I know somebody will be interested in these - The 1947 - Present Chevrolet & GMC Truck Message Board Network

biglou55 · 05-08-2005, 08:39 PM

My friend bought a 72 one ton at an estate sale. All he wanted was the 402 Big Block. what he has up for sale is the complete one ton disc front end and the eaton dual wheel rear end. the rear end has a suffix code of G which usually means posi. at least it does now in the present. he wants $ 100. dollars for the complete front end and $200. for the rear end. he will not ship. No time. I have dibs on the other parts. what i don.t use I will probably sell at a later date after i get it stripped. I don.t know what the ratio is.I do believe the four speed tranny is up for sale too. please reply here so i can keep every body in order. Thank.s

vtblazer · 05-09-2005, 06:09 AM

Front disc could find a home here.

Is this the same guy looking for that bell housing?
PM sent.

biglou55 · 05-09-2005, 07:28 AM

Hi Kurt no this is a different friend. I haven,t told him yet that this one has the bell housing that he needs. i will keep you posted. my friend will probably sell the whole thing as a rolling chassis. minus the doors and the power brake booster guage cluster I have dibs on those. I have no use for a one ton setup all he wants is the motor.

vtblazer · 05-09-2005, 07:34 AM

Quote:

Originally Posted by biglou55

my friend will probably sell the whole thing as a rolling chassis. minus the doors and the power brake booster guage cluster I have dibs on those.

all he wants is the motor.

you said the front disc's were for sale on their own, I'm confused here...
Sure, I'll take the rolling chassis for $100.00 bucks.

biglou55 · 05-09-2005, 09:38 AM

yes the front end is one hundred. what

I meant was he doesn.t want the truck he will sell what is left. I know i am probably clouding the issue. but if somebody needs a one ton frame -cab for parts- etc -etc he will sell them. I would hate to see it go to make ricer parts.

**CPNE** · 05-09-2005, 10:12 AM

What's he want for the whole rolling chassis?

biglou55 · 05-09-2005, 01:19 PM

I guess i have put my foot in it. When we discussed it yesterday my friend asked what people would be interested in. I told him the front and rear ends. It was my idea to see if anybody wanted to buy the frame and what is left. I know he will sell it. my problem is i should never had said a rolling chassis. kurt VT blazer wants the front end. And i will abide by the code of conduct of the board the person who asked first gets first dibs. if kurt backs out you are second. I will ask him tonight what he wants for everything that is left. it probably would have been smarter for me to list it as a rolling chassis to begin with. I guess i have a little left to learn. SORRY I will keep you posted.

ME.

vtblazer · 05-09-2005, 07:26 PM

Quote:

Originally Posted by CPNE

What's he want for the whole rolling chassis?

Ditto...how much for it all?
Thanks Lou.

biglou55 · 05-09-2005, 09:25 PM

Kurt in your case it would be $400. including the front end you want. cpne it would be $300.minus the front end kurt wants. the cab needs work in the usual places (rockers-cab corners-drivers floor ) it.s a high hump the front and rear glass are decent. few scratches on the front one I took some pics of it today. I guess it is time to learn how to post pics . I will try tomorrow or throw the comp. out the window from frustration. I think he told me the truck only has 57 thou. original miles on it but don.t quote me on that. the mirror on the doors go with the truck i just want the doors.

86SILVERADO · 05-09-2005, 09:36 PM

Hey Lou,

I would buy the front end if those ahead of me decide not to.

Thanks,

Norris

biglou55 · 05-10-2005, 07:54 AM

86 silverado i will keep you posted . we will see what vt blazer and then cpne want to do first.

**CPNE** · 05-10-2005, 08:41 AM

Next question: Is this a 133" wheelbase or 157" wheelbase 1 ton?

biglou55 · 05-10-2005, 09:32 AM

I will check it for you today

**CPNE** · 05-10-2005, 10:12 AM

While you're checking, can you find out what size tires/rims are on the rear and if they are split rims or not?

Is GVW 10000 lbs?

Thanks

biglou55 · 05-10-2005, 12:43 PM

Will do

**CUSTOM/10** · 05-10-2005, 12:53 PM

I'd be interested in seeing Pic's of the cab and hearing a price on it !!!!!

Gary

biglou55 · 05-10-2005, 09:23 PM

It is 16 inch wheels - split rims -133 inch wheelbase- 9,000 gvw

**CPNE** · 05-10-2005, 09:28 PM

Cool, 133". Kurt, how do you want to proceed?

biglou55 · 05-10-2005, 09:44 PM

Here are some pics i promised

I hope

**CPNE** · 05-10-2005, 10:01 PM

Quote:

Originally Posted by biglou55

Here are some pics i promised

I hope

If you can e-mail them I may be able to post. I'll pm my e-mail address to you

biglou55 · 05-10-2005, 10:05 PM

It wont let me post them it says the file is to big. it says the pic is 640 X480 jpeg. it says it will handle 100 kb it says the pic is 135kb how do i fix it. HELP

**CPNE** · 05-10-2005, 10:20 PM

You can email to me and I'll resize. PM sent

biglou55 · 05-10-2005, 10:53 PM

cpne I think i sent them. I am new to this also. How do you spell computer stupid. i will try again tomorrow. thanks

hotrodmtodd · 05-11-2005, 12:44 AM

Lou,
Please fit my clutch setup pics into your busy schedule if you can brother. Thanks, Hot Rod

vtblazer · 05-11-2005, 06:19 AM

Quote:

Originally Posted by CPNE

Cool, 133". Kurt, how do you want to proceed?

