Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-28-2005, 11:17 PM | #1 |
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Tranny cooler question
Anyone here mount a tranny cooler any place other than in front of the radiator I would like to mount it under the cab or bed area? Any thoughts on this??? BTW I bought a B@M SUPER COOLER 70268 for a 13,000 btu..
__________________
GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
08-29-2005, 12:00 AM | #2 |
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
well the cooler needs to have air pass thru it......
unless it has a fan mounted on it.......in front of the rad... or a/c cond... would give you max cooling........i run two on my 85.....one up front one lower with a fan mounted cooler......5200 stall heat's up......big time...... a trans brake sends the temp thru the roof.......just IMO |
08-29-2005, 12:22 AM | #3 |
Nothing fits but the oil
Join Date: Mar 2003
Location: Gaston, Indiana
Posts: 424
|
I have an in-the-frame rail cooler for my TH350, works great, can't see it either.
__________________
Land of the free Because of the brave |
08-29-2005, 07:00 PM | #4 |
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
I don't have anything fancy just a th400 with a kit in it..... Guess I will look fo a little e-fan to stick on it ... Thanks guy's..
__________________
GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
08-29-2005, 07:03 PM | #5 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
You can buy remote trans cooler w/fan and they can be mounted behind the cab up under the bed...... seen it done looks good .
|
08-29-2005, 07:39 PM | #6 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
they make a heat sink cas aluminum frame rial mounted tranny cooler ,they work well and don't require a fan//
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
08-29-2005, 09:48 PM | #7 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|