what did you guys get done. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alexis · 03-13-2005, 11:00 PM

I had to help the aunt clear out a tree.............I'm using her garage so it's not like I can stand by and watch her struggle. So i had to give up a couple of hours to her

I got the floor support in, the kick panel in, the floor tac welded in.

I'll have it done by the middle of this week but it was a productive weekend and after seeing the floor in there I was happy.

JBstor · 03-13-2005, 11:16 PM

I finally got all the bugs out on the engine. Purrs like a kitten now! 20" of vaccum steady!

Discovered a crack in the top rad outlet

Installed the Z bar and fabbed the adjuster rod. Clutch works well!

Picked up a flapper wheel for the grinder and tried it out a little. I highly recommend these to EVERYONE doing metal work WOW!

Sat and revved the engine in the shop for an inordinate amount of time!

JB

FRENCHBLUE72 · 03-14-2005, 12:56 AM

I cleaned up the yard and trucks and got all my truck part's sorted and put in boxes with labels on them so I can get my azz in gear and get all these parts I have been hoarding installed...

krue · 03-14-2005, 01:16 AM

Worked, my next day off is next Sunday, then it's back to work Monday. Oh well, somebody's gotta pay the bills.

redz 1970 K5 · 03-14-2005, 03:39 AM

Didn't get the Blazer out of the garage yet... Finished the truck- put RH front side together, bled the brakes, tires ready to bolt on, but didn't get the carb on yet. Will definitely come out tomorrow after work. Note to self- no more truck projects for a while after this one. I am pretty worn out and wishing just 1 of my neighbors was a gearhead and could help turn a wrench. All of this work alone has really really tired me out. After I install the winch bumper, that's it for a while.

Bought a minivan... 05 Nissan Quest for the wife. I actually really like it. If I need a shot of testosterone and/or adrenaline, I just drive the old K5. I am secure enough in my manhood to accept it. Plus the wife and kids love it, so I am really happy.

*Gee_Emm* · 03-14-2005, 10:17 AM

I finished up a batch of zinc plating and started to patch my patch

so I can patch my bedside. Whoo hoo last one

BigDave · 03-14-2005, 10:58 AM

Earlier in the week I received a nice chrome rear dress bumper from Early Classic Enterpises. It's to replace the old, white, pitted, faded tounge styler bumper. I then removed the frame attached receiver style hitch from the Blazer and installed both the hitch and the new bumper on the Cheyenne. It looks much better now.

Sunday was spent servicing and then working in the yard with my lawn tractor for the first cutting of the season. The allergies are kick'n it overtime this morning.

71jimmy · 03-14-2005, 12:59 PM

Gee Emm, your parts look great, how do you go about zinc plating your parts? Do you have some sort of setup at home or do you send them out to a service?

Bluegoose972 · 03-14-2005, 06:06 PM

Hooked up the hoses on the radiator.
Installed the vacuum lines from the manifold to the transmission and power brakes.
Installed the proportioning valve for the rear disc brakes.
Worked on the throttle linkage and the kickdown linkage for the transmission.
Installed wiring loom on wires coming off of the electric fans.

Overall, a very productive Sunday!

*Gee_Emm* · 03-14-2005, 07:33 PM

Quote:

Originally Posted by 71jimmy

Gee Emm, your parts look great, how do you go about zinc plating your parts? Do you have some sort of setup at home or do you send them out to a service?

Did them myself, I use the eastwood plating kit. I will be making a review post of the whole system in the next little while.

**raggedjim** · 03-15-2005, 09:15 AM

I reworked my hood latch (combination of powder coating, black oxide from Eastwood, and spray paint for yellow springs). I used a 3/8" clevis pin to replace the old pin.

I also welded on my radiator support, I still need to sandblast it. I used some new 16 gage metal and the corner from another support (don't worry it was hit on the drivers side....) Found out that I need a fire extinguisher in my garage... Don't ask

The black oxide worked great looks like I need to try the zinc process...

71jimmy · 03-15-2005, 01:20 PM

Hood latch looks great. I have to do same repair on my rad support, yours came out very nice.

**raggedjim** · 03-15-2005, 01:36 PM

71jimmy, hey, I'm no bodies welder... The surround is a 68 chevy but I'm going to jimmyize it for the 70 jimmy I have.

If I had to do it over I think I would have replaced more of it, welding will show you where the metal is thin by blowing a hole in there for you...