Pics would be great to see. (I know your trying Lou)

What is 'exactly' up for sale here?
A roller minus doors and interior parts? Will the drive train be complete?
Will it include a front clip?
Sorry, Lou just trying to get on the same page...

05-08-2005, 08:39 PM	#1
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	I know somebody will be interested in these My friend bought a 72 one ton at an estate sale. All he wanted was the 402 Big Block. what he has up for sale is the complete one ton disc front end and the eaton dual wheel rear end. the rear end has a suffix code of G which usually means posi. at least it does now in the present. he wants $ 100. dollars for the complete front end and $200. for the rear end. he will not ship. No time. I have dibs on the other parts. what i don.t use I will probably sell at a later date after i get it stripped. I don.t know what the ratio is.I do believe the four speed tranny is up for sale too. please reply here so i can keep every body in order. Thank.s __________________ Certifiably crazy person Last edited by biglou55; 05-08-2005 at 08:41 PM.

05-09-2005, 06:09 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Front disc could find a home here. Is this the same guy looking for that bell housing? PM sent. Last edited by vtblazer; 05-09-2005 at 06:11 AM.

05-09-2005, 07:28 AM	#3
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	Hi Kurt no this is a different friend. I haven,t told him yet that this one has the bell housing that he needs. i will keep you posted. my friend will probably sell the whole thing as a rolling chassis. minus the doors and the power brake booster guage cluster I have dibs on those. I have no use for a one ton setup all he wants is the motor. __________________ Certifiably crazy person Last edited by biglou55; 05-09-2005 at 07:30 AM.

05-09-2005, 09:38 AM	#5
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	yes the front end is one hundred. what I meant was he doesn.t want the truck he will sell what is left. I know i am probably clouding the issue. but if somebody needs a one ton frame -cab for parts- etc -etc he will sell them. I would hate to see it go to make ricer parts. __________________ Certifiably crazy person Last edited by biglou55; 05-09-2005 at 09:46 AM.

05-09-2005, 10:12 AM	#6
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	What's he want for the whole rolling chassis? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

05-09-2005, 01:19 PM	#7
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	I guess i have put my foot in it. When we discussed it yesterday my friend asked what people would be interested in. I told him the front and rear ends. It was my idea to see if anybody wanted to buy the frame and what is left. I know he will sell it. my problem is i should never had said a rolling chassis. kurt VT blazer wants the front end. And i will abide by the code of conduct of the board the person who asked first gets first dibs. if kurt backs out you are second. I will ask him tonight what he wants for everything that is left. it probably would have been smarter for me to list it as a rolling chassis to begin with. I guess i have a little left to learn. SORRY I will keep you posted. ME. __________________ Certifiably crazy person

05-09-2005, 09:25 PM	#9
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	Kurt in your case it would be $400. including the front end you want. cpne it would be $300.minus the front end kurt wants. the cab needs work in the usual places (rockers-cab corners-drivers floor ) it.s a high hump the front and rear glass are decent. few scratches on the front one I took some pics of it today. I guess it is time to learn how to post pics . I will try tomorrow or throw the comp. out the window from frustration. I think he told me the truck only has 57 thou. original miles on it but don.t quote me on that. the mirror on the doors go with the truck i just want the doors. __________________ Certifiably crazy person

05-09-2005, 09:36 PM	#10
86SILVERADO Registered User Join Date: Dec 2002 Location: Hills of Western Mass Posts: 626	Hey Lou, I would buy the front end if those ahead of me decide not to. Thanks, Norris __________________ 86 Silverado C10 back to 305 power! 67 C30 Dually Dump, with 350 transplant, Rockhauler 05 Duramax 3500 "If at first you don't succeed, try a bigger hammer" Member of the 1-Ton club!

05-10-2005, 07:54 AM	#11
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	86 silverado i will keep you posted . we will see what vt blazer and then cpne want to do first. __________________ Certifiably crazy person

05-10-2005, 08:41 AM	#12
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Next question: Is this a 133" wheelbase or 157" wheelbase 1 ton? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

05-10-2005, 09:32 AM	#13
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	I will check it for you today __________________ Certifiably crazy person

05-10-2005, 10:12 AM	#14
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	While you're checking, can you find out what size tires/rims are on the rear and if they are split rims or not? Is GVW 10000 lbs? Thanks __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

05-10-2005, 12:43 PM	#15
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	Will do __________________ Certifiably crazy person

05-10-2005, 12:53 PM	#16
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Cab I'd be interested in seeing Pic's of the cab and hearing a price on it !!!!! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

05-10-2005, 09:23 PM	#17
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	It is 16 inch wheels - split rims -133 inch wheelbase- 9,000 gvw __________________ Certifiably crazy person



Register or Log In To remove these advertisements.

05-10-2005, 09:28 PM	#18
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Cool, 133". Kurt, how do you want to proceed? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

05-10-2005, 09:44 PM	#19
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	Here are some pics i promised I hope __________________ Certifiably crazy person Last edited by biglou55; 05-10-2005 at 09:47 PM.

05-10-2005, 10:05 PM	#21
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	It wont let me post them it says the file is to big. it says the pic is 640 X480 jpeg. it says it will handle 100 kb it says the pic is 135kb how do i fix it. HELP __________________ Certifiably crazy person

05-10-2005, 10:20 PM	#22
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	You can email to me and I'll resize. PM sent __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

05-10-2005, 10:53 PM	#23
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	cpne I think i sent them. I am new to this also. How do you spell computer stupid. i will try again tomorrow. thanks __________________ Certifiably crazy person

05-11-2005, 12:44 AM	#24
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Clutch Setup Pics Lou, Please fit my clutch setup pics into your busy schedule if you can brother. Thanks, Hot Rod

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.