HELP! Need Saginaw 3 spd part!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TP from Cntl PA · 04-13-2005, 08:47 PM

Does anyone have an imput shaft out there for a saginaw 3spd. I have extra's, but I need one for a piece of equipment I made years ago and it has to have one a diameter of .885" between the splines for the clutch and the trans case ball bearing for a carrier bearing setup I made then. If anyone has one give me a shout, PLEASE!

Thanks,
TP

Harold Shepard · 04-13-2005, 09:44 PM

I have a three speed I took out of a 69 1/2 ton, it has the input shaft -the retainer is already gone- tell me what I need to get out and I will be happy to trade or sell you the thing. Just let me know. Harold

stelth2002 · 04-13-2005, 09:46 PM

I have a three speed that might be right. Its a 10 spline with 7 bolts on the cover and 21 inches long. That the right one?

TP from Cntl PA · 04-14-2005, 06:35 AM

I'll take a picture when I get home this afternoon of what it looks like.

Thanks guys,
It is appreciated!

51 68CHEVY · 04-14-2005, 08:21 PM

I Have One From A 1971 3/4 Ton P.u. It Had A 307 3 Spd Trans. A'm Located In N.j Atco By The Dragstrip.

TP from Cntl PA · 04-14-2005, 09:33 PM

Here is what is left of it...........I bent the out put shaft on it. Then tried to re-weld it together after facing the parts on the Lathe(Hillbilly engineer)..........In total failure

I need just this part, which is all one piece. I'd like to have the area between the cut and the splines where the clutch would mount .885" in diameter as I have a sleeve that splits in half for a carrier bearing I machined, but as with anything else, will take what you have so if you have one let me know the price. Like I said, it would be nice to have one .885" in diameter, but..........

Yell on this thread and I'll contact you through email.

Thanks
TP

67ChevyC10Stepside · 04-14-2005, 09:44 PM

i have a 3 speed here in pa....you can have the whole trans cheap...

TP from Cntl PA · 04-14-2005, 10:02 PM

Would you just want to put that piece out of it and sell me it? I really don't need anymore parts laying around. I have 4 of everything else for a saginaw except the one I need

67ChevyC10Stepside · 04-14-2005, 11:20 PM

lol....probably...get me a pic of what you need.....are all the 3 speeds for these trucks saginaws? make sure i have the right thing first.

67ChevyC10Stepside · 04-14-2005, 11:20 PM

also how much you payin?

TP from Cntl PA · 04-15-2005, 07:05 AM

I don't know what it is worth? What the value to you?

I'll get you a picture of the Case tonight, I'd imagine they all use that same imput shaft.

TP from Cntl PA · 04-16-2005, 07:07 PM

TTT

Someone MUST have one?????????????

67ChevyC10Stepside · 04-16-2005, 07:58 PM

i need a picture.....

stelth2002 · 04-16-2005, 09:00 PM

No, not all 3 speeds are the same in these trucks. There are 2 or 3 different ones. I believe you can identify them by the bolts on the side cover. I have the tranny that has 7 bolts on the cover.

JT

stan79chevy · 04-16-2005, 10:46 PM

its out of a 77 3/4 ton 4x4. if that is the right kind ill get the part out of there that need in trade for a np205 tourqe mount.

67ChevyC10Stepside · 04-18-2005, 01:05 AM

are you going to show me what you need?

04-13-2005, 08:47 PM	#1
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	HELP! Need Saginaw 3 spd part!!! Does anyone have an imput shaft out there for a saginaw 3spd. I have extra's, but I need one for a piece of equipment I made years ago and it has to have one a diameter of .885" between the splines for the clutch and the trans case ball bearing for a carrier bearing setup I made then. If anyone has one give me a shout, PLEASE! Thanks, TP __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

04-13-2005, 09:46 PM	#3
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I have a three speed that might be right. Its a 10 spline with 7 bolts on the cover and 21 inches long. That the right one? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

04-14-2005, 06:35 AM	#4
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	I'll take a picture when I get home this afternoon of what it looks like. Thanks guys, It is appreciated! __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

04-14-2005, 09:33 PM	#6
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	Here is what is left of it...........I bent the out put shaft on it. Then tried to re-weld it together after facing the parts on the Lathe(Hillbilly engineer)..........In total failure I need just this part, which is all one piece. I'd like to have the area between the cut and the splines where the clutch would mount .885" in diameter as I have a sleeve that splits in half for a carrier bearing I machined, but as with anything else, will take what you have so if you have one let me know the price. Like I said, it would be nice to have one .885" in diameter, but.......... Yell on this thread and I'll contact you through email. Thanks TP __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!! Last edited by TP from Cntl PA; 04-14-2005 at 09:39 PM.

04-14-2005, 09:44 PM	#7
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i have a 3 speed here in pa....you can have the whole trans cheap... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-13-2005, 09:44 PM	#2
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	I have a three speed I took out of a 69 1/2 ton, it has the input shaft -the retainer is already gone- tell me what I need to get out and I will be happy to trade or sell you the thing. Just let me know. Harold

04-14-2005, 08:21 PM	#5
51 68CHEVY Registered User Join Date: Feb 2005 Location: ATCO N.J. Posts: 536	I Have One From A 1971 3/4 Ton P.u. It Had A 307 3 Spd Trans. A'm Located In N.j Atco By The Dragstrip.

04-14-2005, 10:02 PM	#8
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	Would you just want to put that piece out of it and sell me it? I really don't need anymore parts laying around. I have 4 of everything else for a saginaw except the one I need __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

04-14-2005, 11:20 PM	#9
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	lol....probably...get me a pic of what you need.....are all the 3 speeds for these trucks saginaws? make sure i have the right thing first. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-14-2005, 11:20 PM	#10
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	also how much you payin? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-15-2005, 07:05 AM	#11
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	I don't know what it is worth? What the value to you? I'll get you a picture of the Case tonight, I'd imagine they all use that same imput shaft. __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

04-16-2005, 07:07 PM	#12
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	TTT Someone MUST have one????????????? __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

04-16-2005, 07:58 PM	#13
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i need a picture..... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-16-2005, 09:00 PM	#14
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	No, not all 3 speeds are the same in these trucks. There are 2 or 3 different ones. I believe you can identify them by the bolts on the side cover. I have the tranny that has 7 bolts on the cover. JT __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

04-16-2005, 10:46 PM	#15
stan79chevy Registered User Join Date: Sep 2003 Location: COVINGTON GEORGIA Posts: 477	i have a 3 speed trans its out of a 77 3/4 ton 4x4. if that is the right kind ill get the part out of there that need in trade for a np205 tourqe mount. __________________ 79 chevy k20 350/350/205/D44/14bFF 4.56 gears rock LWB pimer black 01 S-10 ZR2 extended cab 4.3/4L60E/233 3.73 gear 31" DICK CEPEK CRUSHERS



Register or Log In To remove these advertisements.

04-18-2005, 01:05 AM	#16
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	are you going to show me what you need? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.