69 grille on 71. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Faster_than_you · 05-01-2005, 07:38 PM

I was wondering if it is possible, o.k. wrong words- you can fabricate anything to make it work.
Is it possible to interchange a 69 chevy's grille directly with a 71 chevy?
thanks

**Hart_Rod** · 05-01-2005, 08:08 PM

I believe it should be a straight swap as long as you are changing both the inner and outer grill.

*Gee_Emm* · 05-01-2005, 08:08 PM

It will bolt right up. You just have to deal with the extra holes in your bumper and you will need a new wiring harness.

Longhorn Man · 05-01-2005, 09:49 PM

The hood release on the 71 72 sticks out a bit more. you'll have to bust out some space in the upper center of the inner grill in order to do this.
The one ton longhorn i have was like this when i got it...71/72 front sheet metal with a 69 grill. I have pics somewhere...

Longhorn Man · 05-01-2005, 09:56 PM

Hwew you go...same front sheet metal (except the hood) placed on my old truck. I had to lighten it quite a bit, but you can see the hood release poking out.

*Randy70C-10* · 05-01-2005, 10:00 PM

It's a direct swap but for it to be a perfect swap you also need the change the grill support and hood latch assembly. I might have a hood latch assembly that you can have, I'll have to look around.

Faster_than_you · 05-04-2005, 07:37 PM

Thanks y'all for the input!

05-01-2005, 07:38 PM	#1
Faster_than_you Registered User Join Date: Mar 2004 Location: Virginia beach, Va Posts: 209	69 grille on 71. I was wondering if it is possible, o.k. wrong words- you can fabricate anything to make it work. Is it possible to interchange a 69 chevy's grille directly with a 71 chevy? thanks __________________ ~Christopher L. Orr 71 c20, 454- Stolen While Deployed. dynoed at 550 ft lbs, 425 hp at 3000 rpm (mustang dyno). TH400 3500 stall.... etc, etc.

05-01-2005, 08:08 PM	#3
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	It will bolt right up. You just have to deal with the extra holes in your bumper and you will need a new wiring harness. Last edited by Gee_Emm; 05-01-2005 at 08:09 PM.

05-01-2005, 09:56 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Hwew you go...same front sheet metal (except the hood) placed on my old truck. I had to lighten it quite a bit, but you can see the hood release poking out. Attached Images

05-04-2005, 07:37 PM	#7
Faster_than_you Registered User Join Date: Mar 2004 Location: Virginia beach, Va Posts: 209	Thanks y'all for the input! __________________ ~Christopher L. Orr 71 c20, 454- Stolen While Deployed. dynoed at 550 ft lbs, 425 hp at 3000 rpm (mustang dyno). TH400 3500 stall.... etc, etc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-01-2005, 08:08 PM	#2
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	I believe it should be a straight swap as long as you are changing both the inner and outer grill.

05-01-2005, 09:49 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	The hood release on the 71 72 sticks out a bit more. you'll have to bust out some space in the upper center of the inner grill in order to do this. The one ton longhorn i have was like this when i got it...71/72 front sheet metal with a 69 grill. I have pics somewhere...

05-01-2005, 10:00 PM	#6
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	It's a direct swap but for it to be a perfect swap you also need the change the grill support and hood latch assembly. I might have a hood latch assembly that you can have, I'll have to look around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.