41 PM.

12-28-2004, 10:30 PM	#2
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Hate to see it, looks like that had the makings of a tight ride!!!!!! __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

12-29-2004, 12:01 AM	#3
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Good luck on the sale, wdz28ss is a great guy to deal with, I wish I had the funds to buy the parts, but that would mean selling my truck and then having nothing to mount them on...lol __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

12-29-2004, 12:06 AM	#4
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	bed sides are the bed side long or short ?

12-29-2004, 12:17 AM	#5
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	short fleet side wide box bedsides __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

12-29-2004, 12:35 AM	#6
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Can you post pics of some of the stuff you have for sale. Wheels ect. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

12-29-2004, 12:40 AM	#7
steve75104 Another 69-20 years later Join Date: Oct 2004 Location: Cedar Hill, TX Posts: 94	PM sent

12-29-2004, 12:41 AM	#8
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	here's the thread from selling everything....there's a few pictures of some of the stuff, I will take more pictures and post them up as soon as I can get home before the sun sets. http://67-72chevytrucks.com/vboard/s....php3?t=126978 __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

12-29-2004, 01:11 AM	#9
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	may i ask why you are parting out such a nice truck? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-29-2004, 02:52 AM	#10
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	I'm interested in the bedsides. What's up with the side markers, looks like there shaved or starting to be shaved. Are the stake pockets filled. You know anyone that makes trips to St. George? I know a guy that runs a shuttle up there, but i'm not sure if they would fit in his trailer. Last edited by Chevy4Life; 12-29-2004 at 07:05 AM.

12-29-2004, 06:59 AM	#11
Vince Putt Hippy Join Date: Sep 2004 Location: kaska, pa Posts: 95	PM Sent I'm interested in the motor combo

12-29-2004, 09:20 AM	#13
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	wds28ss - Would your 7 inch step lay the frame on 20's? I am thinking of running 18's up front and 20's in back and want to lay frame. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

12-29-2004, 09:33 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	He`s parting it`cuz no bites on complete truck.What a shame,hate to see it,alot of work gone. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-29-2004, 10:05 AM	#15
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	ummmm....bedsides are new with no work done to them.....motor/trans with all accessories needed to run......doubtful a 7" step would lay with 20's I do have a 11" step though that would do it for sure... __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

12-29-2004, 10:54 AM	#16
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	oh.. I see now. That pic just looked kinda wierd.



Register or Log In To remove these advertisements.

12-29-2004, 11:11 AM	#17
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	could you send me pics of tall the air stuff to meathead95@hotmail.com and some more details on it. is everything their to put it on my 72 2wd blazer? __________________ 72 2wd blazer 72 swb 4x4

12-29-2004, 12:03 PM	#18
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I am also interested in the air stuff. Does that include the plates to mount the bags? Please send pictures and info to shawnstorhaug@hotmail.com __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-29-2004, 01:00 PM	#19
bagged_gmc Shaved Join Date: Nov 2004 Location: Vernon, Tx Posts: 115	Would you part out just the 8 valves, line, and fittings...thanks __________________ 1969

12-29-2004, 01:40 PM	#20
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Damn! I wish I still have some money in my pocket! I would have JUMPED on the rear, front suspension & the 22'z... Shame to bust it up... Good luck! TTT for ya! __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

12-29-2004, 02:19 PM	#21
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	sent pm. __________________ "You can take the man out of PA, but you can't take PA out of the man"

12-29-2004, 10:58 PM	#22
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	here's a couple pics of the engine Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

12-29-2004, 11:02 PM	#23
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	here is a few pics of the cab Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

12-29-2004, 11:05 PM	#24
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	pictures of the bling bling Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

12-29-2004, 11:08 PM	#25
wdz28ss Registered User Join Date: Sep 2002 Location: Clinton, Ut Posts: 230	pictures of the air bag set up Attached Images __________________ '72 Cheyenne super, short-fleet, air-tilt-tach, fuel injected LT1, 700r4, 3.08 posi, 4WDB, step notched and bagged. "the one i wish i still had"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.