Trans Kick Down Cable "Help" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70GMCer · 08-01-2005, 05:57 PM

I've changed my manual trans to a 350 turbo and now I need the kick down bracket to connect it to the intake manifold or carb. Does anyone have a picture of one? It would have to be for a 70 on back due to the rod linkage for the carb, not cable linkage. Where can I locate one?

thanks..........

JimKshortstep4x4 · 08-02-2005, 06:05 AM

I used the bracket from a 71 on my 69 setup, (with an accelerator rod). The brackets are available from GMC Pauls.

I can take a pic later today if you like.

Jim

70c10 · 08-02-2005, 07:11 AM

Steve, have you checked the local junkyards?. I'm pretty sure Pep Boys in White Marsh sells the chrome ones made by spectre for about $8.

mrein3 · 08-02-2005, 07:29 AM

When I had a 2bbl carb on my 4x4 I used the bracket off my 71 Monte that had a 2bbl carb and th350. (I swapped a 3-speed manual for the th350 in the truck).
When I put the 383 in with an Edelbrock carb, I bought Edelbrock's adjustable bracket.

I think any one will work as long as your donor has a similar carb. (4bbl truck = 4bbl donor, 2bbl truck = 2bbl donor)

tphsmith · 08-02-2005, 08:11 AM

I have a stock bracket off a 350 motor its pretty ugly looking, I replaced it with one bought from advanced auto, if you cant get one you can have this one just i ask ya pay for the ride to you

70GMCer · 08-02-2005, 04:58 PM

Need pics.......The ones I've seen at the local auto stores are for a cable accelerator and looks like the acc rod would get in the way.

70c10 (Jim), Haven't had any luck at the local yards. Again, was hoping to see a picture of one. If not, I might try the chrome one you talked about......

thanks all......

70c10 · 08-02-2005, 05:09 PM

Heres a pic of Cobalts truck. He used a Lokar bracket and Lokar cable.

70GMCer · 08-02-2005, 07:05 PM

thanks Jim, that helps.......

JimKshortstep4x4 · 08-02-2005, 08:07 PM

Here is a picture of my setup. The 71 cable bracket is just behind the vacuum line for the brake booster in the stock location.

Jim

mrein3 · 08-03-2005, 07:51 AM

Sorry the pictures are blurry. I don't know how to override the auto focus on my digital camera.

I used an Edelbrock piece to connect the throttle rod to the carb. I also used an Edelbrock kick down cable bracket.

Everything clears just fine.

08-01-2005, 05:57 PM	#1
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Trans Kick Down Cable "Help" I've changed my manual trans to a 350 turbo and now I need the kick down bracket to connect it to the intake manifold or carb. Does anyone have a picture of one? It would have to be for a 70 on back due to the rod linkage for the carb, not cable linkage. Where can I locate one? thanks.......... __________________ 1997 GMC Sierra Ext 1965 Mustang

08-02-2005, 07:11 AM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Steve, have you checked the local junkyards?. I'm pretty sure Pep Boys in White Marsh sells the chrome ones made by spectre for about $8. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-02-2005, 07:29 AM	#4
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,254	When I had a 2bbl carb on my 4x4 I used the bracket off my 71 Monte that had a 2bbl carb and th350. (I swapped a 3-speed manual for the th350 in the truck). When I put the 383 in with an Edelbrock carb, I bought Edelbrock's adjustable bracket. I think any one will work as long as your donor has a similar carb. (4bbl truck = 4bbl donor, 2bbl truck = 2bbl donor) __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

08-02-2005, 08:11 AM	#5
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	I have a stock bracket off a 350 motor its pretty ugly looking, I replaced it with one bought from advanced auto, if you cant get one you can have this one just i ask ya pay for the ride to you __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

08-02-2005, 04:58 PM	#6
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Need pics.......The ones I've seen at the local auto stores are for a cable accelerator and looks like the acc rod would get in the way. 70c10 (Jim), Haven't had any luck at the local yards. Again, was hoping to see a picture of one. If not, I might try the chrome one you talked about...... thanks all...... __________________ 1997 GMC Sierra Ext 1965 Mustang

08-02-2005, 06:05 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I used the bracket from a 71 on my 69 setup, (with an accelerator rod). The brackets are available from GMC Pauls. I can take a pic later today if you like. Jim

08-02-2005, 05:09 PM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Heres a pic of Cobalts truck. He used a Lokar bracket and Lokar cable. Attached Images __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-02-2005, 07:05 PM	#8
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	thanks Jim, that helps....... __________________ 1997 GMC Sierra Ext 1965 Mustang

08-02-2005, 08:07 PM	#9
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Here is a picture of my setup. The 71 cable bracket is just behind the vacuum line for the brake booster in the stock location. Jim Attached Images

08-03-2005, 07:51 AM	#10
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,254	Sorry the pictures are blurry. I don't know how to override the auto focus on my digital camera. I used an Edelbrock piece to connect the throttle rod to the carb. I also used an Edelbrock kick down cable bracket. Everything clears just fine. Attached Images __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.