Heater cable question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

john_doe · 03-09-2005, 12:07 AM

Hi, I know this is a simple question but it's driving me crazy. I replaced the heater control unit (non-ac) but when I tried to run the center heater cable from the control unit it wouldn't clear the heater blower hose next to the heater control unit. I just need to know how it's run so I can hook it up. I didn't want to kink the cable trying to force it passed the hose. Thanks

**pjmoreland** · 03-09-2005, 12:21 AM

The one on my truck goes around the hose on the side farthest from the engine, while the other two go around the side closest to the engine. It's pretty snug, but it's even worse if you try to go the other way.

john_doe · 03-09-2005, 09:33 AM

Thanks, I'll give it a try.

03-09-2005, 12:07 AM	#1
john_doe Registered User Join Date: Sep 2004 Location: Western New York Posts: 37	Heater cable question Hi, I know this is a simple question but it's driving me crazy. I replaced the heater control unit (non-ac) but when I tried to run the center heater cable from the control unit it wouldn't clear the heater blower hose next to the heater control unit. I just need to know how it's run so I can hook it up. I didn't want to kink the cable trying to force it passed the hose. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-09-2005, 12:21 AM	#2
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,791	The one on my truck goes around the hose on the side farthest from the engine, while the other two go around the side closest to the engine. It's pretty snug, but it's even worse if you try to go the other way.

03-09-2005, 09:33 AM	#3
john_doe Registered User Join Date: Sep 2004 Location: Western New York Posts: 37	Thanks, I'll give it a try.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.