Need bolts for door hinges........... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brad69C-10 · 07-23-2002, 10:56 PM

My bolts that held my hinges to the cab and the doors were in pretty bad shape............does anybody have these bolts or sell them new? Thanks

Benrs86 · 07-23-2002, 11:02 PM

i thought they were just regular bolts??

brad69C-10 · 07-23-2002, 11:06 PM

could very well be....just wanted to make sure they weren't something special I guess.........cool........Thanks

Benrs86 · 07-23-2002, 11:34 PM

oh, well im not sure they are, but most likely. i just put my original ones back, but if i were you i would just get some stainless steel hex head bolts and maybe washers? i dont see why a regular bolt wouldnt work? i dont know. good luck, Ben

*Shane* · 07-23-2002, 11:53 PM

not sure of size...but they are Fine Threads....

crazy longhorn · 07-24-2002, 12:05 AM

They are 3/8 24 NF ,& have a flatwasher . hardware store stuff will be a little different on the head,but usable(unless doing a correct resto).........Al

JimKshortstep4x4 · 07-24-2002, 07:33 AM

I would suggest that you try to pick up the regular hinge bolts. Someone on the board should have a set. The bolts have large thick washers that are cupped to bite into the hinge to prevent movement of the hinges. Since stainless has a tendacy to stretch,
it may create a problem of having to constantly retighten the fasteners.

Jim

07-23-2002, 10:56 PM	#1
brad69C-10 Registered User Join Date: Jul 2002 Location: Ky. Posts: 35	Need bolts for door hinges........... My bolts that held my hinges to the cab and the doors were in pretty bad shape............does anybody have these bolts or sell them new? Thanks __________________ 69 C-10 Pro Street...........red on black...........big block and a lot of go fast stuff under the hood Still in progress ...........

07-23-2002, 11:02 PM	#2
Benrs86 Registered User Join Date: Feb 2000 Location: Brandon, SD, USA Posts: 1,292	i thought they were just regular bolts?? __________________ Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04

07-23-2002, 11:06 PM	#3
brad69C-10 Registered User Join Date: Jul 2002 Location: Ky. Posts: 35	could very well be....just wanted to make sure they weren't something special I guess.........cool........Thanks __________________ 69 C-10 Pro Street...........red on black...........big block and a lot of go fast stuff under the hood Still in progress ...........

07-23-2002, 11:34 PM	#4
Benrs86 Registered User Join Date: Feb 2000 Location: Brandon, SD, USA Posts: 1,292	oh, well im not sure they are, but most likely. i just put my original ones back, but if i were you i would just get some stainless steel hex head bolts and maybe washers? i dont see why a regular bolt wouldnt work? i dont know. good luck, Ben __________________ Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-23-2002, 11:53 PM	#5
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	not sure of size...but they are Fine Threads....

07-24-2002, 12:05 AM	#6
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	They are 3/8 24 NF ,& have a flatwasher . hardware store stuff will be a little different on the head,but usable(unless doing a correct resto).........Al

07-24-2002, 07:33 AM	#7
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I would suggest that you try to pick up the regular hinge bolts. Someone on the board should have a set. The bolts have large thick washers that are cupped to bite into the hinge to prevent movement of the hinges. Since stainless has a tendacy to stretch, it may create a problem of having to constantly retighten the fasteners. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.