86 4 door cab and Frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

soulman67 · 01-30-2005, 10:41 PM

I have a 86 4 door Chevy Cab on an 3/4 ton longbed frame. I bought it for the frame for another crewcab but sold the other truck so now I don't need it. The Frame is in great shape the cab is in good condition, with little rust on the front passenger side floor pan. I do have some fair front doors and rough back doors for it, if wanted. I'll take a $100.00 for the cab and Frame, I does not have a tittle. At the moment it is missing a drum off the rear axel. I will have another on it so it will be rolling can get pics if wanted.

Oh the frame is setup for a 454 and still has the bellhousing and granny 4 speed and driveshaft. With a locker rear 3.73 ration acorrding to the glovebox. But who knows if it still is.

rolnlow · 01-31-2005, 07:28 AM

I could be interested, have any pics of it?

edman87 · 01-31-2005, 07:32 AM

I might be interesred too, where is pearsell(sp)? pics?

soulman67 · 01-31-2005, 01:36 PM

Pearsall is about 50 miles south of San Antonio Texas, the cab and frame is located about 17 miles south of Pearsall, where I store my old parts cars.

I will get some pics of the cab and frame as soon as it stops raining down here.

soulman67 · 02-02-2005, 08:32 PM

Here as some pics they arn't very good the grass has grown up pretty high.

01-30-2005, 10:41 PM	#1
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	86 4 door cab and Frame I have a 86 4 door Chevy Cab on an 3/4 ton longbed frame. I bought it for the frame for another crewcab but sold the other truck so now I don't need it. The Frame is in great shape the cab is in good condition, with little rust on the front passenger side floor pan. I do have some fair front doors and rough back doors for it, if wanted. I'll take a $100.00 for the cab and Frame, I does not have a tittle. At the moment it is missing a drum off the rear axel. I will have another on it so it will be rolling can get pics if wanted. Oh the frame is setup for a 454 and still has the bellhousing and granny 4 speed and driveshaft. With a locker rear 3.73 ration acorrding to the glovebox. But who knows if it still is. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

01-31-2005, 07:28 AM	#2
rolnlow Registered User Join Date: Nov 2001 Location: independence mo usa Posts: 333	I could be interested, have any pics of it? __________________ www.krazykustumzkc.com

01-31-2005, 07:32 AM	#3
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	I might be interesred too, where is pearsell(sp)? pics? __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

01-31-2005, 01:36 PM	#4
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	Pearsall is about 50 miles south of San Antonio Texas, the cab and frame is located about 17 miles south of Pearsall, where I store my old parts cars. I will get some pics of the cab and frame as soon as it stops raining down here. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

02-02-2005, 08:32 PM	#5
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	Here as some pics they arn't very good the grass has grown up pretty high. Attached Images __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.