disc/disc Mastercyl and prop valve - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 10-23-2005, 10:53 PM

Anybody need one of these I bought it to use on my street strip truck but never got to use it! I take 100.00 plus the ride!

Deuce · 10-23-2005, 10:54 PM

Quote:

Originally Posted by djracer

Anybody need one of these I bought it to use on my street strip truck but never got to use it! I take 100.00 plus the ride!

Any pics or part numbers??

djracer · 10-23-2005, 10:59 PM

I bought it from cpp they list three online and I'm not sure which one I bought! I can take pics tomorrow!

Deuce · 10-24-2005, 12:20 AM

That would be cool. Is it specific to our trucks??

djracer · 10-24-2005, 12:24 AM

yes it is made for our trucks!

aitch · 10-24-2005, 10:06 AM

I'm going to have disc/disc set up when I'm done on my 69, so I'm interested!

djracer · 10-24-2005, 11:57 AM

here's a couple of pics

Deuce · 10-24-2005, 12:06 PM

I don't see any pics??

djracer · 10-24-2005, 12:13 PM

sorry about that lets try again

Deuce · 10-24-2005, 02:29 PM

Any luck with a part number?? I'm interested!!

tomatocity · 10-24-2005, 02:35 PM

Quote:

Originally Posted by djracer

sorry about that lets try again

Look at your receipt for the CPP part number.

djracer · 10-24-2005, 04:57 PM

Part no

mcpvs-4r

http://www.classicperform.com/Store/...ks/MCPVS4R.htm

djracer · 11-11-2005, 03:54 AM

Bump

Deuce · 11-11-2005, 12:57 PM

Is it for the disc/disc or disc/drum set-up??

djracer · 11-11-2005, 01:15 PM

disc/disc

They say it will also work on camaro's or nova's and such also! I bought it to go on my 71 street/strip truck with disc/disc!

Kevin

4bynut · 11-11-2005, 04:10 PM

Please check shipping to 61014. Now this is a manual brake setup correct? You don't use a booster with it?

djracer · 11-11-2005, 07:21 PM

I'd ship it for 15.00 if its anymore I'll eat it! Yes it is for manual disc/disc. I do take paypal or postal money order.

Kevin

10-23-2005, 10:53 PM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	disc/disc Mastercyl and prop valve Anybody need one of these I bought it to use on my street strip truck but never got to use it! I take 100.00 plus the ride! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-23-2005, 10:59 PM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: disc/disc Mastercyl and prop valve I bought it from cpp they list three online and I'm not sure which one I bought! I can take pics tomorrow! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-24-2005, 12:20 AM	#4
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: disc/disc Mastercyl and prop valve That would be cool. Is it specific to our trucks?? __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

10-24-2005, 12:24 AM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: disc/disc Mastercyl and prop valve yes it is made for our trucks! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-24-2005, 10:06 AM	#6
aitch Senior Member Join Date: Sep 2004 Location: N.W. Arkansas Posts: 456	Re: disc/disc Mastercyl and prop valve I'm going to have disc/disc set up when I'm done on my 69, so I'm interested! __________________ 69 GMC 3/4 ton LWB 383 TH400 Dana 60 '84 300ZX '79 Nova (for sale)

10-24-2005, 11:57 AM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: disc/disc Mastercyl and prop valve here's a couple of pics __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-24-2005, 12:06 PM	#8
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: disc/disc Mastercyl and prop valve I don't see any pics?? __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

10-24-2005, 12:13 PM	#9
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: disc/disc Mastercyl and prop valve sorry about that lets try again Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-24-2005, 02:29 PM	#10
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: disc/disc Mastercyl and prop valve Any luck with a part number?? I'm interested!! __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

10-24-2005, 04:57 PM	#12
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: disc/disc Mastercyl and prop valve Part no mcpvs-4r http://www.classicperform.com/Store/...ks/MCPVS4R.htm __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-11-2005, 03:54 AM	#13
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: disc/disc Mastercyl and prop valve Bump __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-11-2005, 12:57 PM	#14
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: disc/disc Mastercyl and prop valve Is it for the disc/disc or disc/drum set-up?? __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

11-11-2005, 01:15 PM	#15
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: disc/disc Mastercyl and prop valve disc/disc They say it will also work on camaro's or nova's and such also! I bought it to go on my 71 street/strip truck with disc/disc! Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-11-2005, 04:10 PM	#16
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Re: disc/disc Mastercyl and prop valve Please check shipping to 61014. Now this is a manual brake setup correct? You don't use a booster with it? __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

11-11-2005, 07:21 PM	#17
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: disc/disc Mastercyl and prop valve I'd ship it for 15.00 if its anymore I'll eat it! Yes it is for manual disc/disc. I do take paypal or postal money order. Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.