Lets post up some curb weights! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mxman · 11-28-2005, 09:18 PM

Heya, i kind of want to figure out my trucks curb weight,

68 gmc 910, normal wheelbase, stock 12bolt, wooden bed (rotten

) 350 with 4 speed super t10 from a camaro, headers with front of wheel side exit exhaust. I remember weighing one of these trucks with a 350, a bunch of stuff in the back, 2 layers of wood in the box (dont ask me) we had it on a tow bar, and it weighed 3040 lbs on a towbar (obviously this is wrong)
so do these weigh like 5000 lbs (2 wd v8 ) or do they weigh around 4200 4800? thanks in advance

Longhorn Man · 11-28-2005, 10:07 PM

what is "normal wheelbase"?

My SWB GMC was just a hair under 4000
My longhorn is right at 5000

70c10swb · 11-28-2005, 10:52 PM

if we get enough info, could this be a sticky or a FAQ? This question seems to be asked alot

crazy longhorn · 11-28-2005, 11:01 PM

4240, with 1/2 tank fuel & the old fatman riding. I go 240, so empty that stripped old longhorn goes about 4 thou even.....she runs d@mn straight with the hammer down too(133" wb)

L

71chevylongbed · 11-29-2005, 01:00 AM

weighed my truck a couple months ago. '71 longbed 2wd with 350sb and th400 tranny and about 1/2 tank gas 4180 lbs.

GMC Jim · 11-29-2005, 06:36 AM

I can post the weights as published in the N.A.D.A price guides if that is what is wanted ???

**special-K** · 11-29-2005, 09:53 AM

This has got to be the epitome of truck talk.There needs to be a video game version to go along with"let`s count sand" and "NadaII".j/k
I go to the scrapyard alot and it never ceases to amaze me how it`s always a different weight.I can`t remember any,though.

mxman · 11-29-2005, 11:58 PM

i want to know, because i wann aknow how much im going to have to swiss cheese this piece of crap to make it fast

so COUNT THAT SAND MOFO!! hahaha... and yes, i remember there being 3 sizes of wheelbase or boxes, the swb, the regular and the longhorn that had a section physically welded onto the regular box... SO PUT THAT IN YOUR PIPE AND SMOKE IT...haha
but ya, i remember a guy drag racing a 68 gmc, had his weight down to like 2800 lbs

I would like to get around 3600 lbs or less

if possible

cableguy0 · 11-29-2005, 11:59 PM

for 3600lbs u best look into some fiberglass parts.

*1972C10* · 11-30-2005, 04:52 AM

My Short 72 Fleet Steel Bed Wieghs 3660 with a spare tire in the bed .

mxman · 11-30-2005, 10:09 AM

whoah 3660 lbs? anything changed around or parts taken off

?

BTW, not to be a jerk to everyone else, curb weight is very important for mileage and braking and acceleration, things you should be concerned with, especially if you are putting alot of money into a vehicle!

**truckdude239** · 11-30-2005, 10:58 AM

`umm mines more then i want to think about it took 6 guys to push it up the driveway the day the transmission went out ( and we must have been weak because that sucker was heavy)

jku72 · 11-30-2005, 01:20 PM

My Longhorn scaled at 5525, bed empty. I weigh 155. That was at the local pulp mill, coming out empty.

shelby987 · 11-30-2005, 04:40 PM

I would venture to say that the weight of the truck is likely one of the last issues that should be addressed if you want to race it.....a good working setup (engine, rearend, trans, suspension....and brakes!) really should be the first thing to be addressed. If you are going to 'swiss cheese' the truck and not go into putting on fiberglass panels, you are only going to lose so much weight.
Depending on what you want the truck to look like (show racer, or just a beater) You can dump the bumpers, gut the interior of the doors and replace skins with sheet tin, single driver seat, ditch inner fenders, all accessories (outside of the alternator), tailgate, might be able to cut up the inside of the bed and cover it to keep it presentable, drilled rotors, alloy or even steel wheels....that should all be good for a couple hundred pounds....back in the 60's pontiac engineers used to actually drill 2"-3.5" holes in the frame of catalinas to make 'super duties' so I guess that is also a possibility....but not one I would explore.

mxman · 11-30-2005, 07:50 PM

yeah, pretty familiar with gutting muahhahaah, i just want some solid weights for the sake of knowing

so far we have 3660 or so for a short wheelbase, and 4000 lbs or so for a longhorn ?.... anybody else ?

