Anyone have a speed sensor on their speedometer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 08-07-2005, 05:49 PM

And happen to have your dash out of your truck? I need to know the pinout for it, which wire is for power, which is for ground, and which is for the signal wire. I unpinned mine, and forgot to take note of which wire went where.

Thanks!

Russell

**Captkaos** · 08-08-2005, 04:24 PM

Russell, I will be in the garage tonight. shoot me an email at webmaster@73-87chevytrucks.com and remind me to look before I go out. I think mine is still together. BTW, I just got a line on the 749 computer for my TPI.

Russell · 08-08-2005, 07:10 PM

Thank you Chris!

Email is away

Russell · 08-08-2005, 10:02 PM

Here is a pic of what I am needing. I'm pretty sure which are the VSS outputs, but I have no clue which pole is positive, and which pole is negative...

**Captkaos** · 08-08-2005, 11:32 PM

Ok, here is what I have. I am looking this up right now. I couldn't find the plug on my spare harness, so I just checked out the '87.

**Captkaos** · 08-09-2005, 12:05 AM

Ok, far right on your pic is positive, then to the left is ground from what I found.

Russell · 08-09-2005, 12:09 AM

That pic is all I needed

Positive on the far right in my pic, ground in the center, and vss output on the left

Thanks Chris! Now I just gotta pin that, and finish installing my headlight relay

Then the rest of my dash can be put back together

**Captkaos** · 08-09-2005, 12:12 AM

No problem. Glad to help out. I am going to have to figure this stuff out soon also. Send me some more pics of what you have going on. I need some motivation for the Jimmy. I hopefully will get the intake vatted this week.

Russell · 08-09-2005, 12:16 AM

Hehe, I can load you right up with pics

Just gimme your email address and I'll send a whole lotta em!

Russell · 08-09-2005, 12:31 AM

That'd be your tired eyes, lol

Though, that did get me to look again, lol

**Captkaos** · 08-09-2005, 01:18 PM

Well, you can send them to the webmaster account. Hit me up!

08-07-2005, 05:49 PM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Anyone have a speed sensor on their speedometer? And happen to have your dash out of your truck? I need to know the pinout for it, which wire is for power, which is for ground, and which is for the signal wire. I unpinned mine, and forgot to take note of which wire went where. Thanks! Russell __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

08-08-2005, 04:24 PM	#2
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Russell, I will be in the garage tonight. shoot me an email at webmaster@73-87chevytrucks.com and remind me to look before I go out. I think mine is still together. BTW, I just got a line on the 749 computer for my TPI. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-08-2005, 07:10 PM	#3
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Thank you Chris! Email is away __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

08-08-2005, 10:02 PM	#4
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Here is a pic of what I am needing. I'm pretty sure which are the VSS outputs, but I have no clue which pole is positive, and which pole is negative... Attached Images __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 08-08-2005 at 10:04 PM.

08-08-2005, 11:32 PM	#5
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Ok, here is what I have. I am looking this up right now. I couldn't find the plug on my spare harness, so I just checked out the '87. Attached Images __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-09-2005, 12:05 AM	#6
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Ok, far right on your pic is positive, then to the left is ground from what I found. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-09-2005, 12:09 AM	#7
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	That pic is all I needed Positive on the far right in my pic, ground in the center, and vss output on the left Thanks Chris! Now I just gotta pin that, and finish installing my headlight relay Then the rest of my dash can be put back together __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 08-09-2005 at 12:15 AM.

08-09-2005, 12:12 AM	#8
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	No problem. Glad to help out. I am going to have to figure this stuff out soon also. Send me some more pics of what you have going on. I need some motivation for the Jimmy. I hopefully will get the intake vatted this week. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-09-2005, 12:16 AM	#9
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Hehe, I can load you right up with pics Just gimme your email address and I'll send a whole lotta em! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 08-09-2005 at 12:16 AM.

08-09-2005, 12:31 AM	#10
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	That'd be your tired eyes, lol Though, that did get me to look again, lol __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

08-09-2005, 01:18 PM	#11
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Well, you can send them to the webmaster account. Hit me up! __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.