05-15-2005, 02:57 PM | #1 |
student wrench turner
Join Date: Jan 2003
Location: wrightstown, wisconsin
Posts: 192
|
control arm bushings
Is there any place that io can just buy the rubber pieces that i have circled in red?
I have checked all of the local auto parts stores and they only sell them with the shafts.
__________________
1969 Chevy C-10 with 250 L6 2002 GMC Sierra 2500 HD Duramax with banks six gun |
05-15-2005, 03:17 PM | #2 |
Active Member
Join Date: Mar 2005
Location: North Highlands. California
Posts: 449
|
I would like the answer to this question to. Every Site I look at sells the kit . I would think there sould be some place to get just the rubber parts .
__________________
67 short step 71 Custom |
05-16-2005, 11:58 PM | #3 |
student wrench turner
Join Date: Jan 2003
Location: wrightstown, wisconsin
Posts: 192
|
ttt
__________________
1969 Chevy C-10 with 250 L6 2002 GMC Sierra 2500 HD Duramax with banks six gun |
05-17-2005, 12:22 AM | #4 |
An American Soldier
Join Date: Feb 2005
Location: Grumolo D' Abadessee, Italy
Posts: 503
|
Have you tried NAPA? The reason I ask is that I had the NAPA Car Care Center press out my lower ball joints and I asked if they could remove the control arm shaft since I had bought new ones. The manager told me my shaft was fine and I should just by those parts....already bought whole kits, though, so that is what I went with.
__________________
Dan dan.brue@us.army.mil |
05-17-2005, 09:31 AM | #5 |
Registered User
Join Date: Mar 2004
Location: Corinth,TX
Posts: 444
|
LMC sells just the rubber pieces i believe that they are around $4, they also sell the caps seperately if you are need those but not sure on the price.
|
05-18-2005, 12:31 AM | #6 |
student wrench turner
Join Date: Jan 2003
Location: wrightstown, wisconsin
Posts: 192
|
I have alreday tried napa, autozone, and carquest and all of them said they only sell it as a kit.
does anybody have a part number for lmc because i dont have there catalog yet.
__________________
1969 Chevy C-10 with 250 L6 2002 GMC Sierra 2500 HD Duramax with banks six gun Last edited by rustyold69; 05-18-2005 at 12:32 AM. |
05-18-2005, 09:22 PM | #7 |
Active Member
Join Date: Mar 2005
Location: North Highlands. California
Posts: 449
|
I found them in the catolg for the truck shop www.truckandcarshop.com Uppers are #63-14434 lowers are #63-14435
thats for 63-72 1/2 or 3/4 ton $4.00 ea 1-800-243-8947
__________________
67 short step 71 Custom Last edited by MARIOS68PANEL; 05-18-2005 at 09:23 PM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|