GMC Jim · 12-01-2005, 02:36 AM

Per a 1977 issue of N.A.D.A Used Car Guide:-

1972 Ship Weight

C10 - Pickup Stepside 6/12' ..........................3560
" " FleetSide 6 1/2' ........................3630
" " Stepside 8' ..............................3640
" " Fleetside 8' ............................. 3720
C20 - " " Stepside 8' ..............................3940
" " Fleetside 8' ..............................4030
" " Longhorn 8 1/2' .........................3950

The ship weight
is defined as the shipping weight less fuel, coolant and lubricants.
weights per gallon ( lbs per gallon) fuel - 6; oil - 7; water 8.
There appears to be an error as to the Longhorn weight; should be heavier than shown...

**special-K** · 12-01-2005, 11:18 PM

I think you can get`em to 3,000lbs.I think you can leave the frame alone,except to do suspension changes.

67-72chevyman · 12-02-2005, 04:24 PM

If your not going for looks, and are gonna drag race it you could lose a bunch of pounds by removing the bed. The bad part of this would be it probably wouldn't hook up to good. Back in the 70s my uncle used to race a old ford in the 4 wheel drive races. He removed the bed, doors, interier, all the glass and eventually shortened the frame, there was a bunch of trucks like that that raced back then.

mxman · 12-02-2005, 04:52 PM

Wow, good thread, keep it goin, thanks for the info on teh shippign weightsm btw : shipping weights often dont include grease, oil in engine, oil in transmission, oil in the differential, fuel in the tank, water in the block etc!

If it was a 4x4 thatd be different, weight woudlnt matter, infact i would encourage ballast and or lots of weight for heavy duty parts.

Are the coilspring trucks heavier than their leafspring counterparts?

Is the wooden bed REALLY that heavy? I was thinking of putting thin diamondplate in for ****s and giggles...

CraigS · 12-02-2005, 07:57 PM

1972 GMC 3/4 ton 4x4 with AC. 5750#.

67-72chevyman · 12-02-2005, 10:49 PM

I forgot to tell you, I forget where but I found a web page a couple years ago on the net, they were selling faberglass cabs and I think they sold fiberglass 67-72 cabs, but I definitly know they were selling 73-87 fiberglass cabs.

71Dragtruck · 12-02-2005, 10:56 PM

http://www.usbody.com/ you can get cabs, boxes, front ends, inner fenders.

mxman · 12-03-2005, 02:06 AM

whats funny is that on usbodysource.com they have those glass cabs that weigh like 50#'s or something, niiice

i wonder what that other crap weighs?

I remember way back in the day my friends dad made a drag truck that weighed 2800 lbs

1969K10 · 12-04-2005, 09:06 PM

My 69 K10 weight ~4200 lbs ~2600 is just the front axle on the scale, and ~1600 with just the rear axle on the scale

moneyguru · 12-04-2005, 09:37 PM

Wow my car weighs 3850 pounds....
Now I'm wondering what my GMC weighs!

11-28-2005, 09:18 PM	#1
mxman Registered User Join Date: Mar 2004 Location: Saskatoon sk Posts: 20	Lets post up some curb weights! Heya, i kind of want to figure out my trucks curb weight, 68 gmc 910, normal wheelbase, stock 12bolt, wooden bed (rotten ) 350 with 4 speed super t10 from a camaro, headers with front of wheel side exit exhaust. I remember weighing one of these trucks with a 350, a bunch of stuff in the back, 2 layers of wood in the box (dont ask me) we had it on a tow bar, and it weighed 3040 lbs on a towbar (obviously this is wrong) so do these weigh like 5000 lbs (2 wd v8 ) or do they weigh around 4200 4800? thanks in advance

11-28-2005, 10:07 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Lets post up some curb weights! what is "normal wheelbase"? My SWB GMC was just a hair under 4000 My longhorn is right at 5000

11-28-2005, 10:52 PM	#3
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	Re: Lets post up some curb weights! if we get enough info, could this be a sticky or a FAQ? This question seems to be asked alot __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

