07-22-2002, 09:55 PM | #1 |
Thats just prime!
Join Date: Mar 2002
Location: TEXAS
Posts: 720
|
Rain channel question
The rain channels on my truck are pretty much gone and left rust streaks. How do i replace them, meaning are they reproduced or are they like a caulking material? I am talking about the stuff inside the gutter, you know the the metal strip inside the channel. My cab is not totally rusted through but showing signs that it is not too far from it. How do I prevent it? thanks
__________________
*69 GMC short bed stepside with a wimpy six that can barely pull itself. *99 Chevrolet Camaro Z-28 1 Bad 5.7ltr LS1 |
07-22-2002, 10:31 PM | #2 |
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
After you clean out the rust, try using 3M Drip Check Sealer.
Kenneth
__________________
|
07-23-2002, 04:23 PM | #3 |
Keepin' It Stock
Join Date: Aug 2001
Location: Grand Island, Nebraska, USA
Posts: 554
|
Pumkin, do a search on the board for "drip rail". I did and there are a ton of past posts with lots of info on drip rail sealers and how to remove old sealer.
__________________
72 Sierra Grande - Maych Forget about "do it right the first time". Do it wrong the first time to learn how, then do it right the second time. |
07-24-2002, 03:44 PM | #4 |
Thats just prime!
Join Date: Mar 2002
Location: TEXAS
Posts: 720
|
Cool, thanks guys
__________________
*69 GMC short bed stepside with a wimpy six that can barely pull itself. *99 Chevrolet Camaro Z-28 1 Bad 5.7ltr LS1 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|