12 to 1 Quick ratio Steering Box... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KFreddy · 08-12-2005, 02:37 PM

Hi all,

I am looking to replace the stock power steering box with a 12 to 1 or 12.7 to 1 quick ratio power steering box. My truck is a 1972 C10 with a 454 engine. I am thinking that a Saginaw 800 would do the trick. Does the stock steering set up use a flare hose or a metric fitting? Also a 36(13/16) spline or 30 (3/4) spline?

Has anyone done this set up? Is there a known FAQ out there?

Thank you,

-Fred

speedracer · 08-13-2005, 12:10 PM

ccp sells a quick ratio gear box for our trucks

08-12-2005, 02:37 PM	#1
KFreddy Active Member Join Date: Apr 2005 Location: Miami, Florida Posts: 286	12 to 1 Quick ratio Steering Box... Hi all, I am looking to replace the stock power steering box with a 12 to 1 or 12.7 to 1 quick ratio power steering box. My truck is a 1972 C10 with a 454 engine. I am thinking that a Saginaw 800 would do the trick. Does the stock steering set up use a flare hose or a metric fitting? Also a 36(13/16) spline or 30 (3/4) spline? Has anyone done this set up? Is there a known FAQ out there? Thank you, -Fred

08-13-2005, 12:10 PM	#2
speedracer Blank Join Date: May 2005 Location: Southington, CT Posts: 221	ccp sells a quick ratio gear box for our trucks __________________ 1969 lwb 4/6 drop 17x8-18x10 torque thrust II's 327-420hp 2004R 3.73 posi. 1977 Corvette 350-375hp 4speed, silver show car. 2002 S10 xtreme, work truck 2004.5 VW jetta GLI 1.8T 6speed, weekend warrior. 2013 Audi A3 TDI, the wife's car

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.