11-28-2005, 11:01 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: Lets post up some curb weights! 4240, with 1/2 tank fuel & the old fatman riding. I go 240, so empty that stripped old longhorn goes about 4 thou even.....she runs d@mn straight with the hammer down too(133" wb) L __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

11-29-2005, 01:00 AM	#5
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	Re: Lets post up some curb weights! weighed my truck a couple months ago. '71 longbed 2wd with 350sb and th400 tranny and about 1/2 tank gas 4180 lbs. __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

11-29-2005, 06:36 AM	#6
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	Re: Lets post up some curb weights! I can post the weights as published in the N.A.D.A price guides if that is what is wanted ??? __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

11-29-2005, 09:53 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Lets post up some curb weights! This has got to be the epitome of truck talk.There needs to be a video game version to go along with"let`s count sand" and "NadaII".j/k I go to the scrapyard alot and it never ceases to amaze me how it`s always a different weight.I can`t remember any,though. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-29-2005, 11:58 PM	#8
mxman Registered User Join Date: Mar 2004 Location: Saskatoon sk Posts: 20	Re: Lets post up some curb weights! i want to know, because i wann aknow how much im going to have to swiss cheese this piece of crap to make it fast so COUNT THAT SAND MOFO!! hahaha... and yes, i remember there being 3 sizes of wheelbase or boxes, the swb, the regular and the longhorn that had a section physically welded onto the regular box... SO PUT THAT IN YOUR PIPE AND SMOKE IT...haha but ya, i remember a guy drag racing a 68 gmc, had his weight down to like 2800 lbs I would like to get around 3600 lbs or less if possible

11-29-2005, 11:59 PM	#9
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: Lets post up some curb weights! for 3600lbs u best look into some fiberglass parts. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

11-30-2005, 04:52 AM	#10
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Re: Lets post up some curb weights! My Short 72 Fleet Steel Bed Wieghs 3660 with a spare tire in the bed .

11-30-2005, 10:09 AM	#11
mxman Registered User Join Date: Mar 2004 Location: Saskatoon sk Posts: 20	Re: Lets post up some curb weights! whoah 3660 lbs? anything changed around or parts taken off ? BTW, not to be a jerk to everyone else, curb weight is very important for mileage and braking and acceleration, things you should be concerned with, especially if you are putting alot of money into a vehicle! Last edited by mxman; 11-30-2005 at 10:11 AM.

11-30-2005, 10:58 AM	#12
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Lets post up some curb weights! `umm mines more then i want to think about it took 6 guys to push it up the driveway the day the transmission went out ( and we must have been weak because that sucker was heavy) __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

11-30-2005, 01:20 PM	#13
jku72 Registered User Join Date: Jan 2002 Location: cornville, maine Posts: 659	Re: Lets post up some curb weights! My Longhorn scaled at 5525, bed empty. I weigh 155. That was at the local pulp mill, coming out empty. __________________ jku Cornville, Maine 68 C10 burb 42 Willys MB 46 Dodge WF-32 1.5 ton 53 & 56 Olds' 60 Cadillac 22 Dodge Brothers

11-30-2005, 04:40 PM	#14
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: Lets post up some curb weights! I would venture to say that the weight of the truck is likely one of the last issues that should be addressed if you want to race it.....a good working setup (engine, rearend, trans, suspension....and brakes!) really should be the first thing to be addressed. If you are going to 'swiss cheese' the truck and not go into putting on fiberglass panels, you are only going to lose so much weight. Depending on what you want the truck to look like (show racer, or just a beater) You can dump the bumpers, gut the interior of the doors and replace skins with sheet tin, single driver seat, ditch inner fenders, all accessories (outside of the alternator), tailgate, might be able to cut up the inside of the bed and cover it to keep it presentable, drilled rotors, alloy or even steel wheels....that should all be good for a couple hundred pounds....back in the 60's pontiac engineers used to actually drill 2"-3.5" holes in the frame of catalinas to make 'super duties' so I guess that is also a possibility....but not one I would explore. __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

11-30-2005, 07:50 PM	#15
mxman Registered User Join Date: Mar 2004 Location: Saskatoon sk Posts: 20	Re: Lets post up some curb weights! yeah, pretty familiar with gutting muahhahaah, i just want some solid weights for the sake of knowing so far we have 3660 or so for a short wheelbase, and 4000 lbs or so for a longhorn ?.... anybody else ?



