01-04-2005, 01:13 PM | #1 |
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
69 4x4 brake drums
Where can a guy find the 2x12 front drums for the closed knuckle front 4x4 axle, 3/4 ton?? I have had qoutes of 150 dollars per 1 drum!!!! There has got to be a better deal somewhere.
What options are out there?? Is there a disc conversion with out swapping the entire axle assy???? Thank you, Dave |
01-04-2005, 02:46 PM | #2 |
Registered User
Join Date: Mar 2002
Location: Dallas, TX
Posts: 555
|
I have a 68 and bought them at NAPA, $100 each.
__________________
1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX |
01-04-2005, 10:19 PM | #3 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
The only disc conversion would be to purchase a 71 or newer axle. The closed knuckles never came with discs.
Erl is your 68 a long step?
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
01-05-2005, 12:22 AM | #4 |
Registered User
Join Date: Sep 2002
Location: Burlington, WA
Posts: 298
|
I have an a 69 Chev front 3/4 ton 4x4 Drum setup in my backyard. What's you 20? You can have them if you pull them off.
__________________
1971 GMC Sierra 3/4 Ton 4x4 1972 Chevrolet SWB 4x4 RIP LeRoy |
01-05-2005, 12:42 AM | #5 |
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
I got a bud with a 69 3/4 4x4 front drums also...but they wouldn't be free. If your interested in paying for some let me know. I'll pass the message along.
__________________
Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. |
01-05-2005, 10:04 AM | #6 |
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
Do you happen to remember the Napa number. All they show is 60 to 63 models and they are about 115.00 dollars. However I could bore out to 12.160 according to what is cast on a Century drum on one side. The other is Budd brand and no numbers other than part that I can find. I am in Medford Oregon area.
Thanks, Dave |
01-05-2005, 01:53 PM | #7 |
Registered User
Join Date: Mar 2002
Location: Dallas, TX
Posts: 555
|
Wolfthing2000,
I will look for the part number tonight. Jims70GMC, Yes, it is an original long step side.
__________________
1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX |
01-06-2005, 10:40 AM | #8 |
Registered User
Join Date: Mar 2002
Location: Dallas, TX
Posts: 555
|
I remember now that NAPA could not find these for me either. But, I used my GMC Master Parts Book to find the GM number. We crossed this to a NAPA number.
Front brake drum NAPA 640-1020 $77 Rear brake drum NAPA 640-1202 $99 Let us kow if these are still available. Erl
__________________
1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|