Good luck, Rg

03-13-2005, 11:00 PM	#1
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	what did you guys get done. I had to help the aunt clear out a tree.............I'm using her garage so it's not like I can stand by and watch her struggle. So i had to give up a couple of hours to her I got the floor support in, the kick panel in, the floor tac welded in. I'll have it done by the middle of this week but it was a productive weekend and after seeing the floor in there I was happy.

03-14-2005, 12:56 AM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I cleaned up the yard and trucks and got all my truck part's sorted and put in boxes with labels on them so I can get my azz in gear and get all these parts I have been hoarding installed... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-14-2005, 01:16 AM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Worked, my next day off is next Sunday, then it's back to work Monday. Oh well, somebody's gotta pay the bills. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-14-2005, 03:39 AM	#5
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	Didn't get the Blazer out of the garage yet... Finished the truck- put RH front side together, bled the brakes, tires ready to bolt on, but didn't get the carb on yet. Will definitely come out tomorrow after work. Note to self- no more truck projects for a while after this one. I am pretty worn out and wishing just 1 of my neighbors was a gearhead and could help turn a wrench. All of this work alone has really really tired me out. After I install the winch bumper, that's it for a while. Bought a minivan... 05 Nissan Quest for the wife. I actually really like it. If I need a shot of testosterone and/or adrenaline, I just drive the old K5. I am secure enough in my manhood to accept it. Plus the wife and kids love it, so I am really happy. __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more

03-14-2005, 10:58 AM	#7
BigDave I poop on Ford! Join Date: Apr 2002 Location: Houston Area Posts: 295	Earlier in the week I received a nice chrome rear dress bumper from Early Classic Enterpises. It's to replace the old, white, pitted, faded tounge styler bumper. I then removed the frame attached receiver style hitch from the Blazer and installed both the hitch and the new bumper on the Cheyenne. It looks much better now. Sunday was spent servicing and then working in the yard with my lawn tractor for the first cutting of the season. The allergies are kick'n it overtime this morning. __________________ 1972 Chevy Cheyenne - LWB, factory 402BB 2005 Chevy Suburban LT 2006 Chrysler 300C - SRT8

03-13-2005, 11:16 PM	#2
JBstor Registered User Join Date: Feb 2005 Location: Winnipeg, Manitoba, Canada Posts: 66	I finally got all the bugs out on the engine. Purrs like a kitten now! 20" of vaccum steady! Discovered a crack in the top rad outlet Installed the Z bar and fabbed the adjuster rod. Clutch works well! Picked up a flapper wheel for the grinder and tried it out a little. I highly recommend these to EVERYONE doing metal work WOW! Sat and revved the engine in the shop for an inordinate amount of time! JB

03-14-2005, 10:17 AM	#6
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	I finished up a batch of zinc plating and started to patch my patch so I can patch my bedside. Whoo hoo last one

03-14-2005, 12:59 PM	#8
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	Gee Emm, your parts look great, how do you go about zinc plating your parts? Do you have some sort of setup at home or do you send them out to a service? __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

03-14-2005, 06:06 PM	#9
Bluegoose972 Registered User Join Date: Apr 2003 Location: Lubbock, Texas Posts: 248	Hooked up the hoses on the radiator. Installed the vacuum lines from the manifold to the transmission and power brakes. Installed the proportioning valve for the rear disc brakes. Worked on the throttle linkage and the kickdown linkage for the transmission. Installed wiring loom on wires coming off of the electric fans. Overall, a very productive Sunday!

03-15-2005, 09:15 AM	#11
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,476	I reworked my hood latch (combination of powder coating, black oxide from Eastwood, and spray paint for yellow springs). I used a 3/8" clevis pin to replace the old pin. I also welded on my radiator support, I still need to sandblast it. I used some new 16 gage metal and the corner from another support (don't worry it was hit on the drivers side....) Found out that I need a fire extinguisher in my garage... Don't ask The black oxide worked great looks like I need to try the zinc process... __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Last edited by raggedjim; 10-21-2009 at 03:20 PM.

03-15-2005, 01:20 PM	#12
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	Hood latch looks great. I have to do same repair on my rad support, yours came out very nice. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

03-15-2005, 01:36 PM	#13
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,476	71jimmy, hey, I'm no bodies welder... The surround is a 68 chevy but I'm going to jimmyize it for the 70 jimmy I have. If I had to do it over I think I would have replaced more of it, welding will show you where the metal is thin by blowing a hole in there for you... Good luck, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.