Register or Log In To remove these advertisements.

12-01-2005, 02:36 AM	#16
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	Re: Lets post up some curb weights! Per a 1977 issue of N.A.D.A Used Car Guide:- 1972 Ship Weight C10 - Pickup Stepside 6/12' ..........................3560 " " FleetSide 6 1/2' ........................3630 " " Stepside 8' ..............................3640 " " Fleetside 8' ............................. 3720 C20 - " " Stepside 8' ..............................3940 " " Fleetside 8' ..............................4030 " " Longhorn 8 1/2' .........................3950 The ship weight is defined as the shipping weight less fuel, coolant and lubricants. weights per gallon ( lbs per gallon) fuel - 6; oil - 7; water 8. There appears to be an error as to the Longhorn weight; should be heavier than shown... __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

12-01-2005, 11:18 PM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Lets post up some curb weights! I think you can get`em to 3,000lbs.I think you can leave the frame alone,except to do suspension changes. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-02-2005, 04:24 PM	#18
67-72chevyman Registered User Join Date: Oct 2005 Location: West Virginia Posts: 136	Re: Lets post up some curb weights! If your not going for looks, and are gonna drag race it you could lose a bunch of pounds by removing the bed. The bad part of this would be it probably wouldn't hook up to good. Back in the 70s my uncle used to race a old ford in the 4 wheel drive races. He removed the bed, doors, interier, all the glass and eventually shortened the frame, there was a bunch of trucks like that that raced back then. Last edited by 67-72chevyman; 12-02-2005 at 04:30 PM.

12-02-2005, 04:52 PM	#19
mxman Registered User Join Date: Mar 2004 Location: Saskatoon sk Posts: 20	Re: Lets post up some curb weights! Wow, good thread, keep it goin, thanks for the info on teh shippign weightsm btw : shipping weights often dont include grease, oil in engine, oil in transmission, oil in the differential, fuel in the tank, water in the block etc! If it was a 4x4 thatd be different, weight woudlnt matter, infact i would encourage ballast and or lots of weight for heavy duty parts. Are the coilspring trucks heavier than their leafspring counterparts? Is the wooden bed REALLY that heavy? I was thinking of putting thin diamondplate in for ****s and giggles...

12-02-2005, 07:57 PM	#20
CraigS Registered User Join Date: Dec 2000 Location: Gresham, OR, USA Posts: 106	Re: Lets post up some curb weights! 1972 GMC 3/4 ton 4x4 with AC. 5750#. __________________ 72 GMC K20, 454, TH350 00 GMC Yukon 66 Ford Bronco

12-02-2005, 10:49 PM	#21
67-72chevyman Registered User Join Date: Oct 2005 Location: West Virginia Posts: 136	Re: Lets post up some curb weights! I forgot to tell you, I forget where but I found a web page a couple years ago on the net, they were selling faberglass cabs and I think they sold fiberglass 67-72 cabs, but I definitly know they were selling 73-87 fiberglass cabs.

12-02-2005, 10:56 PM	#22
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Lets post up some curb weights! http://www.usbody.com/ you can get cabs, boxes, front ends, inner fenders. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

12-03-2005, 02:06 AM	#23
mxman Registered User Join Date: Mar 2004 Location: Saskatoon sk Posts: 20	Re: Lets post up some curb weights! whats funny is that on usbodysource.com they have those glass cabs that weigh like 50#'s or something, niiice i wonder what that other crap weighs? I remember way back in the day my friends dad made a drag truck that weighed 2800 lbs

12-04-2005, 09:06 PM	#24
1969K10 Senior Member Join Date: Jul 2004 Location: Clarks Hill, Indiana Posts: 733	Re: Lets post up some curb weights! My 69 K10 weight ~4200 lbs ~2600 is just the front axle on the scale, and ~1600 with just the rear axle on the scale

12-04-2005, 09:37 PM	#25
moneyguru Registered User Join Date: Oct 2002 Location: kalamazoo, mi Posts: 397	Re: Lets post up some curb weights! Wow my car weighs 3850 pounds.... Now I'm wondering what my GMC weighs! __________________ "Do the things you fear to do and the death of fear is certain"

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode