|
08-14-2002, 07:32 PM
|
#1 |
|
Project 7dos
Join Date: Aug 2001
Location: Abilene, Texas
Posts: 876
|
Heater Hose Questions
We recently bought a new radiator, it doesent have the heater hose outlet like our old one did. We are wanting to put it in the water pump but dont know which one to put it in we have a top and side outlet, which is the best one?? thanks
__________________
7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290 |
|
|
|
08-14-2002, 07:55 PM
|
#2 |
|
Account Suspended
Join Date: May 2002
Location: Olathe, Kansas
Posts: 929
|
Top and side outlet sounds like a shorty waterpump, in which case it doesnt make a huge difference really. These were designed in according to use. sometimes there is no access to the side or visa versa.
To me, the side is best if you have access to it. It makes for a cleaner install. Going in order of flow: Hose goes from the intake nipple (To the left of the thermostat housing) to the lower pipe of the heater core, upper pipe of the heater core to the nipple on the top of the waterpump. 
Last edited by Zkast; 08-14-2002 at 07:58 PM. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
