03-31-2005, 08:51 PM | #1 |
Active Member
Join Date: Mar 2005
Location: Stoughton, WI
Posts: 187
|
Need '86 Q-Jet specs
When I bought my '86 K10 last year the 305 was topped by an M4ME Q-Jet from an '85 262 V-6 (C10 IIRC). It has #50 primary rods and #74 primary jets, and I can't remember offhand what the secondary rods are.
It still has the '85 Q-Jet and I'd love to check it for correctness; are there any '86 owners here with these specs? My Haynes and Chilton books don't go into this kind of detail and since the truck appears to be stock I'd like to know if I need to make any metering adjustments. Thanks! Brad |
04-02-2005, 08:43 PM | #2 |
Project 2 Resume
Join Date: May 2004
Location: Jim Thorpe, PA
Posts: 884
|
not sure what your carb would call for. i have some paper work only up to around 80-81. the hanger and secondary rods come out pretty easily by removing the 1 small hanger screw. then you can check the letter codes of each for specs.
__________________
John 1984 C30 Chevy Crew Cab Dually 1998 Jeep Cherokee 4x4 2004 Chevy Trailblazer 4x4 (wife's) 1970 Mustang FB fully tubed (getting 521 BBF & powerglide) 1978 Nova 2dr (going BBCaddy & S.P. th400) 1984 Monte SS (circle track car) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|