83-87 misc. stuff for sale. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NotLowerThanMe · 01-25-2005, 12:11 AM

I'm selling some stuff off of my 86 C30 dually.

I have dual crew cab gas tanks for sale. There in good condition will come with the switch over pump. There 20 gallon tanks. I'm asking a $100 for them together or will sell them seperate if anyone is interested.

I have a a/c system that came off my 454. It has the blower motor condensor box, the heater box and controls for under the dash. The compressor. The only thing I dont have is the condensor for the radiator. I'm asking $50 for it. It was still working when I pulled it.

I have a bench seat should fit all 83-87 cabs crew cab or regular. It is Dark Blue vinyl it isn't faded or cracked or torn. I'm asking $25 for it but you will probably have to pick it up. Since shipping would be crazy.

I have the axles out of my rearend, there in excellent condition and have 98,000 miles on them which is the original trucks milage. They fit the Dana 70 rearend.

I have a bbc intake manifold. It has been media blasted and looks brand new. I'm asking $35 for it.

I think that is it. If you would like pictures of any of the parts above. Just send me an email to nic@crazytalkcustoms.com and i'll be sure to send one your way.

Thanks

dons454s · 01-25-2005, 01:21 AM

is the intake alum or cast iron??

NotLowerThanMe · 01-25-2005, 12:20 PM

It is cast iron.

86 Black Beauty · 02-06-2005, 07:36 AM

Sorry for the late post but I don't get to check this forum very oftern.

Do you have the fuel tank suppport brackets and are they in good shape?

If so, I would be interested in them.

The parts manual shows 4 supports. The left and right sides are the same, but the front part number is different than the rear part number.

I have a 16 gallon dual tank setup and need new tanks and supports. I think I'll go for new gas tanks though.

Thanks

John39671 · 02-06-2005, 12:13 PM

Is the bench seat out of a crew cab? If so does it fold forward or is it solid? Can you send pics to; rs_ss72_402@yahoo.com

NotLowerThanMe · 02-07-2005, 03:29 AM

The bench seat is out of a Crew cab, it does flip forward. I'll send a pic in the morning.

**old Rusty C10** · 02-07-2005, 12:41 PM

sent ya an email regarding the air condition set up

benscool1 · 02-07-2005, 07:26 PM

How much for the daul tank switch over valve, lines and all the electrical for it including the switch? benscool1@gmail.com

rich-white · 02-07-2005, 09:16 PM

glad you saw ben I was going to ask. How about a wiper switch?

NotLowerThanMe · 02-08-2005, 01:55 PM

The dual tank switch, wiring, and pump, I'll sell for $30.

Nic

87SierraClassic · 02-15-2005, 10:22 PM

if the seat isn't sold can you put me in line for the seat adjuster brackets?

01-25-2005, 12:11 AM	#1
NotLowerThanMe Registered User Join Date: Nov 2003 Location: East Bethel, MN Posts: 27	83-87 misc. stuff for sale. I'm selling some stuff off of my 86 C30 dually. I have dual crew cab gas tanks for sale. There in good condition will come with the switch over pump. There 20 gallon tanks. I'm asking a $100 for them together or will sell them seperate if anyone is interested. I have a a/c system that came off my 454. It has the blower motor condensor box, the heater box and controls for under the dash. The compressor. The only thing I dont have is the condensor for the radiator. I'm asking $50 for it. It was still working when I pulled it. I have a bench seat should fit all 83-87 cabs crew cab or regular. It is Dark Blue vinyl it isn't faded or cracked or torn. I'm asking $25 for it but you will probably have to pick it up. Since shipping would be crazy. I have the axles out of my rearend, there in excellent condition and have 98,000 miles on them which is the original trucks milage. They fit the Dana 70 rearend. I have a bbc intake manifold. It has been media blasted and looks brand new. I'm asking $35 for it. I think that is it. If you would like pictures of any of the parts above. Just send me an email to nic@crazytalkcustoms.com and i'll be sure to send one your way. Thanks

02-06-2005, 07:36 AM	#4
86 Black Beauty Registered User Join Date: Dec 2004 Location: Clearwater, FL Posts: 1	86 Dual Fuel Tanks Sorry for the late post but I don't get to check this forum very oftern. Do you have the fuel tank suppport brackets and are they in good shape? If so, I would be interested in them. The parts manual shows 4 supports. The left and right sides are the same, but the front part number is different than the rear part number. I have a 16 gallon dual tank setup and need new tanks and supports. I think I'll go for new gas tanks though. Thanks __________________ 1/2 Ton, 305 H Code, 350C Turbo, 3:08 10-Bolt, Tilt, Cruise, AC, Dual Tanks, No rust, Never been wrecked, Nice Old Truck.

02-06-2005, 12:13 PM	#5
John39671 Registered User Join Date: Oct 2004 Location: Baker City,Oregon Posts: 278	Is the bench seat out of a crew cab? If so does it fold forward or is it solid? Can you send pics to; rs_ss72_402@yahoo.com __________________ Dissabled Veteran U.S.M.C 1985-1989

02-07-2005, 12:41 PM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,319	sent ya an email regarding the air condition set up __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

02-07-2005, 07:26 PM	#8
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	How much for the daul tank switch over valve, lines and all the electrical for it including the switch? benscool1@gmail.com __________________ Ben 84 C10 Silverado 14 Silverado Z71

01-25-2005, 01:21 AM	#2
dons454s Registered User Join Date: Nov 2004 Location: Claysburg, Pa Posts: 408	is the intake alum or cast iron??

01-25-2005, 12:20 PM	#3
NotLowerThanMe Registered User Join Date: Nov 2003 Location: East Bethel, MN Posts: 27	It is cast iron.

02-07-2005, 03:29 AM	#6
NotLowerThanMe Registered User Join Date: Nov 2003 Location: East Bethel, MN Posts: 27	The bench seat is out of a Crew cab, it does flip forward. I'll send a pic in the morning.

02-07-2005, 09:16 PM	#9
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	glad you saw ben I was going to ask. How about a wiper switch?

02-08-2005, 01:55 PM	#10
NotLowerThanMe Registered User Join Date: Nov 2003 Location: East Bethel, MN Posts: 27	The dual tank switch, wiring, and pump, I'll sell for $30. Nic

02-15-2005, 10:22 PM	#11
87SierraClassic Registered User Join Date: Sep 2003 Location: Austin, TX Posts: 14	if the seat isn't sold can you put me in line for the seat adjuster brackets?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.