engine needed! (northern California) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jeremy_5 · 01-29-2005, 09:22 PM

I started a machinest class and need a engine to perform the work on. Pretty much any engine will work. I don't have much money so before hitting up the junk yards I wanted to see if anyone had a old junk one lying around that was getting in the way

For now I don't even need a whole block, just a complete set of heads will work. This might be a long shot but if anyone has one let me know.

Purs · 01-29-2005, 09:49 PM

Jeremy, I had (have) a set of Big Block heads that I would've sent with you when you were here if I would've known. If you make another road trip let me know. I'll drag them out for you.

bigjimzlll · 01-29-2005, 09:54 PM

I have a 283 in a box if you want it.....

extd56 · 01-29-2005, 11:20 PM

I have a 350, it has one head on it. I will let it go for 50.00. I believe it is a standard bore. The block number is 3970010. I am also looking for an aluminum intake manifold.

extd56 · 01-30-2005, 12:06 AM

I think I have a set of heads I will throw in too if I still have them, will have to look.

scootergmc · 01-30-2005, 01:25 AM

I have a SB 350 (I believe) complete and assembled you can have for free. You must also take a set of Small Block 400 heads. The 350 ran when I drove it home and pulled it out. That was 5 years ago. Been stored in a garage since that time. If you feel like giving me something for it go ahead, but I don't really care. Just trying to help someone else out with something I don't need. Shoot me an email: scootergmc@yahoo.com

**kwmech** · 01-30-2005, 01:39 AM

I have a complete 305 chevy long block you can have if you come pick it up in Grasss Valley

zooza · 01-30-2005, 01:53 AM

good luck with your classes , I'm an industrial machinist with a lot of school and no on the job experience. ( couldnt take the cut in pay for changing jobs) But i've found my calling in law enforcement.
Enjoy those classes! we're all pullin' for ya!

scootergmc · 01-30-2005, 02:01 AM

And if you're really looking for stuff to do I have a TH400 2wd tranny and an SM465 2wd tranny. Both worked when removed. Interested in a 350 short block that got water down a hole? It's a machinist's dream...

bigjimzlll · 01-30-2005, 02:16 AM

Quote:

Originally Posted by extd56

I have a 350, it has one head on it. I will let it go for 50.00. I believe it is a standard bore. The block number is 3970010. I am also looking for an aluminum intake manifold.

I have a nice weiand stealth if you want to swap.

extd56 · 01-30-2005, 11:53 AM

any pictures?

scootergmc · 01-30-2005, 04:50 PM

Hey Jeremy 5: I posted an ad here in the classifieds so let me know asap if you want them.

Jeremy_5 · 01-30-2005, 05:22 PM

First off I want to thank everyone for the responses, I really appreciate you guys trying to help me out.

Brit: I wish I would have known when I came down to Texas too, but we weren't suppose to need an engine for this class, they were suposse to be supplied, but I guess the plans changed

bigjimzlll: I would love that little 283, I wish you weren't so far away. I would come and get it but I need the engine by this week.

scootergmc: I am sending you a pm about the engine.

Thanks to everyone for the offers!!!

**tnblazerk5** · 01-30-2005, 05:39 PM

heres a free one in cali
http://67-72chevytrucks.com/vboard/s....php3?t=138384

scootergmc · 01-30-2005, 05:40 PM

That's me. Jeremy 5, you have your reply. Email me.

scootergmc · 01-30-2005, 06:01 PM

Hey Jeremy: I have a guy right behind you. If I don't hear from you by 2:30pm, this guy gets it all. I PM'd you my cell. I'll PM again.

01-29-2005, 09:22 PM	#1
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	engine needed! (northern California) I started a machinest class and need a engine to perform the work on. Pretty much any engine will work. I don't have much money so before hitting up the junk yards I wanted to see if anyone had a old junk one lying around that was getting in the way For now I don't even need a whole block, just a complete set of heads will work. This might be a long shot but if anyone has one let me know. __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20 Last edited by Jeremy_5; 01-29-2005 at 09:24 PM.

01-29-2005, 09:49 PM	#2
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	Jeremy, I had (have) a set of Big Block heads that I would've sent with you when you were here if I would've known. If you make another road trip let me know. I'll drag them out for you. __________________ "Experience is what you get when you didn't get what you wanted."

01-29-2005, 09:54 PM	#3
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	I have a 283 in a box if you want it..... __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

01-29-2005, 11:20 PM	#4
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	I have a 350, it has one head on it. I will let it go for 50.00. I believe it is a standard bore. The block number is 3970010. I am also looking for an aluminum intake manifold. Attached Images Last edited by extd56; 01-29-2005 at 11:55 PM.

01-30-2005, 02:01 AM	#9
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	And if you're really looking for stuff to do I have a TH400 2wd tranny and an SM465 2wd tranny. Both worked when removed. Interested in a 350 short block that got water down a hole? It's a machinist's dream... Last edited by scootergmc; 01-30-2005 at 05:21 PM.

01-30-2005, 12:06 AM	#5
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	I think I have a set of heads I will throw in too if I still have them, will have to look.

01-30-2005, 01:25 AM	#6
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	I have a SB 350 (I believe) complete and assembled you can have for free. You must also take a set of Small Block 400 heads. The 350 ran when I drove it home and pulled it out. That was 5 years ago. Been stored in a garage since that time. If you feel like giving me something for it go ahead, but I don't really care. Just trying to help someone else out with something I don't need. Shoot me an email: scootergmc@yahoo.com

01-30-2005, 01:39 AM	#7
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,630	I have a complete 305 chevy long block you can have if you come pick it up in Grasss Valley

01-30-2005, 01:53 AM	#8
zooza Registered User Join Date: Jul 2004 Location: LINDEN, TN. Posts: 260	good luck with your classes , I'm an industrial machinist with a lot of school and no on the job experience. ( couldnt take the cut in pay for changing jobs) But i've found my calling in law enforcement. Enjoy those classes! we're all pullin' for ya!

01-30-2005, 11:53 AM	#11
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	any pictures?

01-30-2005, 04:50 PM	#12
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	Hey Jeremy 5: I posted an ad here in the classifieds so let me know asap if you want them.

01-30-2005, 05:22 PM	#13
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	First off I want to thank everyone for the responses, I really appreciate you guys trying to help me out. Brit: I wish I would have known when I came down to Texas too, but we weren't suppose to need an engine for this class, they were suposse to be supplied, but I guess the plans changed bigjimzlll: I would love that little 283, I wish you weren't so far away. I would come and get it but I need the engine by this week. scootergmc: I am sending you a pm about the engine. Thanks to everyone for the offers!!! __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20

01-30-2005, 05:39 PM	#14
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	heres a free one in cali http://67-72chevytrucks.com/vboard/s....php3?t=138384

01-30-2005, 05:40 PM	#15
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	That's me. Jeremy 5, you have your reply. Email me.

01-30-2005, 06:01 PM	#16
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	Hey Jeremy: I have a guy right behind you. If I don't hear from you by 2:30pm, this guy gets it all. I PM'd you my cell. I'll PM again.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.