How can I lift the front? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nima · 06-25-2005, 11:15 AM

Hi,
Alright, now that I am gona change the front disc, end and suspension I like to level my dropped nose!. From the info you guys gave me, part of it is the design of these trucks and I think part of it could be old shock/springs. Since I like the stock hights or just a little higher I don't want to drop the rear unless I have to therefore I need some advise how to lift the front 1 or 2 in.I was wondering if just taller shoch do the trick. I looked at different catalog and websites, I didn't se anything that i could use. Also for the rear I didn't see any 1 in drop coils, they are 2 or more in which I think is too much for me. It is 3/4 ton, 2w. I don't tow very heavy stuff often. thanks.

**special-K** · 06-25-2005, 02:37 PM

Tell us exactly what you have and we`ll go from there.

Nima · 06-25-2005, 05:56 PM

I have 3/4 ton,2w, 350 engine, 3 on the tree, no ps nor a/c. Coil spring front and back. Coils look pretty old looking and sagging. Front tires are 31 and rear 33 (I guess that is some of the difference). What else? I just want to level the truck without changing the height. Also I have one more question now: is coils are changable between C10 and C20? I know as far as heavy duty stuff they are different but I mean as far as height and diameter. I don't mind to improve the quality of ride. The other hing came to my mind was using 4w coils, aren't they taller? Thanks.

Robert1970C20rstbukt · 06-25-2005, 06:04 PM

You could always use the front coils from a C30 truck, they'll give you about a 1 to 2 inch lift. I have also seen trucks with the twist-in spacers stuck in the coils too, which is easier than changing the springs themselves. You can't lift it too much though, or it will mess up your wheel alignment.

Longhorn Man · 06-25-2005, 06:12 PM

One ton coils is about as good as it'll get.
4 wheel drives had leafs up front.
As far as the coil interchaingability between 10 and 20 series, yes, they swap out no problem.

tmcgrawlookalike · 06-25-2005, 06:50 PM

put some 33`s on front,and some h/d `new`front coils(like from moog,and be sure and ask for heavy duty if offered)with some good shocks like monroe magnums.as for now,leave the rear alone except for maybe some shocks.if still not level,they make a coil spring apparatus that you can either clamp together the coil(lower) or open the coil(raise) to your specification or whatever needs to be done

Nima · 06-25-2005, 07:12 PM

Thanks guys. Who sells moogs?

06-25-2005, 11:15 AM	#1
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	How can I lift the front? Hi, Alright, now that I am gona change the front disc, end and suspension I like to level my dropped nose!. From the info you guys gave me, part of it is the design of these trucks and I think part of it could be old shock/springs. Since I like the stock hights or just a little higher I don't want to drop the rear unless I have to therefore I need some advise how to lift the front 1 or 2 in.I was wondering if just taller shoch do the trick. I looked at different catalog and websites, I didn't se anything that i could use. Also for the rear I didn't see any 1 in drop coils, they are 2 or more in which I think is too much for me. It is 3/4 ton, 2w. I don't tow very heavy stuff often. thanks.

06-25-2005, 02:37 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Tell us exactly what you have and we`ll go from there. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-25-2005, 06:04 PM	#4
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	You could always use the front coils from a C30 truck, they'll give you about a 1 to 2 inch lift. I have also seen trucks with the twist-in spacers stuck in the coils too, which is easier than changing the springs themselves. You can't lift it too much though, or it will mess up your wheel alignment. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck Last edited by Robert1970C20rstbukt; 06-25-2005 at 06:57 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-25-2005, 05:56 PM	#3
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	I have 3/4 ton,2w, 350 engine, 3 on the tree, no ps nor a/c. Coil spring front and back. Coils look pretty old looking and sagging. Front tires are 31 and rear 33 (I guess that is some of the difference). What else? I just want to level the truck without changing the height. Also I have one more question now: is coils are changable between C10 and C20? I know as far as heavy duty stuff they are different but I mean as far as height and diameter. I don't mind to improve the quality of ride. The other hing came to my mind was using 4w coils, aren't they taller? Thanks.

06-25-2005, 06:12 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	One ton coils is about as good as it'll get. 4 wheel drives had leafs up front. As far as the coil interchaingability between 10 and 20 series, yes, they swap out no problem.

06-25-2005, 06:50 PM	#6
tmcgrawlookalike Registered User Join Date: Jun 2004 Location: warr acres,oklahoma Posts: 650	put some 33`s on front,and some h/d `new`front coils(like from moog,and be sure and ask for heavy duty if offered)with some good shocks like monroe magnums.as for now,leave the rear alone except for maybe some shocks.if still not level,they make a coil spring apparatus that you can either clamp together the coil(lower) or open the coil(raise) to your specification or whatever needs to be done

06-25-2005, 07:12 PM	#7
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	Thanks guys. Who sells moogs?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.