GM Goodwrench 350 motor F/S Truck included - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davidt · 01-28-2005, 01:51 PM

Selling a 1970 Chevy long bed 1/2 ton 2wd air cab truck. The real value here I feel is in the motor. It is a goodwrench crate motor (350), never had a valve cover off. Runs flawless, has new water pump, 110 amp alternator, new GM HEI, MSD cap and coil, Taylor wires, new 4 core radiator, headers, no a/c compressor or lines. NOt sure of the mileage because the speedometer does no work, but I would guess 50-60K. Has a TH 350 tranny that shifts greeat, no leaks. I rarely drive this truck unless I am doing yard work or hauling one of my other trucks. The truck is a typical old work truck with rust in all the usual places, has new brakes, new booster, new master cylinder, and wheel cylinders front and rear. I will post pics in a couple of days. It is located in the west TN area. Asking $1200 firm.

CHEVYE · 01-28-2005, 01:55 PM

can`t wait to see those pics!!!

67mbsc · 01-28-2005, 03:02 PM

Hey!
Sent ya a PM.

**'70_402** · 01-28-2005, 03:17 PM

very interested.....
where are you located.... is the truck worthy of a road trip?? i am in the texas panhandle and have a buddy that has some money burning a whole in his pocket for one of these trucks.....
i will be looking for some pics on here..
or you can e-mail them to me
rick.blain@topographic.com

thanks

davidt · 01-28-2005, 03:24 PM

Quote:

Originally Posted by 70'_402

very interested.....
where are you located.... is the truck worthy of a road trip?? i am in the texas panhandle and have a buddy that has some money burning a whole in his pocket for one of these trucks.....
i will be looking for some pics on here..
or you can e-mail them to me
rick.blain@topographic.com

thanks

Definitely road worthy, I drive the truck with no problems. I'm in Munford, TN, about 30 miles North of Memphis.

davidt · 01-28-2005, 03:33 PM

It will dark by the time I get home tonight so I will try to take some pics in the morning and email to ya'll.

LUV2XCLR8 · 01-28-2005, 05:01 PM

Quote:

Originally Posted by CHEVYE

can`t wait to see those pics!!!

WHERE DO YOU PUT ALL OF THESE TRUCKS YOU BUY

davidt · 01-28-2005, 05:10 PM

Quote:

Originally Posted by LUV2XCLR8

WHERE DO YOU PUT ALL OF THESE TRUCKS YOU BUY

Thats the problem, It's starting to look a little crowded around here!
To many projects, not enough time.

davidt · 01-30-2005, 10:34 PM

pics sent

AdamInTN · 01-30-2005, 10:41 PM

Do you have any pics and some more details about the truck.

CHEVYE · 01-31-2005, 11:42 AM

could you get some pics on the board here?

Blue Beard · 01-31-2005, 12:15 PM

Yea, post some pics.....

davidt · 01-31-2005, 02:15 PM

figured it out, here are the pics, you will notice the fuel line is disconnected because I was in the middle of changing the carburetor

CHEVYE · 01-31-2005, 03:31 PM

man that`s a deal!

**smitty62** · 01-31-2005, 03:37 PM

David--does it still have drum brakes? Do you know the rear end ratio? Thanks!

davidt · 01-31-2005, 04:21 PM

Quote:

Originally Posted by smitty62

David--does it still have drum brakes? Do you know the rear end ratio? Thanks!

Yep drums all the way around, never checked the rear end ratio.

CHEVYE · 01-31-2005, 05:46 PM

pm`d ya.

davidt · 02-03-2005, 04:11 PM

ttt

CHEVYE · 02-03-2005, 04:26 PM

hey david, friday is when i`ll be calling you, thanks.

davidt · 02-22-2005, 11:07 AM

truck is SOLD! thanks everyone.

01-28-2005, 01:51 PM	#1
davidt Registered User Join Date: Dec 2004 Location: Munford, TN Posts: 55	GM Goodwrench 350 motor F/S Truck included Selling a 1970 Chevy long bed 1/2 ton 2wd air cab truck. The real value here I feel is in the motor. It is a goodwrench crate motor (350), never had a valve cover off. Runs flawless, has new water pump, 110 amp alternator, new GM HEI, MSD cap and coil, Taylor wires, new 4 core radiator, headers, no a/c compressor or lines. NOt sure of the mileage because the speedometer does no work, but I would guess 50-60K. Has a TH 350 tranny that shifts greeat, no leaks. I rarely drive this truck unless I am doing yard work or hauling one of my other trucks. The truck is a typical old work truck with rust in all the usual places, has new brakes, new booster, new master cylinder, and wheel cylinders front and rear. I will post pics in a couple of days. It is located in the west TN area. Asking $1200 firm. Last edited by davidt; 01-31-2005 at 04:22 PM.

01-28-2005, 01:55 PM	#2
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	can`t wait to see those pics!!! __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-28-2005, 03:02 PM	#3
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Sent You A PM Hey! Sent ya a PM.

01-28-2005, 03:17 PM	#4
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	very interested..... where are you located.... is the truck worthy of a road trip?? i am in the texas panhandle and have a buddy that has some money burning a whole in his pocket for one of these trucks..... i will be looking for some pics on here.. or you can e-mail them to me rick.blain@topographic.com thanks __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

01-30-2005, 10:41 PM	#10
AdamInTN Registered User Join Date: Jan 2005 Posts: 11	Do you have any pics and some more details about the truck. __________________ Thanks Guys Adam

01-28-2005, 03:33 PM	#6
davidt Registered User Join Date: Dec 2004 Location: Munford, TN Posts: 55	It will dark by the time I get home tonight so I will try to take some pics in the morning and email to ya'll.

01-30-2005, 10:34 PM	#9
davidt Registered User Join Date: Dec 2004 Location: Munford, TN Posts: 55	pics sent

01-31-2005, 11:42 AM	#11
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	could you get some pics on the board here? __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-31-2005, 12:15 PM	#12
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Yea, post some pics..... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-31-2005, 02:15 PM	#13
davidt Registered User Join Date: Dec 2004 Location: Munford, TN Posts: 55	figured it out, here are the pics, you will notice the fuel line is disconnected because I was in the middle of changing the carburetor Attached Images Last edited by davidt; 01-31-2005 at 02:18 PM.

01-31-2005, 03:31 PM	#14
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	man that`s a deal! __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-31-2005, 03:37 PM	#15
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	David--does it still have drum brakes? Do you know the rear end ratio? Thanks! __________________ Stepsides look like real trucks! Smitty

01-31-2005, 05:46 PM	#17
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	pm`d ya. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

02-03-2005, 04:11 PM	#18
davidt Registered User Join Date: Dec 2004 Location: Munford, TN Posts: 55	ttt

02-03-2005, 04:26 PM	#19
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	hey david, friday is when i`ll be calling you, thanks. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback



Register or Log In To remove these advertisements.

02-22-2005, 11:07 AM	#20
davidt Registered User Join Date: Dec 2004 Location: Munford, TN Posts: 55	truck is SOLD! thanks everyone.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.