tire / wheel sizes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy garage · 08-19-2002, 11:40 PM

I'm planning to run 15x10's on rear of 70 swb with 285/70/15's. Will I have any clearance problems with a 2/4 drop?

Thanks.

Craig Wick · 08-20-2002, 01:17 AM

15x10 with 5 inch back spacing will fit.

chevy garage · 08-20-2002, 10:45 PM

Thanks for the info. I didn't want to get into trouble.

Longhorn Man · 08-20-2002, 11:12 PM

While I don't know the backspacing on my rims (they were there when i bought it) I can say that 275/60R15's fit with plenty of room on the sides, even when I had it loaded down and sagging about 5 inches. (fleet bed)

chevy garage · 08-20-2002, 11:22 PM

I just bought an old set of 200S American's. I think the backspace is 3 1/4. But I'm not sure. I bought 2 10's & 2 8.5's. I may have some problems. I'm getting the axles redrilled, so I'll have to wait and see.

Benrs86 · 08-20-2002, 11:27 PM

your cool with 3.25 and fleetside. im running 15 by 10s with 3.25" backspacing and 295/50s all around. TONS of room everywhere. the only semi-close spot is in the rear, the tires are close to the inside of the wheel well, but id say it still has 1, maybe 1.25" inches to spare. mine is stock hight tho, im planning to drop the front a coils height

im broke, if it dont work, ill get new springs. so i dont think anything bad could happen. hey, it will be a learning experience at the least. good luck man, Ben

chevy garage · 08-20-2002, 11:38 PM

Those 295's are about 10.5 or 11 inches wide aren't they?
I should be in good shape.

Thanks

Benrs86 · 08-20-2002, 11:44 PM

at the widest point in the bulge they are about 12.5" . they are the multi mile tire. dang, cant think of the name, but they are made my multi mile. heres a pic, but its a side shot

chevy garage · 08-21-2002, 09:01 PM

Thanks for the picture. You've got a nice truck. That helped me out.

Thanks

The Blue Pig · 08-23-2002, 05:26 AM

Hey Benrs86, I just wanted to let you know that your rear marker lens on your drivers side fell off.

You can thank me later.

08-19-2002, 11:40 PM	#1
chevy garage Registered User Join Date: Aug 2002 Location: Maryville, TN Posts: 239	tire / wheel sizes I'm planning to run 15x10's on rear of 70 swb with 285/70/15's. Will I have any clearance problems with a 2/4 drop? Thanks.

08-20-2002, 11:27 PM	#6
Benrs86 Registered User Join Date: Feb 2000 Location: Brandon, SD, USA Posts: 1,292	your cool with 3.25 and fleetside. im running 15 by 10s with 3.25" backspacing and 295/50s all around. TONS of room everywhere. the only semi-close spot is in the rear, the tires are close to the inside of the wheel well, but id say it still has 1, maybe 1.25" inches to spare. mine is stock hight tho, im planning to drop the front a coils height im broke, if it dont work, ill get new springs. so i dont think anything bad could happen. hey, it will be a learning experience at the least. good luck man, Ben __________________ Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04

08-20-2002, 11:44 PM	#8
Benrs86 Registered User Join Date: Feb 2000 Location: Brandon, SD, USA Posts: 1,292	at the widest point in the bulge they are about 12.5" . they are the multi mile tire. dang, cant think of the name, but they are made my multi mile. heres a pic, but its a side shot Attached Images __________________ Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04

08-23-2002, 05:26 AM	#10
The Blue Pig Thread Wizard Since 2002 Join Date: Apr 2002 Location: Fairbanks, AK Posts: 102	Hey Benrs86, I just wanted to let you know that your rear marker lens on your drivers side fell off. You can thank me later. __________________ --70 C-10 Longbed --71 C-10 Longbed --72 K-20 Longbed --74 C-10 Shortbed --86 Toyota Tercel (His Driver) --05 Chevy Trailblazer (Her Driver)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-20-2002, 01:17 AM	#2
Craig Wick Registered User Join Date: Aug 2002 Location: Auburn, WA Posts: 4	15x10 with 5 inch back spacing will fit.

08-20-2002, 10:45 PM	#3
chevy garage Registered User Join Date: Aug 2002 Location: Maryville, TN Posts: 239	Thanks for the info. I didn't want to get into trouble.

08-20-2002, 11:12 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	While I don't know the backspacing on my rims (they were there when i bought it) I can say that 275/60R15's fit with plenty of room on the sides, even when I had it loaded down and sagging about 5 inches. (fleet bed)

08-20-2002, 11:22 PM	#5
chevy garage Registered User Join Date: Aug 2002 Location: Maryville, TN Posts: 239	I just bought an old set of 200S American's. I think the backspace is 3 1/4. But I'm not sure. I bought 2 10's & 2 8.5's. I may have some problems. I'm getting the axles redrilled, so I'll have to wait and see.

08-20-2002, 11:38 PM	#7
chevy garage Registered User Join Date: Aug 2002 Location: Maryville, TN Posts: 239	Those 295's are about 10.5 or 11 inches wide aren't they? I should be in good shape. Thanks

08-21-2002, 09:01 PM	#9
chevy garage Registered User Join Date: Aug 2002 Location: Maryville, TN Posts: 239	Thanks for the picture. You've got a nice truck. That helped me out. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.