Saginaw 3 Speed drainplug help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68haywagon · 04-24-2005, 02:51 PM

I'm out today changing fluids and I finally get to the transmission and I can not find the drainplug

. There is one plug about halfway up on the right side which I know is the fill. I have search google and this site tryin to find it without any help. A few pictures I found show the plug on the left side toward the front but mine just has a flat spot in the case. I have went over the thing very closely and can't seem to find anything. I de-sludged the case and still nothing

. Did GM make them without plugs?

Any help will be appreciated.

Thanks,
Mike

*Tanker350* · 04-24-2005, 03:45 PM

Its the very bottom bolt thats towards the back of the tail-housing. It doesnt look like a drain bolt but it is. I can get you a pic if you need it...

TruckinDaddy · 04-24-2005, 04:04 PM

I don't know about 68haywagon, but I would really appreciate it if you would post a pic of the 3 speed tranny drain plug. I will have to deal with this same issue soon enough.

Thanks

68haywagon · 04-24-2005, 04:24 PM

I would appreciated if you can post it.

Thanks,
Mike

68haywagon · 04-25-2005, 03:57 PM

ttt

68haywagon · 04-27-2005, 12:10 AM

ttt

TruckinDaddy · 04-28-2005, 08:13 AM

68haywagon,

What fluid are you going to use in the 3 speed tranny? I have heard some guys talk about ATF or a heavy motor oil. I am not sure what I would use, yet.

By the way, I noticed on your profile picture that your truck has no rearview mirror. My truck never had one installed. I think it is a pretty quirky thing about 68. Yours either, it looks like.

68haywagon · 04-28-2005, 10:16 AM

I was going to use 80-90w for it because thats what my manual says to use. I believe there is ATF in it now because there is a leak and the fluid is red

. But since I can't find the plug to empty it, I might just top it off with ATF so I don't mix the oils.

If I can empty it I will replace with the 80-90W. I don't see how ATF can hurt it though, I believe newer cars use it in the trans now.

My rearview mirror was the windshield glue type. It was in the glove box when I bought it. I glued it back up. I don't think it was original though. I have some rv mirror option (4B298F) or something like that. I can't read the description. But with that option I don't believe you got a in cab mirror. I notied you dont have the same exterior mirrors I do though. I guess GM is just didn't like people to look at the F**ds behind them

.

I'm heading home again this weekend, so I will let you know the outcome with the trans.

Mike

TruckinDaddy · 04-28-2005, 03:17 PM

Not sure, but I bet your outside mirror(s) are the listed optional equipment. I am pretty sure the round ones like mine were the basic equipment. Mine had one on each door, but the pass side has broken and I have removed the arm for now. So I really can't see any F@rds creeping up behind me!

If your rearview were standard, it should be screwed to the cab ceiling, between the visors.

68haywagon · 04-28-2005, 04:24 PM

Yea the outsides ones are listed as an option, but with that option I don't thinkt here was a inside mirror- no screw holes in the roof. Thats why I think the inside one is not original, it's glued to the windshield.

Mike

68haywagon · 04-30-2005, 10:26 PM

ttt

68haywagon · 05-08-2005, 11:15 AM

ttt

68haywagon · 05-09-2005, 12:41 PM

Somebody, anybody? I'm heading home next week to do this and tires so I can finally drive it up here.

68haywagon · 05-10-2005, 08:05 AM

ttt

sneakysnake · 05-10-2005, 09:43 AM

Your Q's been answered?
Pull the lower bolts where the tail bolts to the body to drain the oil.
Use 80-90W, ATF or syncromesh is for the newer 5sp with closer tolerances.

04-24-2005, 02:51 PM	#1
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	Saginaw 3 Speed drainplug help I'm out today changing fluids and I finally get to the transmission and I can not find the drainplug . There is one plug about halfway up on the right side which I know is the fill. I have search google and this site tryin to find it without any help. A few pictures I found show the plug on the left side toward the front but mine just has a flat spot in the case. I have went over the thing very closely and can't seem to find anything. I de-sludged the case and still nothing . Did GM make them without plugs? Any help will be appreciated. Thanks, Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

04-24-2005, 04:04 PM	#3
TruckinDaddy What's that funky smell? Join Date: Mar 2005 Location: Austin, TX Posts: 610	I don't know about 68haywagon, but I would really appreciate it if you would post a pic of the 3 speed tranny drain plug. I will have to deal with this same issue soon enough. Thanks __________________ Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page

04-24-2005, 04:24 PM	#4
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	I would appreciated if you can post it. Thanks, Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

04-25-2005, 03:57 PM	#5
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	ttt __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

04-27-2005, 12:10 AM	#6
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	ttt __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

04-24-2005, 03:45 PM	#2
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	Its the very bottom bolt thats towards the back of the tail-housing. It doesnt look like a drain bolt but it is. I can get you a pic if you need it...

04-28-2005, 08:13 AM	#7
TruckinDaddy What's that funky smell? Join Date: Mar 2005 Location: Austin, TX Posts: 610	68haywagon, What fluid are you going to use in the 3 speed tranny? I have heard some guys talk about ATF or a heavy motor oil. I am not sure what I would use, yet. By the way, I noticed on your profile picture that your truck has no rearview mirror. My truck never had one installed. I think it is a pretty quirky thing about 68. Yours either, it looks like. __________________ Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page Last edited by TruckinDaddy; 04-28-2005 at 08:16 AM.

04-28-2005, 10:16 AM	#8
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	I was going to use 80-90w for it because thats what my manual says to use. I believe there is ATF in it now because there is a leak and the fluid is red . But since I can't find the plug to empty it, I might just top it off with ATF so I don't mix the oils. If I can empty it I will replace with the 80-90W. I don't see how ATF can hurt it though, I believe newer cars use it in the trans now. My rearview mirror was the windshield glue type. It was in the glove box when I bought it. I glued it back up. I don't think it was original though. I have some rv mirror option (4B298F) or something like that. I can't read the description. But with that option I don't believe you got a in cab mirror. I notied you dont have the same exterior mirrors I do though. I guess GM is just didn't like people to look at the F*ds behind them . I'm heading home again this weekend, so I will let you know the outcome with the trans. Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold Last edited by 68haywagon; 04-28-2005 at 10:22 AM.*

04-28-2005, 03:17 PM	#9
TruckinDaddy What's that funky smell? Join Date: Mar 2005 Location: Austin, TX Posts: 610	Not sure, but I bet your outside mirror(s) are the listed optional equipment. I am pretty sure the round ones like mine were the basic equipment. Mine had one on each door, but the pass side has broken and I have removed the arm for now. So I really can't see any F@rds creeping up behind me! If your rearview were standard, it should be screwed to the cab ceiling, between the visors. __________________ Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page

04-28-2005, 04:24 PM	#10
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	Yea the outsides ones are listed as an option, but with that option I don't thinkt here was a inside mirror- no screw holes in the roof. Thats why I think the inside one is not original, it's glued to the windshield. Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

04-30-2005, 10:26 PM	#11
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	ttt __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

05-08-2005, 11:15 AM	#12
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	ttt __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

05-09-2005, 12:41 PM	#13
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	Somebody, anybody? I'm heading home next week to do this and tires so I can finally drive it up here. __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

05-10-2005, 08:05 AM	#14
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	ttt __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

05-10-2005, 09:43 AM	#15
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Your Q's been answered? Pull the lower bolts where the tail bolts to the body to drain the oil. Use 80-90W, ATF or syncromesh is for the newer 5sp with closer tolerances.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.