PART#wheel cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevman-67 · 03-04-2005, 06:14 PM

Here is a part # I can not find or cross reference FC-34142 it is a wheel cylinder made by wagner lockheed usa.maye someon can help me out.

Gator70 · 03-06-2005, 02:15 AM

chevman, are you looking for one of those wheel cylinders?? If so what is the appl.

chevman-67 · 03-06-2005, 12:34 PM

This is off a 1 ton dually gmc 1969 w/v-8 I have replaced it but I could not cross reference this part # and the 1 I installed is fine but not an exact match and was wondering if wagner still made these or or they all aftermarket now.I paid $125 .for the 1 I replaced and if I ever need to do this again might be able to find 1 cheaper if I had a cross on the old part #.

Gator70 · 03-07-2005, 12:22 PM

Well chevman, I looked through the Wagner catalouge and could not produce that number, it didnt appear in the superceded #'s. or in the price list.
The numbers that I found for that were different.

The fronts 1 1/8 bore are F34333/F34334
The rears w/HO72 1 1/4 bore F9344/F9345
The rears wH110 1 1/2 bore upper F57851 lower F57850
These are all Wagner part no's
Hope this helps a little bit.
If you get the casting no of the old cyl that might help to get the newer replacement

chevman-67 · 03-07-2005, 04:40 PM

Thanx I do know its a 1 1/4" bore the #s I have are off the rubber end caps off the cylinder ill try and get 1 off the cyl, itself .Thanx again.

Gator70 · 03-08-2005, 12:01 PM

The dust boot(end cap) numbers are not individual to each cylinder. If you know the bores are 11/4 then the F9344/9345 are the cyl you need. I can double check from the casting no of the original cylinder as well.

03-04-2005, 06:14 PM	#1
chevman-67 Registered User Join Date: Jul 2004 Location: quebec canada Posts: 135	PART#wheel cylinder Here is a part # I can not find or cross reference FC-34142 it is a wheel cylinder made by wagner lockheed usa.maye someon can help me out. __________________ gm's are #1 1967 chevrolet short step 1988 chev 4x4 1/2 ton 1989 gmc 1/2 ton 1991 chev 1/2 ton 4x4 1993 Jeep grand cherokee 4x4 And yes a 94 Ford Mustang.

03-06-2005, 02:15 AM	#2
Gator70 Registered User Join Date: Oct 2004 Location: Turner Valley, Alberta Posts: 91	chevman, are you looking for one of those wheel cylinders?? If so what is the appl. __________________ 1970 GMC K15 - Canadian built 2nd Owner truck 68k miles 2014 Denali 1500 6.2L

03-06-2005, 12:34 PM	#3
chevman-67 Registered User Join Date: Jul 2004 Location: quebec canada Posts: 135	This is off a 1 ton dually gmc 1969 w/v-8 I have replaced it but I could not cross reference this part # and the 1 I installed is fine but not an exact match and was wondering if wagner still made these or or they all aftermarket now.I paid $125 .for the 1 I replaced and if I ever need to do this again might be able to find 1 cheaper if I had a cross on the old part #. __________________ gm's are #1 1967 chevrolet short step 1988 chev 4x4 1/2 ton 1989 gmc 1/2 ton 1991 chev 1/2 ton 4x4 1993 Jeep grand cherokee 4x4 And yes a 94 Ford Mustang.

03-07-2005, 12:22 PM	#4
Gator70 Registered User Join Date: Oct 2004 Location: Turner Valley, Alberta Posts: 91	Well chevman, I looked through the Wagner catalouge and could not produce that number, it didnt appear in the superceded #'s. or in the price list. The numbers that I found for that were different. The fronts 1 1/8 bore are F34333/F34334 The rears w/HO72 1 1/4 bore F9344/F9345 The rears wH110 1 1/2 bore upper F57851 lower F57850 These are all Wagner part no's Hope this helps a little bit. If you get the casting no of the old cyl that might help to get the newer replacement __________________ 1970 GMC K15 - Canadian built 2nd Owner truck 68k miles 2014 Denali 1500 6.2L

03-07-2005, 04:40 PM	#5
chevman-67 Registered User Join Date: Jul 2004 Location: quebec canada Posts: 135	Thanx I do know its a 1 1/4" bore the #s I have are off the rubber end caps off the cylinder ill try and get 1 off the cyl, itself .Thanx again. __________________ gm's are #1 1967 chevrolet short step 1988 chev 4x4 1/2 ton 1989 gmc 1/2 ton 1991 chev 1/2 ton 4x4 1993 Jeep grand cherokee 4x4 And yes a 94 Ford Mustang.

03-08-2005, 12:01 PM	#6
Gator70 Registered User Join Date: Oct 2004 Location: Turner Valley, Alberta Posts: 91	The dust boot(end cap) numbers are not individual to each cylinder. If you know the bores are 11/4 then the F9344/9345 are the cyl you need. I can double check from the casting no of the original cylinder as well. __________________ 1970 GMC K15 - Canadian built 2nd Owner truck 68k miles 2014 Denali 1500 6.2L

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.