Any intrest in trading Barn doors for Clam Shell?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMCjunkie · 08-21-2005, 09:10 AM

I have clam shell doors on my Burb right now, they are rusted to crap and literally falling apart. I have had a set of Barn doors for a few years now that I had planned on installing on my truck. Couple problems, Everyone keeps telling me what a b!tch it is to go from clam shell to Barn style. AND, not knowing what im doing, and having to do it by myself, I cant afford to have my truck torn apart for that long, as its my daily driver. Im thinking its just gonna be easier to stick with the calm shell if I can find another RUST FREE set. I have treated my barn doors on the inside with Por15 , sanded down the outside, they have just a couple small rust holes on the bottom of the doors. I have all the weather stripping, brand new in the pkg. I have used glass for both doors, and I THINK all the hard ware is there, most of the small stuff is still in a bucket, as I received it. Lemmie know if anyone is interested in trading, or even if someone has a set of clamshells for sale.
Thanks !!
junk

Long Roof · 08-21-2005, 09:36 PM

I'm not sure why it would be hard to change from one style to the other, as long as you have all the hardware including hinges. I have not done this but it sure looks like all the mounting points are there. Someone jump in with first hand experience.

Aaron

qksilver · 08-23-2005, 11:58 PM

It's hard because not all the holes are there for the striker and center latch set up plus the one of the lower hinges doesn't come out unless you jack the body off the frame. Other than that is really easy.
I have a set of clam shells that have some rust but are complete. I just got them from TOO MUCH Stuff in Grand Rapids MN. I drove up there on a parts run. They are still packed in my 99 burb.
Let me know and I can send some pix......I am 8 miles from Fort Bragg NC
Thanks,
Steve

08-21-2005, 09:10 AM	#1
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Any intrest in trading Barn doors for Clam Shell?? I have clam shell doors on my Burb right now, they are rusted to crap and literally falling apart. I have had a set of Barn doors for a few years now that I had planned on installing on my truck. Couple problems, Everyone keeps telling me what a b!tch it is to go from clam shell to Barn style. AND, not knowing what im doing, and having to do it by myself, I cant afford to have my truck torn apart for that long, as its my daily driver. Im thinking its just gonna be easier to stick with the calm shell if I can find another RUST FREE set. I have treated my barn doors on the inside with Por15 , sanded down the outside, they have just a couple small rust holes on the bottom of the doors. I have all the weather stripping, brand new in the pkg. I have used glass for both doors, and I THINK all the hard ware is there, most of the small stuff is still in a bucket, as I received it. Lemmie know if anyone is interested in trading, or even if someone has a set of clamshells for sale. Thanks !! junk __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

08-21-2005, 09:36 PM	#2
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	I'm not sure why it would be hard to change from one style to the other, as long as you have all the hardware including hinges. I have not done this but it sure looks like all the mounting points are there. Someone jump in with first hand experience. Aaron __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-23-2005, 11:58 PM	#3
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	It's hard because not all the holes are there for the striker and center latch set up plus the one of the lower hinges doesn't come out unless you jack the body off the frame. Other than that is really easy. I have a set of clam shells that have some rust but are complete. I just got them from TOO MUCH Stuff in Grand Rapids MN. I drove up there on a parts run. They are still packed in my 99 burb. Let me know and I can send some pix......I am 8 miles from Fort Bragg NC Thanks, Steve



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.